Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 32N2​ = 48

A 15 kW motor running at 1450 rpm drives a pinion with 32 teeth, which meshes with a gear with 48 teeth. The gear pair has an efficiency of 95%. Find the output torque T2 on the gear shaft.

P = 15 kWn1 = 1450 rpmN1 = 32N2 = 48η = 95%
T2 = N·m
2.Gears & gear trainsHard
A = 16B = 32C = 32D = 36

In a compound gear train, gear A (16 teeth) on the input shaft turning at 3000 rpm drives gear B (32 teeth). Gear C (32 teeth) is fixed to the same shaft as B and drives gear D (36 teeth) on the output shaft. Find the output speed nout.

nin = 3000 rpmA = 16B = 32C = 32D = 36
nout = rpm
3.Torsion of shaftsMedium
do​ = ?T = 2000 N·m

A hollow shaft must carry a torque of 2000 N·m. Its inner diameter is to be 0.6 times its outer diameter, and the shear stress must not exceed 80 MPa. Find the smallest outer diameter do.

T = 2000 N·mdi/do = 0.6τallow = 80 MPa
do = mm
4.Torsion of shaftsHard
d = 50 mmTB​ = 2000 N·mTC​ = 1000 N·mABC1.5 m0.8 m

A solid steel shaft of diameter 50 mm is fixed at A. A torque of 2000 N·m acts at B, 1.5 m from A, and a torque of 1000 N·m in the opposite direction acts at the free end C, a further 0.8 m along. Find the magnitude of the angle of twist φC of end C, in degrees.

d = 50 mmTB = 2000 N·mTC = 1000 N·mAB = 1.5 mBC = 0.8 mG = 80 GPa
φC = °
5.Mohr’s circle & stress transformationMedium
σx​ = −70σy​ = 120τxy​ = −50MPa

A point in a loaded part has σₓ = −70 MPa, σᵧ = 120 MPa and τₓᵧ = −50 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = −70 MPaσy = 120 MPaτxy = −50 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 10σy​ = 40τxy​ = −60MPa

A point in a loaded part has σₓ = 10 MPa, σᵧ = 40 MPa and τₓᵧ = −60 MPa (tension positive). Find the normal stress σθ on a plane whose normal is rotated 40° counter-clockwise from the x-axis.

σx = 10 MPaσy = 40 MPaτxy = −60 MPaθ = 40°
σθ = MPa
7.Axial stress & strainMedium
P = ?12300 mm400 mmØ20Ø50δ = 0.4 mm

A bar is made of a steel segment (diameter 20 mm, length 300 mm, E = 200 GPa) joined end to end with a segment made of brass (diameter 50 mm, length 400 mm, E = 100 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.4 mm in total.

segment 1: steel, Ø20 mm, 300 mm, E = 200 GPasegment 2: brass, Ø50 mm, 400 mm, E = 100 GPaδ = 0.4 mm
P = kN
8.Axial stress & strainHard
Ø 40 mmAluminium1 mØ 12 mmSteel0.5 mP = 75 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 75 kNsegment 1: Ø40 mm, 1 m, aluminium (E = 70 GPa)segment 2: Ø12 mm, 0.5 m, steel (E = 200 GPa)
δ = mm
9.Column bucklingMedium
PL = 6 md = 80 mmcross-section

A column of length L made of steel is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 6 mE = 200 GPa (steel)d = 80 mm
Pcr = kN
10.Column bucklingHard
PL = 4 md = 40 mmcross-section

A column of length L made of aluminium is pinned at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 4 mE = 70 GPa (aluminium)d = 40 mm
σcr = MPa
11.Mechanical vibrationsMedium
tx25 mm2 cycles19.4 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 25 mm is followed 2 cycles later by a peak of 19.4 mm. Find the damping ratio ζ.

x0 = 25 mmx2 = 19.4 mmn = 2
ζ =
12.Mechanical vibrationsHard
k1​ = 25k2​ = 80k3​ = 100m = 25 kg

A 25 kg mass hangs from spring k₃ = 100 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 25 kN/m and k₂ = 80 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 25 kN/mk2 = 80 kN/mk3 = 100 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T2 = 140.8 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 15000/151.8 = 98.79 N·m

