Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 32N2​ = 60

A 4 kW motor running at 1450 rpm drives a pinion with 32 teeth, which meshes with a gear with 60 teeth. The gear pair has an efficiency of 95%. Find the torque T1 on the motor shaft.

P = 4 kWn1 = 1450 rpmN1 = 32N2 = 60η = 95%
T1 = N·m
2.Gears & gear trainsHard
d1​ = 100 mmd2​ = 450 mm1450 rpmC = 1200 mmθ = ?

An open belt connects a 100 mm pulley and a 450 mm pulley whose centres are 1200 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 100 mmd2 = 450 mmC = 1200 mm
θ = °
3.Torsion of shaftsMedium
d = ?T = 1000 N·mL = 1.5 m

A solid brass shaft 1.5 m long carries a torque of 1000 N·m. The angle of twist between its ends must not exceed 1°. Find the smallest diameter d that meets this limit.

T = 1000 N·mL = 1.5 mG = 39 GPaφallow = 1°
d = mm
4.Torsion of shaftsHard
d = 60 mmT0​ = 200 N·mACBa = 0.8 mb = 0.5 m

A solid brass shaft of diameter 60 mm is fixed to rigid walls at both ends A and B. A torque of 200 N·m is applied at C, 0.8 m from A and 0.5 m from B. Find the reaction torque TA at wall A.

d = 60 mmT0 = 200 N·ma = 0.8 mb = 0.5 m
TA = N·m
5.Mohr’s circle & stress transformationMedium
σx​ = −20σy​ = −60τxy​ = −40MPa

A point in a loaded part has σₓ = −20 MPa, σᵧ = −60 MPa and τₓᵧ = −40 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = −20 MPaσy = −60 MPaτxy = −40 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​ = −50σy​ = 30τxy​ = 40MPa

A point in a thin plate is in plane stress: σₓ = −50 MPa, σᵧ = 30 MPa and τₓᵧ = 40 MPa (σz = 0). The material has a yield strength of 420 MPa. Find the factor of safety n against yielding by the von Mises (distortion energy) criterion.

σx = −50 MPaσy = 30 MPaτxy = 40 MPaσY = 420 MPa
n =
7.Axial stress & strainMedium
P = ?12500 mm400 mmØ25Ø30δ = 0.2 mm

A bar is made of a steel segment (diameter 25 mm, length 500 mm, E = 200 GPa) joined end to end with a segment made of aluminium (diameter 30 mm, length 400 mm, E = 70 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.2 mm in total.

segment 1: steel, Ø25 mm, 500 mm, E = 200 GPasegment 2: aluminium, Ø30 mm, 400 mm, E = 70 GPaδ = 0.2 mm
P = kN
8.Axial stress & strainHard
P = ?Ø20110 GPaØ120/70400 mm

A steel rod (diameter 20 mm, E = 200 GPa, allowable stress 200 MPa) sits inside a tube made of bronze (outer diameter 120 mm, inner diameter 70 mm, E = 110 GPa, allowable stress 60 MPa). They are compressed together between rigid plates. Find the largest load Pmax.

rod: Ø20 mm, E = 200 GPa, σallow = 200 MPatube: Ø120/Ø70 mm, E = 110 GPa, σallow = 60 MPa
Pmax = kN
9.Column bucklingMedium
PL = 3 md = 80 mmcross-section

A column of length L made of aluminium is pinned at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 3 mE = 70 GPa (aluminium)d = 80 mm
Pcr = kN
10.Column bucklingHard
P = 25 kNL = 2.5 md = ?cross-section

A solid round column of length L made of steel is fixed at the base and pinned at the top. It must carry 25 kN with a factor of safety of 3 against buckling. Find the smallest diameter d.

