Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
d1​ = 200 mmd2​ = 300 mm720 rpmn2​ = ?

A 200 mm pulley at 720 rpm drives a 300 mm pulley by a belt with 1 % slip. Find the speed n2 of the driven pulley.

n1 = 720 rpmd1 = 200 mmd2 = 300 mms = 1 %
n2 = rpm
2.Gears & gear trainsHard
A = 16B = 32C = 12D = 20

A 2.2 kW motor at 1450 rpm drives gear A (16 teeth), which meshes with gear B (32 teeth). Gear C (12 teeth) on the same shaft as B drives gear D (20 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.

P = 2.2 kWnin = 1450 rpmA = 16B = 32C = 12D = 20ηmesh = 97%
Tout = N·m
3.Torsion of shaftsMedium
T = 250 N·md = 25 mmL = 1 mφ = ?

A solid brass shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 250 N·md = 25 mmL = 1 mG = 39 GPa
φ = °
4.Torsion of shaftsHard
d = ?50 kW, 750 rpm

A solid brass shaft transmits 50 kW at 750 rpm. The shear stress must not exceed 60 MPa and the twist must not exceed 0.25° per m of length. Find the smallest diameter d that satisfies both limits.

P = 50 kWN = 750 rpmτallow = 60 MPaθallow = 0.25°/mG = 39 GPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 10σy​ = −50τxy​ = 20MPa

A point has σₓ = 10 MPa, σᵧ = −50 MPa and τₓᵧ = 20 MPa (tension positive). The element is rotated 35° counter-clockwise. Find the normal stress σy′ on the faces of the rotated element that are perpendicular to the rotated y′-axis.

σx = 10 MPaσy = −50 MPaτxy = 20 MPaθ = 35°
σy′ = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 20σy​ = −10τxy​ = 10MPa

A point in a thin plate is in plane stress: σₓ = 20 MPa, σᵧ = −10 MPa and τₓᵧ = 10 MPa (σz = 0). The material has a yield strength of 300 MPa. Find the factor of safety n against yielding by the Tresca (maximum shear stress) criterion.

σx = 20 MPaσy = −10 MPaτxy = 10 MPaσY = 300 MPa
n =
7.Axial stress & strainMedium
Ø 30 mmAluminium1 mP = 65 kN

Find the elongation δ of the aluminium bar under the axial load.

P = 65 kNd = 30 mmL = 1 mE = 70 GPa
δ = mm
8.Axial stress & strainHard
Ø 40 mmBrass1.5 mØ 16 mmBrass1.5 mP = 110 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the largest normal stress σmax in the bar.

P = 110 kNsegment 1: Ø40 mm, 1.5 m, brass (E = 100 GPa)segment 2: Ø16 mm, 1.5 m, brass (E = 100 GPa)
σmax = MPa
9.Column bucklingMedium
PL = 3 md = 30 mmcross-section

A column of length L made of aluminium is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 3 mE = 70 GPa (aluminium)d = 30 mm
Pcr = kN
10.Column bucklingHard
PL = 2 md = 40 mmcross-section

A column of length L made of aluminium is fixed at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 2 mE = 70 GPa (aluminium)d = 40 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 80 kN/mc = 1310 N·s/mm = 15 kg

A 15 kg mass is supported by a spring with a stiffness of 80 kN/m and a viscous damper with a damping coefficient of 1310 N·s/m. Find the damping ratio ζ.

m = 15 kgk = 80 kN/mc = 1310 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 10k2​ = 10k3​ = 10m = 50 kg

A 50 kg mass hangs from spring k₃ = 10 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 10 kN/m and k₂ = 10 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 10 kN/mk2 = 10 kN/mk3 = 10 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: n2 = 475.2 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

720·200/300 = 480 rpm

With slip

n2 = 480·0.99 = 475.2 rpm

Answer

n2 = 475.2 rpm
2.Gears & gear trains

Answer: Tout = 45.44 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1450·(16/32)·(12/20) = 435 rpm
ωout = 2π·435/60 = 45.55 rad/s

Output power and torque

Pout = 2200·0.97² = 2070 W
Tout = Pout/ωout = 2070/45.55 = 45.44 N·m

Answer

Tout = 45.44 N·m
3.Torsion of shafts

Answer: φ = 9.577 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·25⁴/32 = 38350 mm⁴

