Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
d1​ = 80 mmd2​ = 200 mm960 rpmn2​ = ?

An 80 mm pulley at 960 rpm drives a 200 mm pulley by a belt with 2.5 % slip. Find the speed n2 of the driven pulley.

n1 = 960 rpmd1 = 80 mmd2 = 200 mms = 2.5 %
n2 = rpm
2.Gears & gear trainsHard
A = 24B = 25C = 15D = 40

A 3 kW motor at 1440 rpm drives gear A (24 teeth), which meshes with gear B (25 teeth). Gear C (15 teeth) on the same shaft as B drives gear D (40 teeth) on the output shaft. Each gear mesh has an efficiency of 96%. Find the output torque Tout.

P = 3 kWnin = 1440 rpmA = 24B = 25C = 15D = 40ηmesh = 96%
Tout = N·m
3.Torsion of shaftsMedium
do​ = ?T = 1000 N·m

A hollow shaft must carry a torque of 1000 N·m. Its inner diameter is to be 0.75 times its outer diameter, and the shear stress must not exceed 50 MPa. Find the smallest outer diameter do.

T = 1000 N·mdi/do = 0.75τallow = 50 MPa
do = mm
4.Torsion of shaftsHard
Tdo​ = 40 mm, di​ = 24 mm

A hollow shaft transmits 20 kW at 750 rpm. Find the maximum shear stress τmax in the shaft.

P = 20 kWN = 750 rpmdo = 40 mmdi = 24 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = −70σy​ = 70τxy​ = 20MPa

A point in a loaded part has σₓ = −70 MPa, σᵧ = 70 MPa and τₓᵧ = 20 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = −70 MPaσy = 70 MPaτxy = 20 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​τxy​top surface of the shaft

A solid shaft of diameter 60 mm carries a bending moment of 1500 N·m together with a torque of 500 N·m. At the top surface, where the bending stress is tensile and largest, find the maximum in-plane shear stress τmax.

d = 60 mmM = 1500 N·mT = 500 N·m
τmax = MPa
7.Axial stress & strainMedium
P = ?12400 mm300 mmØ20Ø50δ = 0.5 mm

A bar is made of a steel segment (diameter 20 mm, length 400 mm, E = 200 GPa) joined end to end with a segment made of copper (diameter 50 mm, length 300 mm, E = 120 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.5 mm in total.

segment 1: steel, Ø20 mm, 400 mm, E = 200 GPasegment 2: copper, Ø50 mm, 300 mm, E = 120 GPaδ = 0.5 mm
P = kN
8.Axial stress & strainHard
Ø 25 mmBrass2 mØ 16 mmSteel1.5 mP = 35 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 35 kNsegment 1: Ø25 mm, 2 m, brass (E = 100 GPa)segment 2: Ø16 mm, 1.5 m, steel (E = 200 GPa)
δ = mm
9.Column bucklingMedium
PL = 3 m20 × 60 mmcross-section

A column of length L made of aluminium is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 3 mE = 70 GPa (aluminium)b × h = 20 × 60 mm
Pcr = kN
10.Column bucklingHard
P = 10 kNL = 5 md = ?cross-section

A solid round column of length L made of aluminium is pinned at both ends. It must carry 10 kN with a factor of safety of 2.5 against buckling. Find the smallest diameter d.

P = 10 kNn = 2.5L = 5 mE = 70 GPa (aluminium)
d = mm
11.Mechanical vibrationsMedium
k = 4 kN/mζ = 0.3m = 20 kg

A 20 kg mass on a spring with a stiffness of 4 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.

m = 20 kgk = 4 kN/mζ = 0.3
fd = Hz
12.Mechanical vibrationsHard
k1​ = 30k2​ = 50m = 25 kg

A 25 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 50 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 30 kN/mk2 = 50 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: n2 = 374.4 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

