Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
d1​ = 150 mmd2​ = 200 mm1440 rpmT1​ = 1000 NT2​ = 500 NP = ?

A belt runs on a 150 mm driving pulley at 1440 rpm. The tension is 1000 N on the tight side and 500 N on the slack side. Find the power P transmitted, in kW.

d1 = 150 mmn1 = 1440 rpmT1 = 1000 NT2 = 500 N
P = kW
2.Gears & gear trainsHard
Ns​ = 15nr​ = ?Np​ = 24carrier fixed

In a planetary gear set the sun gear has 15 teeth and each planet gear has 24 teeth. The planet carrier is held fixed and the sun is driven at 1800 rpm. Find the speed nr of the ring gear (magnitude).

Ns = 15Np = 24ns = 1800 rpm
nr = rpm
3.Torsion of shaftsMedium
T = 400 N·md = 50 mmL = 1 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 400 N·md = 50 mmL = 1 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
Tdo​ = 60 mm, di​ = 30 mm

A hollow shaft transmits 50 kW at 750 rpm. Find the maximum shear stress τmax in the shaft.

P = 50 kWN = 750 rpmdo = 60 mmdi = 30 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = 30σy​ = −80τxy​ = 60MPa

A point in a loaded part has σₓ = 30 MPa, σᵧ = −80 MPa and τₓᵧ = 60 MPa (tension positive). Find the angle θp from the x-axis to the direction of the largest principal stress, between −90° and 90°.

σx = 30 MPaσy = −80 MPaτxy = 60 MPa
θp = °
6.Mohr’s circle & stress transformationHard
σx​ = 100σy​ = 100τxy​ = 20MPa

A point in a loaded part has σₓ = 100 MPa, σᵧ = 100 MPa and τₓᵧ = 20 MPa (tension positive). Find the shear stress τθ on a plane whose normal is rotated 40° counter-clockwise from the x-axis (positive in the same sense as τₓᵧ).

σx = 100 MPaσy = 100 MPaτxy = 20 MPaθ = 40°
τθ = MPa
7.Axial stress & strainMedium
Ø 16 mmAluminium1.5 mP = 10 kN

Find the elongation δ of the aluminium bar under the axial load.

P = 10 kNd = 16 mmL = 1.5 mE = 70 GPa
δ = mm
8.Axial stress & strainHard
P = ?Ø20110 GPaØ80/60500 mm

A steel rod (diameter 20 mm, E = 200 GPa, allowable stress 200 MPa) sits inside a tube made of bronze (outer diameter 80 mm, inner diameter 60 mm, E = 110 GPa, allowable stress 70 MPa). They are compressed together between rigid plates. Find the largest load Pmax.

rod: Ø20 mm, E = 200 GPa, σallow = 200 MPatube: Ø80/Ø60 mm, E = 110 GPa, σallow = 70 MPa
Pmax = kN
9.Column bucklingMedium
PL = 6 md = 60 mmcross-section

A column of length L made of aluminium is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 6 mE = 70 GPa (aluminium)d = 60 mm
Pcr = kN
10.Column bucklingHard
PL = 2 md = 50 mmcross-section

A column of length L made of aluminium is fixed at the base and pinned at the top. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 2 mE = 70 GPa (aluminium)d = 50 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 50 kN/mζ = 0.3m = 50 kg

A 50 kg mass on a spring with a stiffness of 50 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.

m = 50 kgk = 50 kN/mζ = 0.3
fd = Hz
12.Mechanical vibrationsHard
k1​ = 40k2​ = 5k3​ = 10m = 25 kg

A 25 kg mass hangs from spring k₃ = 10 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 5 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 40 kN/mk2 = 5 kN/mk3 = 10 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: P = 5.655 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 11.31 m/s

Power

P = (1000 − 500)·11.31 = 5655 W = 5.655 kW

Answer

P = 5.655 kW
2.Gears & gear trains

Answer: nr = 428.6 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 15 + 2·24 = 63

Willis equation with the carrier fixed

With nc = 0 the sun drives the ring through the planets, which act as idlers.

nr = −ns·Ns/Nr = −1800·15/63 = −428.6 rpm
|nr| = 428.6 rpm

Answer

nr = 428.6 rpm

The ring turns opposite to the sun.

