Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
d1​ = 100 mmd2​ = 315 mm720 rpmT1​ = 600 NT2​ = 300 NP = ?

A belt runs on a 100 mm driving pulley at 720 rpm. The tension is 600 N on the tight side and 300 N on the slack side. Find the power P transmitted, in kW.

d1 = 100 mmn1 = 720 rpmT1 = 600 NT2 = 300 N
P = kW
2.Gears & gear trainsHard
A = 45B = 80C = 16D = 24

In a compound gear train, gear A (45 teeth) on the input shaft turning at 960 rpm drives gear B (80 teeth). Gear C (16 teeth) is fixed to the same shaft as B and drives gear D (24 teeth) on the output shaft. Find the output speed nout.

nin = 960 rpmA = 45B = 80C = 16D = 24
nout = rpm
3.Torsion of shaftsMedium
d1​ = 50 mmd2​ = 25 mmT = 250 N·mABC2.5 m0.8 m

A stepped solid aluminium shaft is fixed at A. Segment AB has diameter 50 mm and length 2.5 m; segment BC has diameter 25 mm and length 0.8 m. A torque of 250 N·m acts at the free end C. Find the maximum shear stress τmax in the shaft.

T = 250 N·md1 = 50 mm, L1 = 2.5 md2 = 25 mm, L2 = 0.8 m
τmax = MPa
4.Torsion of shaftsHard
do​ = ?5 kW, 1800 rpm

A hollow shaft must transmit 5 kW at 1800 rpm. Its inner diameter is to be 0.5 times its outer diameter, and the shear stress must not exceed 60 MPa. Find the smallest outer diameter do.

P = 5 kWN = 1800 rpmdi/do = 0.5τallow = 60 MPa
do = mm
5.Mohr’s circle & stress transformationMedium
σx​ = −80τxy​ = −60MPa

A point in a thin plate is in plane stress: σₓ = −80 MPa, σᵧ = 0 MPa and τₓᵧ = −60 MPa, with σz = 0. Find the absolute maximum shear stress τabs at the point (considering all planes in three dimensions).

σx = −80 MPaσy = 0 MPaτxy = −60 MPaσz = 0
τabs = MPa
6.Mohr’s circle & stress transformationHard
σx​ = −70σy​ = 20τxy​ = −10MPa

A point in a thin plate is in plane stress: σₓ = −70 MPa, σᵧ = 20 MPa and τₓᵧ = −10 MPa (σz = 0). The material has a yield strength of 350 MPa. Find the factor of safety n against yielding by the Tresca (maximum shear stress) criterion.

σx = −70 MPaσy = 20 MPaτxy = −10 MPaσY = 350 MPa
n =
7.Axial stress & strainMedium
P = ?12300 mm200 mmØ30Ø30δ = 0.2 mm

A bar is made of a steel segment (diameter 30 mm, length 300 mm, E = 200 GPa) joined end to end with a segment made of copper (diameter 30 mm, length 200 mm, E = 120 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.2 mm in total.

segment 1: steel, Ø30 mm, 300 mm, E = 200 GPasegment 2: copper, Ø30 mm, 200 mm, E = 120 GPaδ = 0.2 mm
P = kN
8.Axial stress & strainHard
Ø 30 mmBrass0.5 mØ 20 mmCopper1 mP = 25 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 25 kNsegment 1: Ø30 mm, 0.5 m, brass (E = 100 GPa)segment 2: Ø20 mm, 1 m, copper (E = 117 GPa)
δ = mm
9.Column bucklingMedium
PL = 4 m50 × 60 mmcross-section

A column of length L made of aluminium is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 4 mE = 70 GPa (aluminium)b × h = 50 × 60 mm
Pcr = kN
10.Column bucklingHard
P = 100 kNL = 4 md = ?cross-section

A solid round column of length L made of steel is fixed at both ends. It must carry 100 kN with a factor of safety of 2.5 against buckling. Find the smallest diameter d.

