Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 25N2​ = 48

A 5.5 kW motor running at 1500 rpm drives a pinion with 25 teeth, which meshes with a gear with 48 teeth. The gear pair has an efficiency of 95%. Find the torque T1 on the motor shaft.

P = 5.5 kWn1 = 1500 rpmN1 = 25N2 = 48η = 95%
T1 = N·m
2.Gears & gear trainsHard
A = 60B = 72C = 18D = 48

An 11 kW motor at 2900 rpm drives gear A (60 teeth), which meshes with gear B (72 teeth). Gear C (18 teeth) on the same shaft as B drives gear D (48 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.

P = 11 kWnin = 2900 rpmA = 60B = 72C = 18D = 48ηmesh = 97%
Tout = N·m
3.Torsion of shaftsMedium
do​ = 60, di​ = 36 mmT = 750 N·mL = 0.8 m

A hollow brass shaft (outer diameter 60 mm, inner diameter 36 mm, length 0.8 m) is fixed at one end and twisted by a torque of 750 N·m at the other. Find the angle of twist φ in degrees.

T = 750 N·mdo = 60 mmdi = 36 mmL = 0.8 mG = 39 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 100 kW at 750 rpm without the shear stress exceeding 50 MPa. Find the smallest diameter d that works.

P = 100 kWN = 750 rpmτallow = 50 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 0σy​ = −10τxy​ = −60MPa

A point in a loaded part has σₓ = 0 MPa, σᵧ = −10 MPa and τₓᵧ = −60 MPa (tension positive). Find the angle θp from the x-axis to the direction of the largest principal stress, between −90° and 90°.

σx = 0 MPaσy = −10 MPaτxy = −60 MPa
θp = °
6.Mohr’s circle & stress transformationHard
σx​ = −30σy​ = −40τxy​ = 20MPa

A point in a loaded part has σₓ = −30 MPa, σᵧ = −40 MPa and τₓᵧ = 20 MPa (tension positive). Find the shear stress τθ on a plane whose normal is rotated 30° counter-clockwise from the x-axis (positive in the same sense as τₓᵧ).

σx = −30 MPaσy = −40 MPaτxy = 20 MPaθ = 30°
τθ = MPa
7.Axial stress & strainMedium
P = ?12500 mm400 mmØ40Ø30δ = 0.3 mm

A bar is made of a steel segment (diameter 40 mm, length 500 mm, E = 200 GPa) joined end to end with a segment made of bronze (diameter 30 mm, length 400 mm, E = 110 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.3 mm in total.

segment 1: steel, Ø40 mm, 500 mm, E = 200 GPasegment 2: bronze, Ø30 mm, 400 mm, E = 110 GPaδ = 0.3 mm
P = kN
8.Axial stress & strainHard
P = ?Ø25100 GPaØ100/70300 mm

A steel rod (diameter 25 mm, E = 200 GPa, allowable stress 120 MPa) sits inside a tube made of brass (outer diameter 100 mm, inner diameter 70 mm, E = 100 GPa, allowable stress 100 MPa). They are compressed together between rigid plates. Find the largest load Pmax.

rod: Ø25 mm, E = 200 GPa, σallow = 120 MPatube: Ø100/Ø70 mm, E = 100 GPa, σallow = 100 MPa
Pmax = kN
9.Column bucklingMedium
PL = 2.5 m50 × 100 mmcross-section

A column of length L made of aluminium is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 2.5 mE = 70 GPa (aluminium)b × h = 50 × 100 mm
Pcr = kN
10.Column bucklingHard
PL = 3 md = 25 mmcross-section

A column of length L made of aluminium is fixed at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 3 mE = 70 GPa (aluminium)d = 25 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 5 kN/mc = 20 N·s/mm = 2 kg

A 2 kg mass is supported by a spring with a stiffness of 5 kN/m and a viscous damper with a damping coefficient of 20 N·s/m. Find the damping ratio ζ.

m = 2 kgk = 5 kN/mc = 20 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 60k2​ = 5k3​ = 25m = 40 kg