960·80/200 = 384 rpm

With slip

n2 = 384·0.975 = 374.4 rpm

Answer

n2 = 374.4 rpm
2.Gears & gear trains

Answer: Tout = 50.93 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1440·(24/25)·(15/40) = 518.4 rpm
ωout = 2π·518.4/60 = 54.29 rad/s

Output power and torque

Pout = 3000·0.96² = 2765 W
Tout = Pout/ωout = 2765/54.29 = 50.93 N·m

Answer

Tout = 50.93 N·m
3.Torsion of shafts

Answer: do = 53.02 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Outer diameter from the allowable stress

T = 1000 N·m = 1 × 10⁶ N·mm
1 − k⁴ = 1 − 0.75⁴ = 0.6836
do = ∛(16T/(π·τallow·(1 − k⁴))) = ∛(16·1 × 10⁶/(π·50·0.6836)) = 53.02 mm
di = 0.75·53.02 = 39.76 mm

Answer

do = 53.02 mm

A solid shaft would need d = 46.7 mm; the hollow one is a little larger but much lighter.

4.Torsion of shafts

Answer: τmax = 23.28 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·750/60 = 78.54 rad/s
T = P/ω = 20000/78.54 = 254.6 N·m

Polar second moment of area

J = π(40⁴ − 24⁴)/32 = 218755 mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 254648·20/218755 = 23.28 MPa

Answer

τmax = 23.28 MPa
5.Mohr’s circle & stress transformation

Answer: τmax = 72.8 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((−70 − 70)/2)² + 20²) = 72.8 MPa

Answer

τmax = 72.8 MPa
6.Mohr’s circle & stress transformation

Answer: τmax = 37.28 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Stresses at the surface

σ = 32M/(πd³) = 32·1500000/(π·60³) = 70.74 MPa
τ = 16T/(πd³) = 16·500000/(π·60³) = 11.79 MPa
στxyCτmax​

Mohr’s circle

C = σ/2 = 35.37 MPa
R = √(35.37² + 11.79²) = 37.28 MPa

Answer

τmax = 37.28 MPa
7.Axial stress & strain

Answer: P = 65.45 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 314.2 mm², A₂ = 1963 mm²

Flexibilities

L₁/(E₁A₁) = 400/(200000·314.2) = 6.366 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 300/(120000·1963) = 1.273 × 10⁻⁶ mm/N

Load

P = 0.5/7.639 × 10⁻⁶ = 65450 N = 65.45 kN

Answer

P = 65.45 kN
8.Axial stress & strain

Answer: δ = 2.732 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·25²/4 = 490.9 mm², A2 = π·16²/4 = 201.1 mm²
σ1 = 71.3 MPa
σ2 = 174.1 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 71.3·2000/100000 = 1.426 mm
δ2 = σ2L2/E2 = 174.1·1500/200000 = 1.306 mm
δ = δ1 + δ2 = 2.732 mm

Answer

δ = 2.732 mm
9.Column buckling

Answer: Pcr = 6.266 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 60·20³/12 = 40000 mm⁴

Effective length

KL = 0.7·3000 = 2100 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·40000/2100² = 6266 N = 6.266 kN

Answer

Pcr = 6.266 kN
10.Column buckling

Answer: d = 65.52 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2.5·10000 = 25000 N
KL = 1·5000 = 5000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·25000·5000²/(π³·70000))^(1/4) = 65.52 mm

Answer

d = 65.52 mm

Check: the slenderness KL/r is 305.2, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: fd = 2.147 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(4000/20) = 14.14 rad/s
fn = 14.14/(2π) = 2.251 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 2.251·√(1 − 0.3²) = 2.147 Hz

Answer

fd = 2.147 Hz
12.Mechanical vibrations

Answer: fn = 4.359 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/30 + 1/50 → keq = 30·50/(30 + 50) = 18.75 kN/m

Natural frequency

ωn = √(18750/25) = 27.39 rad/s
fn = 27.39/(2π) = 4.359 Hz

Answer

fn = 4.359 Hz

ExamProblems · examproblems.com/courses/machine-design