Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 30N2​ = 60

A 4 kW motor running at 2900 rpm drives a pinion with 30 teeth, which meshes with a gear with 60 teeth. The gear pair has an efficiency of 98%. Find the torque T1 on the motor shaft.

P = 4 kWn1 = 2900 rpmN1 = 30N2 = 60η = 98%
T1 = N·m
2.Gears & gear trainsHard
A = 20B = 25C = 25D = 40

In a compound gear train, gear A (20 teeth) on the input shaft turning at 1500 rpm drives gear B (25 teeth). Gear C (25 teeth) is fixed to the same shaft as B and drives gear D (40 teeth) on the output shaft. Find the output speed nout.

nin = 1500 rpmA = 20B = 25C = 25D = 40
nout = rpm
3.Torsion of shaftsMedium
T = 400 N·md = 50 mmL = 2 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 400 N·md = 50 mmL = 2 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
d = ?75 kW, 500 rpm

A solid brass shaft transmits 75 kW at 500 rpm. The shear stress must not exceed 75 MPa and the twist must not exceed 1° per m of length. Find the smallest diameter d that satisfies both limits.

P = 75 kWN = 500 rpmτallow = 75 MPaθallow = 1°/mG = 39 GPa
d = mm
5.Mohr’s circle & stress transformationMedium
σy​ = −30τxy​ = −10MPa

A point has σₓ = 0 MPa, σᵧ = −30 MPa and τₓᵧ = −10 MPa (tension positive). The element is rotated 30° counter-clockwise. Find the normal stress σy′ on the faces of the rotated element that are perpendicular to the rotated y′-axis.

σx = 0 MPaσy = −30 MPaτxy = −10 MPaθ = 30°
σy′ = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 110σy​ = 60τxy​ = 60MPa

A point in a loaded part has σₓ = 110 MPa, σᵧ = 60 MPa and τₓᵧ = 60 MPa (tension positive). Find the shear stress τθ on a plane whose normal is rotated 35° counter-clockwise from the x-axis (positive in the same sense as τₓᵧ).

σx = 110 MPaσy = 60 MPaτxy = 60 MPaθ = 35°
τθ = MPa
7.Axial stress & strainMedium
Ø 12 mmCopper1 mP = 15 kN

Find the elongation δ of the copper bar under the axial load.

P = 15 kNd = 12 mmL = 1 mE = 117 GPa
δ = mm
8.Axial stress & strainHard
30 kN12300 mm500 mmØ20Ø30σ2​ = ?

A steel segment (diameter 20 mm, length 300 mm, E = 200 GPa) and a segment made of aluminium (diameter 30 mm, length 500 mm, E = 70 GPa) are joined end to end and fixed between two rigid walls. An axial load of 30 kN acts at the joint, towards segment 2. Find the magnitude of the stress σ2 in segment 2.

segment 1: steel, Ø20 mm, 300 mm, E = 200 GPasegment 2: aluminium, Ø30 mm, 500 mm, E = 70 GPaP = 30 kN
σ2 = MPa
9.Column bucklingMedium
PL = 2.5 md = 50 mmcross-section

A column of length L made of steel is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 2.5 mE = 200 GPa (steel)d = 50 mm
Pcr = kN
10.Column bucklingHard
PL = 2.5 md = 30 mmcross-section

A column of length L made of steel is fixed at the base and free at the top. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 2.5 mE = 200 GPa (steel)d = 30 mm
σcr = MPa
11.Mechanical vibrationsMedium
tx15 mm4 cycles1.2 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 15 mm is followed 4 cycles later by a peak of 1.2 mm. Find the damping ratio ζ.

x0 = 15 mmx4 = 1.2 mmn = 4
ζ =
12.Mechanical vibrationsHard
k1​ = 100k2​ = 40m = 50 kg

A 50 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 100 kN/m and k₂ = 40 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 50 kgk1 = 100 kN/mk2 = 40 kN/m
keq = kN/m

3Solutions

1.Gears & gear trains

Answer: T1 = 13.17 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·2900/60 = 303.7 rad/s
T1 = P/ω₁ = 4000/303.7 = 13.17 N·m

