Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
d1​ = 100 mmd2​ = 500 mm720 rpmT1​ = 1500 NT2​ = 450 NP = ?

A belt runs on a 100 mm driving pulley at 720 rpm. The tension is 1500 N on the tight side and 450 N on the slack side. Find the power P transmitted, in kW.

d1 = 100 mmn1 = 720 rpmT1 = 1500 NT2 = 450 N
P = kW
2.Gears & gear trainsHard
A = 48B = 60C = 24D = 50

In a compound gear train, gear A (48 teeth) on the input shaft turning at 1500 rpm drives gear B (60 teeth). Gear C (24 teeth) is fixed to the same shaft as B and drives gear D (50 teeth) on the output shaft. Find the output speed nout.

nin = 1500 rpmA = 48B = 60C = 24D = 50
nout = rpm
3.Torsion of shaftsMedium
do​ = ?T = 100 N·m

A hollow shaft must carry a torque of 100 N·m. Its inner diameter is to be 0.5 times its outer diameter, and the shear stress must not exceed 75 MPa. Find the smallest outer diameter do.

T = 100 N·mdi/do = 0.5τallow = 75 MPa
do = mm
4.Torsion of shaftsHard
Tdo​ = 40 mm, di​ = 24 mm

A hollow shaft transmits 5 kW at 500 rpm. Find the maximum shear stress τmax in the shaft.

P = 5 kWN = 500 rpmdo = 40 mmdi = 24 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = −80σy​ = −50τxy​ = 10MPa

A point in a loaded part has σₓ = −80 MPa, σᵧ = −50 MPa and τₓᵧ = 10 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = −80 MPaσy = −50 MPaτxy = 10 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 140σy​ = −10τxy​ = 10MPa

A point in a loaded part has σₓ = 140 MPa, σᵧ = −10 MPa and τₓᵧ = 10 MPa (tension positive). Find the normal stress σθ on a plane whose normal is rotated 40° counter-clockwise from the x-axis.

σx = 140 MPaσy = −10 MPaτxy = 10 MPaθ = 40°
σθ = MPa
7.Axial stress & strainMedium
Ø 30 mmCopper1.5 mP = 65 kN

Find the axial strain ε in the copper bar, in microstrain (µε = 10⁻⁶).

P = 65 kNd = 30 mmL = 1.5 mE = 117 GPa
ε = µε
8.Axial stress & strainHard
P = ?Ø25100 GPaØ100/60800 mm

A steel rod (diameter 25 mm, E = 200 GPa, allowable stress 200 MPa) sits inside a tube made of brass (outer diameter 100 mm, inner diameter 60 mm, E = 100 GPa, allowable stress 60 MPa). They are compressed together between rigid plates. Find the largest load Pmax.

rod: Ø25 mm, E = 200 GPa, σallow = 200 MPatube: Ø100/Ø60 mm, E = 100 GPa, σallow = 60 MPa
Pmax = kN
9.Column bucklingMedium
PL = 2 m50 × 80 mmcross-section

A column of length L made of steel is pinned at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 2 mE = 200 GPa (steel)b × h = 50 × 80 mm
Pcr = kN
10.Column bucklingHard
P = 35 kNL = 4 md = ?cross-section

A solid round column of length L made of aluminium is pinned at both ends. It must carry 35 kN with a factor of safety of 2 against buckling. Find the smallest diameter d.

P = 35 kNn = 2L = 4 mE = 70 GPa (aluminium)
d = mm
11.Mechanical vibrationsMedium
k = 8 kN/mc = 130 N·s/mm = 80 kg

An 80 kg mass is supported by a spring with a stiffness of 8 kN/m and a viscous damper with a damping coefficient of 130 N·s/m. Find the damping ratio ζ.

m = 80 kgk = 8 kN/mc = 130 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 60k2​ = 5m = 40 kg

A 40 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 60 kN/m and k₂ = 5 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 40 kgk1 = 60 kN/mk2 = 5 kN/m
keq = kN/m

3Solutions

1.Gears & gear trains

Answer: P = 3.958 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 3.77 m/s

Power

P = (1500 − 450)·3.77 = 3958 W = 3.958 kW

Answer

P = 3.958 kW
2.Gears & gear trains

Answer: nout = 576 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1500·48/60 = 1200 rpm = nC

Second stage

nout = 1200·24/50 = 576 rpm

Answer

nout = 576 rpm

total ratio = 2.604 : 1

3.Torsion of shafts

Answer: do = 19.35 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Outer diameter from the allowable stress

T = 100 N·m = 100000 N·mm
1 − k⁴ = 1 − 0.5⁴ = 0.9375
do = ∛(16T/(π·τallow·(1 − k⁴))) = ∛(16·100000/(π·75·0.9375)) = 19.35 mm
di = 0.5·19.35 = 9.674 mm

Answer

do = 19.35 mm

A solid shaft would need d = 18.94 mm; the hollow one is a little larger but much lighter.

4.Torsion of shafts

Answer: τmax = 8.731 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·500/60 = 52.36 rad/s
T = P/ω = 5000/52.36 = 95.49 N·m

Polar second moment of area

J = π(40⁴ − 24⁴)/32 = 218755 mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 95493·20/218755 = 8.731 MPa

Answer

τmax = 8.731 MPa
5.Mohr’s circle & stress transformation

Answer: τmax = 18.03 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

σxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((−80 − −50)/2)² + 10²) = 18.03 MPa

Answer

τmax = 18.03 MPa
6.Mohr’s circle & stress transformation

Answer: σθ = 87.87 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

σθ = 65 + 75·0.1736 + 10·0.9848 = 87.87 MPa

Answer

σθ = 87.87 MPa
7.Axial stress & strain

Answer: ε = 786 µε

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·30²/4 = 706.9 mm²
σ = P/A = 65·1000/706.9 = 91.96 MPa

Strain (Hooke’s law)

E for copper = 117 GPa = 117000 MPa.

ε = σ/E = 91.96/117000 = 0.000786 = 786 µε

Answer

ε = 786 µε
8.Axial stress & strain

Answer: Pmax = 360.5 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·25²/4 = 490.9 mm²
At = π(100² − 60²)/4 = 5027 mm²

Combined axial stiffness

ΣEA = 200·10³·490.9 + 100·10³·5027 = 6.008 × 10⁸ N

Governing strain

ε = min(0.001, 0.0006) = 0.0006 (brass)

Largest load

Pmax = 0.0006·6.008 × 10⁸ = 360498 N = 360.5 kN

Answer

Pmax = 360.5 kN
9.Column buckling

Answer: Pcr = 411.2 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 80·50³/12 = 833333 mm⁴

Effective length

KL = 1·2000 = 2000 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·833333/2000² = 411234 N = 411.2 kN

Answer

Pcr = 411.2 kN
10.Column buckling

Answer: d = 75.81 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2·35000 = 70000 N
KL = 1·4000 = 4000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·70000·4000²/(π³·70000))^(1/4) = 75.81 mm

Answer

d = 75.81 mm

Check: the slenderness KL/r is 211.1, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.08125

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(8000·80) = 1600 N·s/m

Damping ratio

ζ = c/cc = 130/1600 = 0.08125

Answer

ζ = 0.08125

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: keq = 65 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 60 + 5 = 65 kN/m

Answer

keq = 65 kN/m

ExamProblems · examproblems.com/courses/machine-design