Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
Nw​ = 30z = 4, 2900 rpm

A worm with 4 start(s) turns at 2900 rpm and drives a worm wheel with 30 teeth. Find the speed nw of the wheel.

z = 4Nw = 30n = 2900 rpm
nw = rpm
2.Gears & gear trainsHard
d1​ = 160 mmd2​ = 250 mm2880 rpmC = 600 mmθ = ?

An open belt connects a 160 mm pulley and a 250 mm pulley whose centres are 600 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 160 mmd2 = 250 mmC = 600 mm
θ = °
3.Torsion of shaftsMedium
d1​ = 75 mmd2​ = 25 mmT = 500 N·mABC1 m0.8 m

A stepped solid brass shaft is fixed at A. Segment AB has diameter 75 mm and length 1 m; segment BC has diameter 25 mm and length 0.8 m. A torque of 500 N·m acts at the free end C. Find the angle of twist φC of end C, in degrees.

T = 500 N·md1 = 75 mm, L1 = 1 md2 = 25 mm, L2 = 0.8 mG = 39 GPa
φC = °
4.Torsion of shaftsHard
Tdo​ = 40 mm, di​ = 24 mm

A hollow shaft transmits 75 kW at 1450 rpm. Find the maximum shear stress τmax in the shaft.

P = 75 kWN = 1450 rpmdo = 40 mmdi = 24 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = 90σy​ = −50MPaτxy​ = ?

A point has σₓ = 90 MPa and σᵧ = −50 MPa. How large can the shear stress τxy (magnitude) become before the largest principal stress reaches 130 MPa?

σx = 90 MPaσy = −50 MPaσ1 = 130 MPa
τxy = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 60σy​ = 110τxy​ = 40MPa

A point in a loaded part has σₓ = 60 MPa, σᵧ = 110 MPa and τₓᵧ = 40 MPa (tension positive). Find the normal stress σθ on a plane whose normal is rotated 25° counter-clockwise from the x-axis.

σx = 60 MPaσy = 110 MPaτxy = 40 MPaθ = 25°
σθ = MPa
7.Axial stress & strainMedium
Ø 30 mmSteel1 mP = 110 kN

Find the axial strain ε in the steel bar, in microstrain (µε = 10⁻⁶).

P = 110 kNd = 30 mmL = 1 mE = 200 GPa
ε = µε
8.Axial stress & strainHard
80 kN12400 mm200 mmØ25Ø30σ2​ = ?

A steel segment (diameter 25 mm, length 400 mm, E = 200 GPa) and a segment made of copper (diameter 30 mm, length 200 mm, E = 120 GPa) are joined end to end and fixed between two rigid walls. An axial load of 80 kN acts at the joint, towards segment 2. Find the magnitude of the stress σ2 in segment 2.

segment 1: steel, Ø25 mm, 400 mm, E = 200 GPasegment 2: copper, Ø30 mm, 200 mm, E = 120 GPaP = 80 kN
σ2 = MPa
9.Column bucklingMedium
PL = 6 m50 × 60 mmcross-section

A column of length L made of steel is fixed at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 6 mE = 200 GPa (steel)b × h = 50 × 60 mm
Pcr = kN
10.Column bucklingHard
PL = 5 md = 60 mmcross-section

A column of length L made of steel is fixed at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 5 mE = 200 GPa (steel)d = 60 mm
σcr = MPa
11.Mechanical vibrationsMedium
tx30 mm3 cycles20.6 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 30 mm is followed 3 cycles later by a peak of 20.6 mm. Find the damping ratio ζ.

x0 = 30 mmx3 = 20.6 mmn = 3
ζ =
12.Mechanical vibrationsHard
k1​ = 80k2​ = 10k3​ = 25m = 50 kg

A 50 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 80 kN/m and k₂ = 10 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 80 kN/mk2 = 10 kN/mk3 = 25 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: nw = 386.7 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 2900·4/30 = 386.7 rpm