Angle of twist

φ = TL/(GJ) = 250·1000·1000/(39000·38350) = 0.1672 rad
φ = 0.1672·180/π = 9.577°

Answer

φ = 9.577°
4.Torsion of shafts

Answer: d = 78.57 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·750/60 = 78.54 rad/s
T = P/ω = 50000/78.54 = 636.6 N·m

Diameter for strength

T = 636.6 N·m = 636620 N·mm
dτ = ∛(16·636620/(π·60)) = 37.81 mm

Diameter for stiffness

θ = 0.25·π/180/1000 = 4.363 × 10⁻⁶ rad/mm
G = 39 GPa = 39000 MPa
dφ = (32·636620/(π·39000·4.363 × 10⁻⁶))1/4 = 78.57 mm

Governing diameter

Both limits must hold, so the larger diameter governs.

d = max(37.81, 78.57) = 78.57 mm

Answer

d = 78.57 mm

Here stiffness governs.

5.Mohr’s circle & stress transformation

Answer: σy′ = −49.05 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation for the y′ face

σy′ = −20 − 30·0.342 − 20·0.9397 = −49.05 MPa

Check

The sum of the normal stresses does not change with rotation.

σx′ = 9.054 MPa, σx′ + σy′ = −40 = σx + σy

Answer

σy′ = −49.05 MPa
6.Mohr’s circle & stress transformation

Answer: n = 8.321

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Yield criteria: von Mises predicts yield when σvM = √(σ₁² − σ₁σ₂ + σ₂²) reaches σY; Tresca when the absolute maximum shear stress reaches σY/2.

στxyCσ1​σ2​

Principal stresses

C = 5 MPa, R = 18.03 MPa
σ1 = 23.03 MPa, σ2 = −13.03 MPa, σ3 = 0

Tresca

σmax − σmin = 36.06 MPa
n = 300/36.06 = 8.321

Answer

n = 8.321

n > 1 means the point does not yield; Tresca is slightly more conservative than von Mises.

7.Axial stress & strain

Answer: δ = 1.314 mm

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·30²/4 = 706.9 mm²
σ = P/A = 65·1000/706.9 = 91.96 MPa

Strain (Hooke’s law)

E for aluminium = 70 GPa = 70000 MPa.

ε = σ/E = 91.96/70000 = 0.001314 = 1314 µε

Elongation

δ = ε·L = 0.001314·1000 mm = 1.314 mm

Answer

δ = 1.314 mm
8.Axial stress & strain

Answer: σmax = 547.1 MPa

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·40²/4 = 1257 mm², A2 = π·16²/4 = 201.1 mm²
σ1 = 87.54 MPa
σ2 = 547.1 MPa

Largest stress

The thinner segment has the smaller area, so it carries the larger stress.

σmax = 547.1 MPa

Answer

σmax = 547.1 MPa
9.Column buckling

Answer: Pcr = 6.229 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·30⁴/64 = 39761 mm⁴

Effective length

KL = 0.7·3000 = 2100 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·39761/2100² = 6229 N = 6.229 kN

Answer

Pcr = 6.229 kN
10.Column buckling

Answer: σcr = 69.09 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·40⁴/64 = 125664 mm⁴

Radius of gyration and slenderness

A = 1257 mm²
r = √(I/A) = √(125664/1257) = 10 mm
KL = 0.5·2000 = 1000 mm
KL/r = 1000/10 = 100

Critical stress

σcr = π²E/(KL/r)² = π²·70000/100² = 69.09 MPa

Answer

σcr = 69.09 MPa
11.Mechanical vibrations

Answer: ζ = 0.5979

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(80000·15) = 2191 N·s/m

Damping ratio

ζ = c/cc = 1310/2191 = 0.5979

Answer

ζ = 0.5979

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: fn = 1.838 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 10 + 10 = 20 kN/m
keq = 20·10/(20 + 10) = 6.667 kN/m

Natural frequency

ωn = √(6667/50) = 11.55 rad/s
fn = 11.55/(2π) = 1.838 Hz

Answer

fn = 1.838 Hz

ExamProblems · examproblems.com/courses/machine-design