Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 20, m = 2 mm

A 7.5 kW motor running at 960 rpm drives a pinion with 20 teeth and a module of 2 mm. Find the tangential force Ft on the pinion teeth.

P = 7.5 kWn = 960 rpmN1 = 20m = 2 mm
Ft = N
2.Gears & gear trainsHard
A = 12B = 16C = 40D = 72

A 1.5 kW motor at 1440 rpm drives gear A (12 teeth), which meshes with gear B (16 teeth). Gear C (40 teeth) on the same shaft as B drives gear D (72 teeth) on the output shaft. Each gear mesh has an efficiency of 96%. Find the output torque Tout.

P = 1.5 kWnin = 1440 rpmA = 12B = 16C = 40D = 72ηmesh = 96%
Tout = N·m
3.Torsion of shaftsMedium
T = 250 N·md = 25 mmL = 1 mφ = ?

A solid aluminium shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 250 N·md = 25 mmL = 1 mG = 26 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 20 kW at 1800 rpm without the shear stress exceeding 75 MPa. Find the smallest diameter d that works.

P = 20 kWN = 1800 rpmτallow = 75 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 30σy​ = 80τxy​ = −20MPa

A point in a thin plate is in plane stress: σₓ = 30 MPa, σᵧ = 80 MPa and τₓᵧ = −20 MPa, with σz = 0. Find the absolute maximum shear stress τabs at the point (considering all planes in three dimensions).

σx = 30 MPaσy = 80 MPaτxy = −20 MPaσz = 0
τabs = MPa
6.Mohr’s circle & stress transformationHard
σx​τxy​surface of the shaft

A solid shaft of diameter 50 mm carries an axial compressive force of 150 kN together with a torque of 400 N·m. At the surface of the shaft, find the largest principal stress σ1.

d = 50 mmF = −150 kNT = 400 N·m
σ1 = MPa
7.Axial stress & strainMedium
80 kNØ25110 GPaØ100/50400 mmδ = ?

A steel rod (diameter 25 mm, E = 200 GPa) sits inside a tube made of bronze (outer diameter 100 mm, inner diameter 50 mm, E = 110 GPa). Both are 400 mm long and are compressed together between rigid plates by 80 kN. Find the shortening δ.

P = 80 kNrod: Ø25 mm, E = 200 GPatube: Ø100/Ø50 mm, E = 110 GPaL = 400 mm
δ = mm
8.Axial stress & strainHard
Ø 35 mmSteel0.5 mØ 12 mmCopper0.5 mP = 90 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the largest normal stress σmax in the bar.

P = 90 kNsegment 1: Ø35 mm, 0.5 m, steel (E = 200 GPa)segment 2: Ø12 mm, 0.5 m, copper (E = 117 GPa)
σmax = MPa
9.Column bucklingMedium
PL = 1.5 md = 40 mmcross-section

A column of length L made of steel is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 1.5 mE = 200 GPa (steel)d = 40 mm
Pcr = kN
10.Column bucklingHard
P = 150 kNL = 4 md = ?cross-section

A solid round column of length L made of steel is fixed at the base and pinned at the top. It must carry 150 kN with a factor of safety of 2.5 against buckling. Find the smallest diameter d.

P = 150 kNn = 2.5L = 4 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
k = 80 kN/mc = 5370 N·s/mm = 250 kg

A 250 kg mass is supported by a spring with a stiffness of 80 kN/m and a viscous damper with a damping coefficient of 5370 N·s/m. Find the damping ratio ζ.

m = 250 kgk = 80 kN/mc = 5370 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 30k2​ = 30m = 50 kg

A 50 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 30 kN/m and k₂ = 30 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 30 kN/mk2 = 30 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: Ft = 3730 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·960/60 = 100.5 rad/s
T = P/ω = 7500/100.5 = 74.6 N·m