Answer

nw = 386.7 rpm
2.Gears & gear trains

Answer: θ = 171.4 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.075) = 4.301°

Angle of wrap

θ = 180 − 2·4.301 = 171.4°

Answer

θ = 171.4°
3.Torsion of shafts

Answer: φC = 15.56 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar moments

J1 = π·75⁴/32 = 3.106 × 10⁶ mm⁴
J2 = π·25⁴/32 = 38350 mm⁴

Twist of each segment

T = 500 N·m = 500000 N·mm
G = 39 GPa = 39000 MPa
φAB = 500000·1000/(39000·3.106 × 10⁶) = 0.004127 rad
φBC = 500000·800/(39000·38350) = 0.2674 rad

Total twist

φC = 0.004127 + 0.2674 = 0.2716 rad = 15.56°

Answer

φC = 15.56°
4.Torsion of shafts

Answer: τmax = 45.16 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1450/60 = 151.8 rad/s
T = P/ω = 75000/151.8 = 493.9 N·m

Polar second moment of area

J = π(40⁴ − 24⁴)/32 = 218755 mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 493929·20/218755 = 45.16 MPa

Answer

τmax = 45.16 MPa
5.Mohr’s circle & stress transformation

Answer: τxy = 84.85 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Required radius

C = (90 + (−50))/2 = 20 MPa
R = σ1 − C = 130 − 20 = 110 MPa
στxyCσ1​σ2​

Shear stress

τxy = √(R² − ((σₓ − σᵧ)/2)²) = √(110² − 70²) = 84.85 MPa

Answer

τxy = 84.85 MPa
6.Mohr’s circle & stress transformation

Answer: σθ = 99.57 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

σθ = 85 + −25·0.6428 + 40·0.766 = 99.57 MPa

Answer

σθ = 99.57 MPa
7.Axial stress & strain

Answer: ε = 778.1 µε

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·30²/4 = 706.9 mm²
σ = P/A = 110·1000/706.9 = 155.6 MPa

Strain (Hooke’s law)

E for steel = 200 GPa = 200000 MPa.

ε = σ/E = 155.6/200000 = 0.0007781 = 778.1 µε

Answer

ε = 778.1 µε
8.Axial stress & strain

Answer: σ2 = 71.69 MPa

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Stiffnesses

k₁ = 200000·490.9/400 = 245437 N/mm
k₂ = 120000·706.9/200 = 424115 N/mm

Share of segment 2

F2 = 80000·424115/669552 = 50674 N

Stress

σ2 = 50674/706.9 = 71.69 MPa (compression)

Answer

σ2 = 71.69 MPa
9.Column buckling

Answer: Pcr = 137.1 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 60·50³/12 = 625000 mm⁴

Effective length

KL = 0.5·6000 = 3000 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·625000/3000² = 137078 N = 137.1 kN

Answer

Pcr = 137.1 kN
10.Column buckling

Answer: σcr = 71.06 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Radius of gyration and slenderness

A = 2827 mm²
r = √(I/A) = √(636173/2827) = 15 mm
KL = 0.5·5000 = 2500 mm
KL/r = 2500/15 = 166.7

Critical stress

σcr = π²E/(KL/r)² = π²·200000/166.7² = 71.06 MPa

Answer

σcr = 71.06 MPa
11.Mechanical vibrations

Answer: ζ = 0.01994

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/3)·ln(30/20.6) = 0.1253

Damping ratio

ζ = δ/√(4π² + δ²) = 0.1253/√(39.48 + 0.0157) = 0.01994

Answer

ζ = 0.01994
12.Mechanical vibrations

Answer: fn = 3.148 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 80 + 10 = 90 kN/m
keq = 90·25/(90 + 25) = 19.57 kN/m

Natural frequency

ωn = √(19565/50) = 19.78 rad/s
fn = 19.78/(2π) = 3.148 Hz

Answer

fn = 3.148 Hz

ExamProblems · examproblems.com/courses/machine-design