Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 16N2​ = 25

A 5.5 kW motor running at 1450 rpm drives a pinion with 16 teeth, which meshes with a gear with 25 teeth. The gear pair has an efficiency of 97%. Find the output torque T2 on the gear shaft.

P = 5.5 kWn1 = 1450 rpmN1 = 16N2 = 25η = 97%
T2 = N·m
2.Gears & gear trainsHard
A = 24B = 80C = 40D = 80

In a compound gear train, gear A (24 teeth) on the input shaft turning at 1500 rpm drives gear B (80 teeth). Gear C (40 teeth) is fixed to the same shaft as B and drives gear D (80 teeth) on the output shaft. Find the output speed nout.

nin = 1500 rpmA = 24B = 80C = 40D = 80
nout = rpm
3.Torsion of shaftsMedium
T = 1000 N·md = 40 mmL = 1 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 1000 N·md = 40 mmL = 1 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
Tdo​ = 100 mm, di​ = 70 mm

A hollow shaft transmits 50 kW at 750 rpm. Find the maximum shear stress τmax in the shaft.

P = 50 kWN = 750 rpmdo = 100 mmdi = 70 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = 90τxy​ = 30MPa

A point has σₓ = 90 MPa, σᵧ = 0 MPa and τₓᵧ = 30 MPa (tension positive). Find the angle θs, between −90° and 90°, from the x-axis to the normal of the plane on which the shear stress has its maximum positive value +R (shear positive in the same sense as τₓᵧ).

σx = 90 MPaσy = 0 MPaτxy = 30 MPa
θs = °
6.Mohr’s circle & stress transformationHard
σx​ = 110σy​ = 60τxy​ = −50MPa

A point in a loaded part has σₓ = 110 MPa, σᵧ = 60 MPa and τₓᵧ = −50 MPa (tension positive). Find the normal stress σθ on a plane whose normal is rotated 25° counter-clockwise from the x-axis.

σx = 110 MPaσy = 60 MPaτxy = −50 MPaθ = 25°
σθ = MPa
7.Axial stress & strainMedium
50 kNØ40100 GPaØ120/60400 mmδ = ?

A steel rod (diameter 40 mm, E = 200 GPa) sits inside a tube made of brass (outer diameter 120 mm, inner diameter 60 mm, E = 100 GPa). Both are 400 mm long and are compressed together between rigid plates by 50 kN. Find the shortening δ.

P = 50 kNrod: Ø40 mm, E = 200 GPatube: Ø120/Ø60 mm, E = 100 GPaL = 400 mm
δ = mm
8.Axial stress & strainHard
Ø 30 mmBrass1 mØ 12 mmAluminium1.5 mP = 15 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the largest normal stress σmax in the bar.

P = 15 kNsegment 1: Ø30 mm, 1 m, brass (E = 100 GPa)segment 2: Ø12 mm, 1.5 m, aluminium (E = 70 GPa)
σmax = MPa
9.Column bucklingMedium
PL = 2.5 md = 80 mmcross-section

A column of length L made of aluminium is pinned at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 2.5 mE = 70 GPa (aluminium)d = 80 mm
Pcr = kN
10.Column bucklingHard
P = 145 kNL = 2.5 md = ?cross-section

A solid round column of length L made of steel is fixed at both ends. It must carry 145 kN with a factor of safety of 2 against buckling. Find the smallest diameter d.

P = 145 kNn = 2L = 2.5 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
tx10 mm1 cycle6.9 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 10 mm is followed one cycle later by a peak of 6.9 mm. Find the damping ratio ζ.

x0 = 10 mmx1 = 6.9 mmn = 1
ζ =
12.Mechanical vibrationsHard
k1​ = 5k2​ = 80m = 25 kg

A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 5 kN/m and k₂ = 80 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 25 kgk1 = 5 kN/mk2 = 80 kN/m
keq = kN/m

3Solutions

1.Gears & gear trains

Answer: T2 = 54.9 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 5500/151.8 = 36.22 N·m

Output torque

T2 = 36.22·25/16·0.97 = 54.9 N·m

Answer

T2 = 54.9 N·m
2.Gears & gear trains

Answer: nout = 225 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1500·24/80 = 450 rpm = nC

Second stage

nout = 450·40/80 = 225 rpm

Answer

nout = 225 rpm

total ratio = 6.667 : 1

3.Torsion of shafts

Answer: φ = 2.85 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·40⁴/32 = 251327 mm⁴

Angle of twist

φ = TL/(GJ) = 1000·1000·1000/(80000·251327) = 0.04974 rad
φ = 0.04974·180/π = 2.85°

Answer

φ = 2.85°
4.Torsion of shafts

Answer: τmax = 4.267 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·750/60 = 78.54 rad/s
T = P/ω = 50000/78.54 = 636.6 N·m

Polar second moment of area

J = π(100⁴ − 70⁴)/32 = 7.46 × 10⁶ mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 636620·50/7.46 × 10⁶ = 4.267 MPa

Answer

τmax = 4.267 MPa
5.Mohr’s circle & stress transformation

Answer: θs = −28.15 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Angle on the circle

On Mohr’s circle the top point (+R) is 90° from the principal point σ₁; on the element that is 45°.

cos 2θs = 30/54.08 = 0.5547, sin 2θs = −45/54.08 = −0.8321
2θs = atan2(−45, 30) = −56.31°

Angle on the element

θs = −28.15°
check: θs − θp = −28.15 − 16.85 = −45°

Answer

θs = −28.15°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: σθ = 62.77 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

σθ = 85 + 25·0.6428 + −50·0.766 = 62.77 MPa

Answer

σθ = 62.77 MPa
7.Axial stress & strain

Answer: δ = 0.01819 mm

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·40²/4 = 1257 mm²
At = π(120² − 60²)/4 = 8482 mm²

Combined axial stiffness

ΣEA = 200·10³·1257 + 100·10³·8482 = 1.1 × 10⁹ N

Shortening

δ = 50000·400/1.1 × 10⁹ = 0.01819 mm

Answer

δ = 0.01819 mm
8.Axial stress & strain

Answer: σmax = 132.6 MPa

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·30²/4 = 706.9 mm², A2 = π·12²/4 = 113.1 mm²
σ1 = 21.22 MPa
σ2 = 132.6 MPa

Largest stress

The thinner segment has the smaller area, so it carries the larger stress.

σmax = 132.6 MPa

Answer

σmax = 132.6 MPa
9.Column buckling

Answer: Pcr = 222.3 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·80⁴/64 = 2.011 × 10⁶ mm⁴

Effective length

KL = 1·2500 = 2500 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·2.011 × 10⁶/2500² = 222253 N = 222.3 kN

Answer

Pcr = 222.3 kN
10.Column buckling

Answer: d = 46.5 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2·145000 = 290000 N
KL = 0.5·2500 = 1250 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·290000·1250²/(π³·200000))^(1/4) = 46.5 mm

Answer

d = 46.5 mm

Check: the slenderness KL/r is 107.5, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.05895

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(10/6.9) = 0.3711

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3711/√(39.48 + 0.1377) = 0.05895

Answer

ζ = 0.05895
12.Mechanical vibrations

Answer: keq = 85 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 5 + 80 = 85 kN/m

Answer

keq = 85 kN/m

ExamProblems · examproblems.com/courses/machine-design