3.Torsion of shafts

Answer: φ = 0.4669 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·50⁴/32 = 613592 mm⁴

Angle of twist

φ = TL/(GJ) = 400·1000·1000/(80000·613592) = 0.008149 rad
φ = 0.008149·180/π = 0.4669°

Answer

φ = 0.4669°
4.Torsion of shafts

Answer: τmax = 16.01 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·750/60 = 78.54 rad/s
T = P/ω = 50000/78.54 = 636.6 N·m

Polar second moment of area

J = π(60⁴ − 30⁴)/32 = 1.193 × 10⁶ mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 636620·30/1.193 × 10⁶ = 16.01 MPa

Answer

τmax = 16.01 MPa
5.Mohr’s circle & stress transformation

Answer: θp = 23.74 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCσ1​σ2​

Angle on the circle

Point x sits at an angle 2θp from the σ-axis on Mohr’s circle; the quadrant follows from the signs of σₓ − σᵧ and τₓᵧ.

2θp = atan2(2·60, 30 − −80) = 47.49°

Angle on the element

θp = 23.74°

Answer

θp = 23.74°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: τθ = 3.473 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

τθ = −0·0.9848 + 20·0.1736 = 3.473 MPa

Answer

τθ = 3.473 MPa
7.Axial stress & strain

Answer: δ = 1.066 mm

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·16²/4 = 201.1 mm²
σ = P/A = 10·1000/201.1 = 49.74 MPa

Strain (Hooke’s law)

E for aluminium = 70 GPa = 70000 MPa.

ε = σ/E = 49.74/70000 = 0.0007105 = 710.5 µε

Elongation

δ = ε·L = 0.0007105·1500 mm = 1.066 mm

Answer

δ = 1.066 mm
8.Axial stress & strain

Answer: Pmax = 193.9 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·20²/4 = 314.2 mm²
At = π(80² − 60²)/4 = 2199 mm²

Combined axial stiffness

ΣEA = 200·10³·314.2 + 110·10³·2199 = 3.047 × 10⁸ N

Governing strain

ε = min(0.001, 0.0006364) = 0.0006364 (bronze)

Largest load

Pmax = 0.0006364·3.047 × 10⁸ = 193922 N = 193.9 kN

Answer

Pmax = 193.9 kN
9.Column buckling

Answer: Pcr = 3.052 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Effective length

KL = 2·6000 = 12000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·636173/12000² = 3052 N = 3.052 kN

Answer

Pcr = 3.052 kN
10.Column buckling

Answer: σcr = 55.08 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·50⁴/64 = 306796 mm⁴

Radius of gyration and slenderness

A = 1963 mm²
r = √(I/A) = √(306796/1963) = 12.5 mm
KL = 0.7·2000 = 1400 mm
KL/r = 1400/12.5 = 112

Critical stress

σcr = π²E/(KL/r)² = π²·70000/112² = 55.08 MPa

Answer

σcr = 55.08 MPa
11.Mechanical vibrations

Answer: fd = 4.801 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(50000/50) = 31.62 rad/s
fn = 31.62/(2π) = 5.033 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 5.033·√(1 − 0.3²) = 4.801 Hz

Answer

fd = 4.801 Hz
12.Mechanical vibrations

Answer: fn = 2.879 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 40 + 5 = 45 kN/m
keq = 45·10/(45 + 10) = 8.182 kN/m

Natural frequency

ωn = √(8182/25) = 18.09 rad/s
fn = 18.09/(2π) = 2.879 Hz

Answer

fn = 2.879 Hz

ExamProblems · examproblems.com/courses/machine-design