Output torque

T2 = 98.79·48/32·0.95 = 140.8 N·m

Answer

T2 = 140.8 N·m
2.Gears & gear trains

Answer: nout = 1333 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 3000·16/32 = 1500 rpm = nC

Second stage

nout = 1500·32/36 = 1333 rpm

Answer

nout = 1333 rpm

total ratio = 2.25 : 1

3.Torsion of shafts

Answer: do = 52.69 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Outer diameter from the allowable stress

T = 2000 N·m = 2 × 10⁶ N·mm
1 − k⁴ = 1 − 0.6⁴ = 0.8704
do = ∛(16T/(π·τallow·(1 − k⁴))) = ∛(16·2 × 10⁶/(π·80·0.8704)) = 52.69 mm
di = 0.6·52.69 = 31.61 mm

Answer

do = 52.69 mm

A solid shaft would need d = 50.31 mm; the hollow one is a little larger but much lighter.

4.Torsion of shafts

Answer: φC = 0.8171 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Internal torques

Sense of TC taken as positive.

TBC = TC = 1000 N·m
TAB = TC − TB = 1000 − 2000 = −1000 N·m

Twist of each segment

J = π·50⁴/32 = 613592 mm⁴
G = 80 GPa = 80000 MPa
φAB = −1 × 10⁶·1500/(80000·613592) = −0.03056 rad
φBC = 1 × 10⁶·800/(80000·613592) = 0.0163 rad

Twist of end C

φC = −0.03056 + 0.0163 = −0.01426 rad → |φC| = 0.8171°

Answer

φC = 0.8171°
5.Mohr’s circle & stress transformation

Answer: τmax = 107.4 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((−70 − 120)/2)² + −50²) = 107.4 MPa

Answer

τmax = 107.4 MPa
6.Mohr’s circle & stress transformation

Answer: σθ = −36.69 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

σθ = 25 + −15·0.1736 + −60·0.9848 = −36.69 MPa

Answer

σθ = −36.69 MPa
7.Axial stress & strain

Answer: P = 58.72 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 314.2 mm², A₂ = 1963 mm²

Flexibilities

L₁/(E₁A₁) = 300/(200000·314.2) = 4.775 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 400/(100000·1963) = 2.037 × 10⁻⁶ mm/N

Load

P = 0.4/6.812 × 10⁻⁶ = 58721 N = 58.72 kN

Answer

P = 58.72 kN
8.Axial stress & strain

Answer: δ = 2.51 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·40²/4 = 1257 mm², A2 = π·12²/4 = 113.1 mm²
σ1 = 59.68 MPa
σ2 = 663.1 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 59.68·1000/70000 = 0.8526 mm
δ2 = σ2L2/E2 = 663.1·500/200000 = 1.658 mm
δ = δ1 + δ2 = 2.51 mm

Answer

δ = 2.51 mm
9.Column buckling

Answer: Pcr = 225 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·80⁴/64 = 2.011 × 10⁶ mm⁴

Effective length

KL = 0.7·6000 = 4200 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·2.011 × 10⁶/4200² = 224989 N = 225 kN

Answer

Pcr = 225 kN
10.Column buckling

Answer: σcr = 4.318 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·40⁴/64 = 125664 mm⁴

Radius of gyration and slenderness

A = 1257 mm²
r = √(I/A) = √(125664/1257) = 10 mm
KL = 1·4000 = 4000 mm
KL/r = 4000/10 = 400

Critical stress

σcr = π²E/(KL/r)² = π²·70000/400² = 4.318 MPa

Answer

σcr = 4.318 MPa
11.Mechanical vibrations

Answer: ζ = 0.02018

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/2)·ln(25/19.4) = 0.1268

Damping ratio

ζ = δ/√(4π² + δ²) = 0.1268/√(39.48 + 0.01608) = 0.02018

Answer

ζ = 0.02018
12.Mechanical vibrations

Answer: fn = 7.204 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 25 + 80 = 105 kN/m
keq = 105·100/(105 + 100) = 51.22 kN/m

Natural frequency

ωn = √(51220/25) = 45.26 rad/s
fn = 45.26/(2π) = 7.204 Hz

Answer

fn = 7.204 Hz

ExamProblems · examproblems.com/courses/machine-design