Pitch diameter

d = m·N = 2·20 = 40 mm

Tangential force

Ft = 2T/d = 2·74.6/0.04 = 3730 N

Answer

Ft = 3730 N
2.Gears & gear trains

Answer: Tout = 22 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1440·(12/16)·(40/72) = 600 rpm
ωout = 2π·600/60 = 62.83 rad/s

Output power and torque

Pout = 1500·0.96² = 1382 W
Tout = Pout/ωout = 1382/62.83 = 22 N·m

Answer

Tout = 22 N·m
3.Torsion of shafts

Answer: φ = 14.37 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·25⁴/32 = 38350 mm⁴

Angle of twist

φ = TL/(GJ) = 250·1000·1000/(26000·38350) = 0.2507 rad
φ = 0.2507·180/π = 14.37°

Answer

φ = 14.37°
4.Torsion of shafts

Answer: d = 19.31 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1800/60 = 188.5 rad/s
T = P/ω = 20000/188.5 = 106.1 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·106103/(π·75)) = 19.31 mm

Answer

d = 19.31 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: τabs = 43.51 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. In three dimensions the absolute maximum shear stress is (σmax − σmin)/2 over all three principal stresses; in plane stress the third one is zero.

στxyCσ1​σ2​

In-plane principal stresses

C = 55 MPa, R = √((−25)² + (−20)²) = 32.02 MPa
σ1 = 87.02 MPa, σ2 = 22.98 MPa, σz = 0

Largest of the three circles

τ = max(|σ1 − σ2|, |σ1|, |σ2|)/2 = max(64.03, 87.02, 22.98)/2 = 43.51 MPa

Answer

τabs = 43.51 MPa

Here the out-of-plane circle governs: the absolute maximum is larger than the in-plane maximum R.

6.Mohr’s circle & stress transformation

Answer: σ1 = 3.332 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Stresses at the surface

σ = F/A = −150000/(π·50²/4) = −150000/1963 = −76.39 MPa
τ = 16T/(πd³) = 16·400000/(π·50³) = 16.3 MPa
στxyCσ1​σ2​

Mohr’s circle

C = σ/2 = −38.2 MPa
R = √((−38.2)² + 16.3²) = 41.53 MPa
σ1 = C + R = 3.332 MPa
σ2 = C − R = −79.73 MPa

Answer

σ1 = 3.332 MPa
7.Axial stress & strain

Answer: δ = 0.04289 mm

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·25²/4 = 490.9 mm²
At = π(100² − 50²)/4 = 5890 mm²

Combined axial stiffness

ΣEA = 200·10³·490.9 + 110·10³·5890 = 7.461 × 10⁸ N

Shortening

δ = 80000·400/7.461 × 10⁸ = 0.04289 mm

Answer

δ = 0.04289 mm
8.Axial stress & strain

Answer: σmax = 795.8 MPa

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·35²/4 = 962.1 mm², A2 = π·12²/4 = 113.1 mm²
σ1 = 93.54 MPa
σ2 = 795.8 MPa

Largest stress

The thinner segment has the smaller area, so it carries the larger stress.

σmax = 795.8 MPa

Answer

σmax = 795.8 MPa
9.Column buckling

Answer: Pcr = 225 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·40⁴/64 = 125664 mm⁴

Effective length

KL = 0.7·1500 = 1050 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·125664/1050² = 224989 N = 225 kN

Answer

Pcr = 225 kN
10.Column buckling

Answer: d = 74.22 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2.5·150000 = 375000 N
KL = 0.7·4000 = 2800 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·375000·2800²/(π³·200000))^(1/4) = 74.22 mm

Answer

d = 74.22 mm

Check: the slenderness KL/r is 150.9, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.6004

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(80000·250) = 8944 N·s/m

Damping ratio

ζ = c/cc = 5370/8944 = 0.6004

Answer

ζ = 0.6004

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: fn = 5.513 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 30 + 30 = 60 kN/m

Natural frequency

ωn = √(60000/50) = 34.64 rad/s
fn = 34.64/(2π) = 5.513 Hz

Answer

fn = 5.513 Hz

ExamProblems · examproblems.com/courses/machine-design