Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 300 mm apart. They must be connected by a pair of spur gears with a module of 4 mm and a speed reduction of 4 : 1. How many teeth N2 must the gear have?

a = 300 mmm = 4 mmi = 4
N2 =
2.Gears & gear trainsHard
A = 32B = 72C = 30D = 40

In a compound gear train, gear A (32 teeth) on the input shaft turning at 2900 rpm drives gear B (72 teeth). Gear C (30 teeth) is fixed to the same shaft as B and drives gear D (40 teeth) on the output shaft. Find the output speed nout.

nin = 2900 rpmA = 32B = 72C = 30D = 40
nout = rpm
3.Torsion of shaftsMedium
T = 100 N·md = 25 mmL = 2.5 mφ = ?

A solid aluminium shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 100 N·md = 25 mmL = 2.5 mG = 26 GPa
φ = °
4.Torsion of shaftsHard
Tdo​ = 75 mm, di​ = 56 mm

A hollow shaft transmits 50 kW at 750 rpm. Find the maximum shear stress τmax in the shaft.

P = 50 kWN = 750 rpmdo = 75 mmdi = 56 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = −40σy​ = −20τxy​ = −60MPa

A point in a loaded part has σₓ = −40 MPa, σᵧ = −20 MPa and τₓᵧ = −60 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = −40 MPaσy = −20 MPaτxy = −60 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​τxy​top surface of the shaft

A solid shaft of diameter 40 mm carries a bending moment of 750 N·m together with a torque of 250 N·m. At the top surface, where the bending stress is tensile and largest, find the largest principal stress σ1.

d = 40 mmM = 750 N·mT = 250 N·m
σ1 = MPa
7.Axial stress & strainMedium
Ø 12 mmBrass1.5 mP = 40 kN

Find the elongation δ of the brass bar under the axial load.

P = 40 kNd = 12 mmL = 1.5 mE = 100 GPa
δ = mm
8.Axial stress & strainHard
Ø 25 mmSteel1 mØ 12 mmSteel1.5 mP = 60 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 60 kNsegment 1: Ø25 mm, 1 m, steel (E = 200 GPa)segment 2: Ø12 mm, 1.5 m, steel (E = 200 GPa)
δ = mm
9.Column bucklingMedium
PL = 6 md = 60 mmcross-section

A column of length L made of aluminium is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 6 mE = 70 GPa (aluminium)d = 60 mm
Pcr = kN
10.Column bucklingHard
P = 25 kNL = 4 md = ?cross-section

A solid round column of length L made of steel is pinned at both ends. It must carry 25 kN with a factor of safety of 2.5 against buckling. Find the smallest diameter d.

P = 25 kNn = 2.5L = 4 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
k = 12 kN/mζ = 0.35m = 10 kg

A 10 kg mass on a spring with a stiffness of 12 kN/m has a viscous damper giving a damping ratio of 0.35. Find the damped natural frequency fd of its free vibration in Hz.

m = 10 kgk = 12 kN/mζ = 0.35
fd = Hz
12.Mechanical vibrationsHard
k1​ = 60k2​ = 25m = 25 kg

A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 60 kN/m and k₂ = 25 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 25 kgk1 = 60 kN/mk2 = 25 kN/m
keq = kN/m

3Solutions

1.Gears & gear trains

Answer: N2 = 120

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·300/4 = 150

Split by the ratio

N1 = 150/(1 + 4) = 30
N2 = 4·30 = 120

Answer

N2 = 120
2.Gears & gear trains

Answer: nout = 966.7 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 2900·32/72 = 1289 rpm = nC

Second stage

nout = 1289·30/40 = 966.7 rpm

Answer

nout = 966.7 rpm

total ratio = 3 : 1

3.Torsion of shafts

Answer: φ = 14.37 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·25⁴/32 = 38350 mm⁴

Angle of twist

φ = TL/(GJ) = 100·1000·2500/(26000·38350) = 0.2507 rad
φ = 0.2507·180/π = 14.37°

Answer

φ = 14.37°
4.Torsion of shafts

Answer: τmax = 11.15 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·750/60 = 78.54 rad/s
T = P/ω = 50000/78.54 = 636.6 N·m

Polar second moment of area

J = π(75⁴ − 56⁴)/32 = 2.141 × 10⁶ mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 636620·37.5/2.141 × 10⁶ = 11.15 MPa

Answer

τmax = 11.15 MPa
5.Mohr’s circle & stress transformation

Answer: τmax = 60.83 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((−40 − −20)/2)² + −60²) = 60.83 MPa

Answer

τmax = 60.83 MPa
6.Mohr’s circle & stress transformation

Answer: σ1 = 122.6 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Stresses at the surface

σ = 32M/(πd³) = 32·750000/(π·40³) = 119.4 MPa
τ = 16T/(πd³) = 16·250000/(π·40³) = 19.89 MPa
στxyCσ1​σ2​

Mohr’s circle

C = σ/2 = 59.68 MPa
R = √(59.68² + 19.89²) = 62.91 MPa
σ1 = C + R = 122.6 MPa
σ2 = C − R = −3.228 MPa

Answer

σ1 = 122.6 MPa
7.Axial stress & strain

Answer: δ = 5.305 mm

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·12²/4 = 113.1 mm²
σ = P/A = 40·1000/113.1 = 353.7 MPa

Strain (Hooke’s law)

E for brass = 100 GPa = 100000 MPa.

ε = σ/E = 353.7/100000 = 0.003537 = 3537 µε

Elongation

δ = ε·L = 0.003537·1500 mm = 5.305 mm

Answer

δ = 5.305 mm
8.Axial stress & strain

Answer: δ = 4.59 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·25²/4 = 490.9 mm², A2 = π·12²/4 = 113.1 mm²
σ1 = 122.2 MPa
σ2 = 530.5 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 122.2·1000/200000 = 0.6112 mm
δ2 = σ2L2/E2 = 530.5·1500/200000 = 3.979 mm
δ = δ1 + δ2 = 4.59 mm

Answer

δ = 4.59 mm
9.Column buckling

Answer: Pcr = 3.052 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Effective length

KL = 2·6000 = 12000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·636173/12000² = 3052 N = 3.052 kN

Answer

Pcr = 3.052 kN
10.Column buckling

Answer: d = 56.68 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2.5·25000 = 62500 N
KL = 1·4000 = 4000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·62500·4000²/(π³·200000))^(1/4) = 56.68 mm

Answer

d = 56.68 mm

Check: the slenderness KL/r is 282.3, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: fd = 5.165 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(12000/10) = 34.64 rad/s
fn = 34.64/(2π) = 5.513 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 5.513·√(1 − 0.35²) = 5.165 Hz

Answer

fd = 5.165 Hz
12.Mechanical vibrations

Answer: keq = 85 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 60 + 25 = 85 kN/m

Answer

keq = 85 kN/m

ExamProblems · examproblems.com/courses/machine-design