Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 16N2​ = 24

A 0.75 kW motor running at 1500 rpm drives a pinion with 16 teeth, which meshes with a gear with 24 teeth. The gear pair has an efficiency of 96%. Find the torque T1 on the motor shaft.

P = 0.75 kWn1 = 1500 rpmN1 = 16N2 = 24η = 96%
T1 = N·m
2.Gears & gear trainsHard
d1​ = 120 mmd2​ = 200 mm960 rpmC = 500 mmT1​ = 1000 NT2​P = ?

An open belt connects a 120 mm driving pulley at 960 rpm to a 200 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 1000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 120 mmn1 = 960 rpmd2 = 200 mmC = 500 mmμ = 0.25T1 = 1000 N
P = kW
3.Torsion of shaftsMedium
T = 100 N·md = 30 mmL = 1.2 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 100 N·md = 30 mmL = 1.2 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 20 kW at 1500 rpm without the shear stress exceeding 50 MPa. Find the smallest diameter d that works.

P = 20 kWN = 1500 rpmτallow = 50 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = −40σy​ = −20τxy​ = 50MPa

A point in a loaded part has σₓ = −40 MPa, σᵧ = −20 MPa and τₓᵧ = 50 MPa (tension positive). Find the angle θp from the x-axis to the direction of the largest principal stress, between −90° and 90°.

σx = −40 MPaσy = −20 MPaτxy = 50 MPa
θp = °
6.Mohr’s circle & stress transformationHard
σx​ = 160σy​ = −80τxy​ = 10MPa

A point in a loaded part has σₓ = 160 MPa, σᵧ = −80 MPa and τₓᵧ = 10 MPa (tension positive). Find the normal stress σθ on a plane whose normal is rotated 50° counter-clockwise from the x-axis.

σx = 160 MPaσy = −80 MPaτxy = 10 MPaθ = 50°
σθ = MPa
7.Axial stress & strainMedium
Ø 30 mmBrass1 mP = 45 kN

Find the axial strain ε in the brass bar, in microstrain (µε = 10⁻⁶).

P = 45 kNd = 30 mmL = 1 mE = 100 GPa
ε = µε
8.Axial stress & strainHard
Ø 40 mmBrass1.5 mØ 20 mmSteel0.5 mP = 90 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the largest normal stress σmax in the bar.

P = 90 kNsegment 1: Ø40 mm, 1.5 m, brass (E = 100 GPa)segment 2: Ø20 mm, 0.5 m, steel (E = 200 GPa)
σmax = MPa
9.Column bucklingMedium
PL = 2 md = 25 mmcross-section

A column of length L made of aluminium is fixed at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 2 mE = 70 GPa (aluminium)d = 25 mm
Pcr = kN
10.Column bucklingHard
P = 5 kNL = 4 md = ?cross-section

A solid round column of length L made of steel is fixed at both ends. It must carry 5 kN with a factor of safety of 2.5 against buckling. Find the smallest diameter d.

P = 5 kNn = 2.5L = 4 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
k = 10 kN/mc = 270 N·s/mm = 20 kg

A 20 kg mass is supported by a spring with a stiffness of 10 kN/m and a viscous damper with a damping coefficient of 270 N·s/m. Find the damping ratio ζ.

m = 20 kgk = 10 kN/mc = 270 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 15k2​ = 12m = 100 kg

A 100 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 15 kN/m and k₂ = 12 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 15 kN/mk2 = 12 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T1 = 4.775 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 750/157.1 = 4.775 N·m

Answer

T1 = 4.775 N·m
2.Gears & gear trains

Answer: P = 3.169 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.981 rad

Slack-side tension

eμθ = e0.7454 = 2.107, T₂ = 1000/2.107 = 474.6 N

Power

P = (1000 − 474.6)·6.032 = 3.169 kW

Answer

P = 3.169 kW
3.Torsion of shafts

Answer: φ = 1.081 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·30⁴/32 = 79522 mm⁴

Angle of twist

φ = TL/(GJ) = 100·1000·1200/(80000·79522) = 0.01886 rad
φ = 0.01886·180/π = 1.081°

Answer

φ = 1.081°
4.Torsion of shafts

Answer: d = 23.49 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1500/60 = 157.1 rad/s
T = P/ω = 20000/157.1 = 127.3 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·127324/(π·50)) = 23.49 mm

Answer

d = 23.49 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: θp = 50.65 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCσ1​σ2​

Angle on the circle

Point x sits at an angle 2θp from the σ-axis on Mohr’s circle; the quadrant follows from the signs of σₓ − σᵧ and τₓᵧ.

2θp = atan2(2·50, −40 − −20) = 101.3°

Angle on the element

θp = 50.65°

Answer

θp = 50.65°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: σθ = 29.01 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

σθ = 40 + 120·−0.1736 + 10·0.9848 = 29.01 MPa

Answer

σθ = 29.01 MPa
7.Axial stress & strain

Answer: ε = 636.6 µε

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·30²/4 = 706.9 mm²
σ = P/A = 45·1000/706.9 = 63.66 MPa

Strain (Hooke’s law)

E for brass = 100 GPa = 100000 MPa.

ε = σ/E = 63.66/100000 = 0.0006366 = 636.6 µε

Answer

ε = 636.6 µε
8.Axial stress & strain

Answer: σmax = 286.5 MPa

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·40²/4 = 1257 mm², A2 = π·20²/4 = 314.2 mm²
σ1 = 71.62 MPa
σ2 = 286.5 MPa

Largest stress

The thinner segment has the smaller area, so it carries the larger stress.

σmax = 286.5 MPa

Answer

σmax = 286.5 MPa
9.Column buckling

Answer: Pcr = 13.25 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·25⁴/64 = 19175 mm⁴

Effective length

KL = 0.5·2000 = 1000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·19175/1000² = 13247 N = 13.25 kN

Answer

Pcr = 13.25 kN
10.Column buckling

Answer: d = 26.8 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2.5·5000 = 12500 N
KL = 0.5·4000 = 2000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·12500·2000²/(π³·200000))^(1/4) = 26.8 mm

Answer

d = 26.8 mm

Check: the slenderness KL/r is 298.5, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.3019

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(10000·20) = 894.4 N·s/m

Damping ratio

ζ = c/cc = 270/894.4 = 0.3019

Answer

ζ = 0.3019

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: fn = 2.615 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 15 + 12 = 27 kN/m

Natural frequency

ωn = √(27000/100) = 16.43 rad/s
fn = 16.43/(2π) = 2.615 Hz

Answer

fn = 2.615 Hz

ExamProblems · examproblems.com/courses/machine-design