A 40 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 60 kN/m and k₂ = 5 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 60 kN/mk2 = 5 kN/mk3 = 25 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T1 = 35.01 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 5500/157.1 = 35.01 N·m

Answer

T1 = 35.01 N·m
2.Gears & gear trains

Answer: Tout = 109.1 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 2900·(60/72)·(18/48) = 906.3 rpm
ωout = 2π·906.3/60 = 94.9 rad/s

Output power and torque

Pout = 11000·0.97² = 10350 W
Tout = Pout/ωout = 10350/94.9 = 109.1 N·m

Answer

Tout = 109.1 N·m
3.Torsion of shafts

Answer: φ = 0.7959 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π(60⁴ − 36⁴)/32 = 1.107 × 10⁶ mm⁴

Angle of twist

T = 750 N·m = 750000 N·mm
L = 0.8 m = 800 mm
G = 39 GPa = 39000 MPa
φ = TL/(GJ) = 750000·800/(39000·1.107 × 10⁶) = 0.01389 rad
φ = 0.01389·180/π = 0.7959°

Answer

φ = 0.7959°
4.Torsion of shafts

Answer: d = 50.62 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·750/60 = 78.54 rad/s
T = P/ω = 100000/78.54 = 1273 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·1.273 × 10⁶/(π·50)) = 50.62 mm

Answer

d = 50.62 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: θp = −42.62 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCσ1​σ2​

Angle on the circle

Point x sits at an angle 2θp from the σ-axis on Mohr’s circle; the quadrant follows from the signs of σₓ − σᵧ and τₓᵧ.

2θp = atan2(2·−60, 0 − −10) = −85.24°

Angle on the element

θp = −42.62°

Answer

θp = −42.62°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: τθ = 5.67 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

τθ = −5·0.866 + 20·0.5 = 5.67 MPa

Answer

τθ = 5.67 MPa
7.Axial stress & strain

Answer: P = 42.05 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 1257 mm², A₂ = 706.9 mm²

Flexibilities

L₁/(E₁A₁) = 500/(200000·1257) = 1.989 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 400/(110000·706.9) = 5.144 × 10⁻⁶ mm/N

Load

P = 0.3/7.134 × 10⁻⁶ = 42053 N = 42.05 kN

Answer

P = 42.05 kN
8.Axial stress & strain

Answer: Pmax = 299.2 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·25²/4 = 490.9 mm²
At = π(100² − 70²)/4 = 4006 mm²

Combined axial stiffness

ΣEA = 200·10³·490.9 + 100·10³·4006 = 4.987 × 10⁸ N

Governing strain

ε = min(0.0006, 0.001) = 0.0006 (steel)

Largest load

Pmax = 0.0006·4.987 × 10⁸ = 299237 N = 299.2 kN

Answer

Pmax = 299.2 kN
9.Column buckling

Answer: Pcr = 235 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 100·50³/12 = 1.042 × 10⁶ mm⁴

Effective length

KL = 0.7·2500 = 1750 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·1.042 × 10⁶/1750² = 234991 N = 235 kN

Answer

Pcr = 235 kN
10.Column buckling

Answer: σcr = 11.99 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·25⁴/64 = 19175 mm⁴

Radius of gyration and slenderness

A = 490.9 mm²
r = √(I/A) = √(19175/490.9) = 6.25 mm
KL = 0.5·3000 = 1500 mm
KL/r = 1500/6.25 = 240

Critical stress

σcr = π²E/(KL/r)² = π²·70000/240² = 11.99 MPa

Answer

σcr = 11.99 MPa
11.Mechanical vibrations

Answer: ζ = 0.1

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(5000·2) = 200 N·s/m

Damping ratio

ζ = c/cc = 20/200 = 0.1

Answer

ζ = 0.1

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: fn = 3.381 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 60 + 5 = 65 kN/m
keq = 65·25/(65 + 25) = 18.06 kN/m

Natural frequency

ωn = √(18056/40) = 21.25 rad/s
fn = 21.25/(2π) = 3.381 Hz

Answer

fn = 3.381 Hz

ExamProblems · examproblems.com/courses/machine-design