P = 100 kNn = 2.5L = 4 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
tx20 mm3 cycles3 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 20 mm is followed 3 cycles later by a peak of 3 mm. Find the damping ratio ζ.

x0 = 20 mmx3 = 3 mmn = 3
ζ =
12.Mechanical vibrationsHard
k1​ = 15k2​ = 40k3​ = 25m = 40 kg

A 40 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 15 kN/m and k₂ = 40 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 15 kN/mk2 = 40 kN/mk3 = 25 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: P = 1.131 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 3.77 m/s

Power

P = (600 − 300)·3.77 = 1131 W = 1.131 kW

Answer

P = 1.131 kW
2.Gears & gear trains

Answer: nout = 360 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 960·45/80 = 540 rpm = nC

Second stage

nout = 540·16/24 = 360 rpm

Answer

nout = 360 rpm

total ratio = 2.667 : 1

3.Torsion of shafts

Answer: τmax = 81.49 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Stress in each segment

T = 250 N·m = 250000 N·mm
τAB = 16·250000/(π·50³) = 10.19 MPa
τBC = 16·250000/(π·25³) = 81.49 MPa

Answer

τmax = 81.49 MPa
4.Torsion of shafts

Answer: do = 13.39 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1800/60 = 188.5 rad/s
T = P/ω = 5000/188.5 = 26.53 N·m

Outer diameter from the allowable stress

T = 26.53 N·m = 26526 N·mm
1 − k⁴ = 1 − 0.5⁴ = 0.9375
do = ∛(16T/(π·τallow·(1 − k⁴))) = ∛(16·26526/(π·60·0.9375)) = 13.39 mm
di = 0.5·13.39 = 6.696 mm

Answer

do = 13.39 mm

A solid shaft would need d = 13.11 mm; the hollow one is a little larger but much lighter.

5.Mohr’s circle & stress transformation

Answer: τabs = 72.11 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. In three dimensions the absolute maximum shear stress is (σmax − σmin)/2 over all three principal stresses; in plane stress the third one is zero.

στxyCσ1​σ2​

In-plane principal stresses

C = −40 MPa, R = √((−40)² + (−60)²) = 72.11 MPa
σ1 = 32.11 MPa, σ2 = −112.1 MPa, σz = 0

Largest of the three circles

τ = max(|σ1 − σ2|, |σ1|, |σ2|)/2 = max(144.2, 32.11, 112.1)/2 = 72.11 MPa

Answer

τabs = 72.11 MPa

Here σ₁ and σ₂ have opposite signs, so the in-plane maximum R is also the absolute maximum.

6.Mohr’s circle & stress transformation

Answer: n = 3.796

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Yield criteria: von Mises predicts yield when σvM = √(σ₁² − σ₁σ₂ + σ₂²) reaches σY; Tresca when the absolute maximum shear stress reaches σY/2.

στxyCσ1​σ2​

Principal stresses

C = −25 MPa, R = 46.1 MPa
σ1 = 21.1 MPa, σ2 = −71.1 MPa, σ3 = 0

Tresca

σmax − σmin = 92.2 MPa
n = 350/92.2 = 3.796

Answer

n = 3.796

n > 1 means the point does not yield; Tresca is slightly more conservative than von Mises.

7.Axial stress & strain

Answer: P = 44.64 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 706.9 mm², A₂ = 706.9 mm²

Flexibilities

L₁/(E₁A₁) = 300/(200000·706.9) = 2.122 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 200/(120000·706.9) = 2.358 × 10⁻⁶ mm/N

Load

P = 0.2/4.48 × 10⁻⁶ = 44644 N = 44.64 kN

Answer

P = 44.64 kN
8.Axial stress & strain

Answer: δ = 0.857 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·30²/4 = 706.9 mm², A2 = π·20²/4 = 314.2 mm²
σ1 = 35.37 MPa
σ2 = 79.58 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 35.37·500/100000 = 0.1768 mm
δ2 = σ2L2/E2 = 79.58·1000/117000 = 0.6801 mm
δ = δ1 + δ2 = 0.857 mm

Answer

δ = 0.857 mm
9.Column buckling

Answer: Pcr = 6.747 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 60·50³/12 = 625000 mm⁴

Effective length

KL = 2·4000 = 8000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·625000/8000² = 6747 N = 6.747 kN

Answer

Pcr = 6.747 kN
10.Column buckling

Answer: d = 56.68 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2.5·100000 = 250000 N
KL = 0.5·4000 = 2000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·250000·2000²/(π³·200000))^(1/4) = 56.68 mm

Answer

d = 56.68 mm

Check: the slenderness KL/r is 141.1, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.1001

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/3)·ln(20/3) = 0.6324

Damping ratio

ζ = δ/√(4π² + δ²) = 0.6324/√(39.48 + 0.3999) = 0.1001

Answer

ζ = 0.1001
12.Mechanical vibrations

Answer: fn = 3.299 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 15 + 40 = 55 kN/m
keq = 55·25/(55 + 25) = 17.19 kN/m

Natural frequency

ωn = √(17188/40) = 20.73 rad/s
fn = 20.73/(2π) = 3.299 Hz

Answer

fn = 3.299 Hz

ExamProblems · examproblems.com/courses/machine-design