P = 25 kNn = 3L = 2.5 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
tx25 mm1 cycle11.7 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 25 mm is followed one cycle later by a peak of 11.7 mm. Find the damping ratio ζ.

x0 = 25 mmx1 = 11.7 mmn = 1
ζ =
12.Mechanical vibrationsHard
k1​ = 30k2​ = 10m = 40 kg

A 40 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 30 kN/m and k₂ = 10 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 40 kgk1 = 30 kN/mk2 = 10 kN/m
keq = kN/m

3Solutions

1.Gears & gear trains

Answer: T1 = 26.34 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 4000/151.8 = 26.34 N·m

Answer

T1 = 26.34 N·m
2.Gears & gear trains

Answer: θ = 163.2 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.1458) = 8.386°

Angle of wrap

θ = 180 − 2·8.386 = 163.2°

Answer

θ = 163.2°
3.Torsion of shafts

Answer: d = 68.83 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Required polar moment

T = 1000 N·m = 1 × 10⁶ N·mm
L = 1.5 m = 1500 mm
G = 39 GPa = 39000 MPa
φ = 1·π/180 = 0.01745 rad
J = TL/(Gφ) = 1 × 10⁶·1500/(39000·0.01745) = 2.204 × 10⁶ mm⁴

Diameter

d = (32J/π)1/4 = 68.83 mm

Answer

d = 68.83 mm

In practice you would round up to the next standard size.

4.Torsion of shafts

Answer: TA = 76.92 N·m

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω. When both ends are fixed, statics alone gives only TA + TB = T₀; the second equation is compatibility (equal twist of both parts at the loaded section).

Equilibrium and compatibility

TA + TB = 200
TA·a = TB·b
TA = 200·0.5/1.3 = 76.92 N·m
TB = 200·0.8/1.3 = 123.1 N·m

Answer

TA = 76.92 N·m
5.Mohr’s circle & stress transformation

Answer: τmax = 44.72 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((−20 − −60)/2)² + −40²) = 44.72 MPa

Answer

τmax = 44.72 MPa
6.Mohr’s circle & stress transformation

Answer: n = 4.264

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Yield criteria: von Mises predicts yield when σvM = √(σ₁² − σ₁σ₂ + σ₂²) reaches σY; Tresca when the absolute maximum shear stress reaches σY/2.

στxyCσ1​σ2​

Principal stresses

C = −10 MPa, R = 56.57 MPa
σ1 = 46.57 MPa, σ2 = −66.57 MPa, σ3 = 0

Von Mises

σvM = √(46.57² − 46.57·(−66.57) + (−66.57)²) = 98.49 MPa
n = 420/98.49 = 4.264

Answer

n = 4.264

n > 1 means the point does not yield; Tresca is slightly more conservative than von Mises.

7.Axial stress & strain

Answer: P = 15.18 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 490.9 mm², A₂ = 706.9 mm²

Flexibilities

L₁/(E₁A₁) = 500/(200000·490.9) = 5.093 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 400/(70000·706.9) = 8.084 × 10⁻⁶ mm/N

Load

P = 0.2/1.318 × 10⁻⁵ = 15178 N = 15.18 kN

Answer

P = 15.18 kN
8.Axial stress & strain

Answer: Pmax = 481.9 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·20²/4 = 314.2 mm²
At = π(120² − 70²)/4 = 7461 mm²

Combined axial stiffness

ΣEA = 200·10³·314.2 + 110·10³·7461 = 8.836 × 10⁸ N

Governing strain

ε = min(0.001, 0.0005455) = 0.0005455 (bronze)

Largest load

Pmax = 0.0005455·8.836 × 10⁸ = 481949 N = 481.9 kN

Answer

Pmax = 481.9 kN
9.Column buckling

Answer: Pcr = 154.3 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·80⁴/64 = 2.011 × 10⁶ mm⁴

Effective length

KL = 1·3000 = 3000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·2.011 × 10⁶/3000² = 154342 N = 154.3 kN

Answer

Pcr = 154.3 kN
10.Column buckling

Answer: d = 39.24 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 3·25000 = 75000 N
KL = 0.7·2500 = 1750 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·75000·1750²/(π³·200000))^(1/4) = 39.24 mm

Answer

d = 39.24 mm

Check: the slenderness KL/r is 178.4, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.12

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(25/11.7) = 0.7593

Damping ratio

ζ = δ/√(4π² + δ²) = 0.7593/√(39.48 + 0.5765) = 0.12

Answer

ζ = 0.12
12.Mechanical vibrations

Answer: keq = 40 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 30 + 10 = 40 kN/m

Answer

keq = 40 kN/m

ExamProblems · examproblems.com/courses/machine-design