Answer

T1 = 13.17 N·m
2.Gears & gear trains

Answer: nout = 750 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1500·20/25 = 1200 rpm = nC

Second stage

nout = 1200·25/40 = 750 rpm

Answer

nout = 750 rpm

total ratio = 2 : 1

3.Torsion of shafts

Answer: φ = 0.9338 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·50⁴/32 = 613592 mm⁴

Angle of twist

φ = TL/(GJ) = 400·1000·2000/(80000·613592) = 0.0163 rad
φ = 0.0163·180/π = 0.9338°

Answer

φ = 0.9338°
4.Torsion of shafts

Answer: d = 68.04 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·500/60 = 52.36 rad/s
T = P/ω = 75000/52.36 = 1432 N·m

Diameter for strength

T = 1432 N·m = 1.432 × 10⁶ N·mm
dτ = ∛(16·1.432 × 10⁶/(π·75)) = 45.99 mm

Diameter for stiffness

θ = 1·π/180/1000 = 1.745 × 10⁻⁵ rad/mm
G = 39 GPa = 39000 MPa
dφ = (32·1.432 × 10⁶/(π·39000·1.745 × 10⁻⁵))1/4 = 68.04 mm

Governing diameter

Both limits must hold, so the larger diameter governs.

d = max(45.99, 68.04) = 68.04 mm

Answer

d = 68.04 mm

Here stiffness governs.

5.Mohr’s circle & stress transformation

Answer: σy′ = −13.84 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation for the y′ face

σy′ = −15 − 15·0.5 − (−10)·0.866 = −13.84 MPa

Check

The sum of the normal stresses does not change with rotation.

σx′ = −16.16 MPa, σx′ + σy′ = −30 = σx + σy

Answer

σy′ = −13.84 MPa
6.Mohr’s circle & stress transformation

Answer: τθ = −2.971 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

τθ = −25·0.9397 + 60·0.342 = −2.971 MPa

Answer

τθ = −2.971 MPa
7.Axial stress & strain

Answer: δ = 1.134 mm

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·12²/4 = 113.1 mm²
σ = P/A = 15·1000/113.1 = 132.6 MPa

Strain (Hooke’s law)

E for copper = 117 GPa = 117000 MPa.

ε = σ/E = 132.6/117000 = 0.001134 = 1134 µε

Elongation

δ = ε·L = 0.001134·1000 mm = 1.134 mm

Answer

δ = 1.134 mm
8.Axial stress & strain

Answer: σ2 = 13.62 MPa

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Stiffnesses

k₁ = 200000·314.2/300 = 209440 N/mm
k₂ = 70000·706.9/500 = 98960 N/mm

Share of segment 2

F2 = 30000·98960/308400 = 9626 N

Stress

σ2 = 9626/706.9 = 13.62 MPa (compression)

Answer

σ2 = 13.62 MPa
9.Column buckling

Answer: Pcr = 197.7 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·50⁴/64 = 306796 mm⁴

Effective length

KL = 0.7·2500 = 1750 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·306796/1750² = 197744 N = 197.7 kN

Answer

Pcr = 197.7 kN
10.Column buckling

Answer: σcr = 4.441 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·30⁴/64 = 39761 mm⁴

Radius of gyration and slenderness

A = 706.9 mm²
r = √(I/A) = √(39761/706.9) = 7.5 mm
KL = 2·2500 = 5000 mm
KL/r = 5000/7.5 = 666.7

Critical stress

σcr = π²E/(KL/r)² = π²·200000/666.7² = 4.441 MPa

Answer

σcr = 4.441 MPa
11.Mechanical vibrations

Answer: ζ = 0.09999

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/4)·ln(15/1.2) = 0.6314

Damping ratio

ζ = δ/√(4π² + δ²) = 0.6314/√(39.48 + 0.3987) = 0.09999

Answer

ζ = 0.09999
12.Mechanical vibrations

Answer: keq = 140 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 100 + 40 = 140 kN/m

Answer

keq = 140 kN/m

ExamProblems · examproblems.com/courses/machine-design