Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
d1​ = 125 mmd2​ = 400 mm1450 rpmn2​ = ?

A 125 mm pulley at 1450 rpm drives a 400 mm pulley by a belt with 1 % slip. Find the speed n2 of the driven pulley.

n1 = 1450 rpmd1 = 125 mmd2 = 400 mms = 1 %
n2 = rpm
2.Gears & gear trainsHard
A = 18B = 30C = 40D = 60

An 11 kW motor at 1450 rpm drives gear A (18 teeth), which meshes with gear B (30 teeth). Gear C (40 teeth) on the same shaft as B drives gear D (60 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.

P = 11 kWnin = 1450 rpmA = 18B = 30C = 40D = 60ηmesh = 97%
Tout = N·m
3.Torsion of shaftsMedium
T = 750 N·md = 40 mmL = 3 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 750 N·md = 40 mmL = 3 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
Tdo​ = 80 mm, di​ = 60 mm

A hollow shaft transmits 30 kW at 750 rpm. Find the maximum shear stress τmax in the shaft.

P = 30 kWN = 750 rpmdo = 80 mmdi = 60 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = −60σy​ = 100τxy​ = 40MPa

A point has σₓ = −60 MPa, σᵧ = 100 MPa and τₓᵧ = 40 MPa (tension positive). The element is rotated 20° clockwise. Find the normal stress σy′ on the faces of the rotated element that are perpendicular to the rotated y′-axis.

σx = −60 MPaσy = 100 MPaτxy = 40 MPaθ = -20°
σy′ = MPa
6.Mohr’s circle & stress transformationHard
σx​τxy​surface of the shaft

A solid shaft of diameter 25 mm carries an axial compressive force of 200 kN together with a torque of 200 N·m. At the surface of the shaft, find the largest principal stress σ1.

d = 25 mmF = −200 kNT = 200 N·m
σ1 = MPa
7.Axial stress & strainMedium
P = ?12600 mm500 mmØ30Ø50δ = 0.2 mm

A bar is made of a steel segment (diameter 30 mm, length 600 mm, E = 200 GPa) joined end to end with a segment made of bronze (diameter 50 mm, length 500 mm, E = 110 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.2 mm in total.

segment 1: steel, Ø30 mm, 600 mm, E = 200 GPasegment 2: bronze, Ø50 mm, 500 mm, E = 110 GPaδ = 0.2 mm
P = kN
8.Axial stress & strainHard
Ø 30 mmSteel1.5 mØ 20 mmSteel1 mP = 110 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the largest normal stress σmax in the bar.

P = 110 kNsegment 1: Ø30 mm, 1.5 m, steel (E = 200 GPa)segment 2: Ø20 mm, 1 m, steel (E = 200 GPa)
σmax = MPa
9.Column bucklingMedium
PL = 5 m30 × 80 mmcross-section

A column of length L made of aluminium is pinned at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 5 mE = 70 GPa (aluminium)b × h = 30 × 80 mm
Pcr = kN
10.Column bucklingHard
P = 90 kNL = 4 md = ?cross-section

A solid round column of length L made of steel is fixed at the base and free at the top. It must carry 90 kN with a factor of safety of 2 against buckling. Find the smallest diameter d.

P = 90 kNn = 2L = 4 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
k = 50 kN/mc = 400 N·s/mm = 5 kg

A 5 kg mass is supported by a spring with a stiffness of 50 kN/m and a viscous damper with a damping coefficient of 400 N·s/m. Find the damping ratio ζ.

m = 5 kgk = 50 kN/mc = 400 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 25k2​ = 100k3​ = 100m = 40 kg

A 40 kg mass hangs from spring k₃ = 100 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 25 kN/m and k₂ = 100 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 25 kN/mk2 = 100 kN/mk3 = 100 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: n2 = 448.6 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1450·125/400 = 453.1 rpm

With slip

n2 = 453.1·0.99 = 448.6 rpm

Answer

n2 = 448.6 rpm
2.Gears & gear trains

Answer: Tout = 170.4 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1450·(18/30)·(40/60) = 580 rpm
ωout = 2π·580/60 = 60.74 rad/s

Output power and torque

Pout = 11000·0.97² = 10350 W
Tout = Pout/ωout = 10350/60.74 = 170.4 N·m

Answer

Tout = 170.4 N·m
3.Torsion of shafts

Answer: φ = 6.412 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·40⁴/32 = 251327 mm⁴

Angle of twist

φ = TL/(GJ) = 750·1000·3000/(80000·251327) = 0.1119 rad
φ = 0.1119·180/π = 6.412°

Answer

φ = 6.412°
4.Torsion of shafts

Answer: τmax = 5.558 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·750/60 = 78.54 rad/s
T = P/ω = 30000/78.54 = 382 N·m

Polar second moment of area

J = π(80⁴ − 60⁴)/32 = 2.749 × 10⁶ mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 381972·40/2.749 × 10⁶ = 5.558 MPa

Answer

τmax = 5.558 MPa
5.Mohr’s circle & stress transformation

Answer: σy′ = 107 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation for the y′ face

σy′ = 20 − (−80)·0.766 − 40·(−0.6428) = 107 MPa

Check

The sum of the normal stresses does not change with rotation.

σx′ = −67 MPa, σx′ + σy′ = 40 = σx + σy

Answer

σy′ = 107 MPa
6.Mohr’s circle & stress transformation

Answer: σ1 = 10.18 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Stresses at the surface

σ = F/A = −200000/(π·25²/4) = −200000/490.9 = −407.4 MPa
τ = 16T/(πd³) = 16·200000/(π·25³) = 65.19 MPa
στxyCσ1​σ2​

Mohr’s circle

C = σ/2 = −203.7 MPa
R = √((−203.7)² + 65.19²) = 213.9 MPa
σ1 = C + R = 10.18 MPa
σ2 = C − R = −417.6 MPa

Answer

σ1 = 10.18 MPa
7.Axial stress & strain

Answer: P = 30.49 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 706.9 mm², A₂ = 1963 mm²

Flexibilities

L₁/(E₁A₁) = 600/(200000·706.9) = 4.244 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 500/(110000·1963) = 2.315 × 10⁻⁶ mm/N

Load

P = 0.2/6.559 × 10⁻⁶ = 30492 N = 30.49 kN

Answer

P = 30.49 kN
8.Axial stress & strain

Answer: σmax = 350.1 MPa

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·30²/4 = 706.9 mm², A2 = π·20²/4 = 314.2 mm²
σ1 = 155.6 MPa
σ2 = 350.1 MPa

Largest stress

The thinner segment has the smaller area, so it carries the larger stress.

σmax = 350.1 MPa

Answer

σmax = 350.1 MPa
9.Column buckling

Answer: Pcr = 4.974 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 80·30³/12 = 180000 mm⁴

Effective length

KL = 1·5000 = 5000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·180000/5000² = 4974 N = 4.974 kN

Answer

Pcr = 4.974 kN
10.Column buckling

Answer: d = 104.4 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2·90000 = 180000 N
KL = 2·4000 = 8000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·180000·8000²/(π³·200000))^(1/4) = 104.4 mm

Answer

d = 104.4 mm

Check: the slenderness KL/r is 306.5, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.4

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(50000·5) = 1000 N·s/m

Damping ratio

ζ = c/cc = 400/1000 = 0.4

Answer

ζ = 0.4

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: fn = 5.931 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 25 + 100 = 125 kN/m
keq = 125·100/(125 + 100) = 55.56 kN/m

Natural frequency

ωn = √(55556/40) = 37.27 rad/s
fn = 37.27/(2π) = 5.931 Hz

Answer

fn = 5.931 Hz

ExamProblems · examproblems.com/courses/machine-design