Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
d1​ = 120 mmd2​ = 300 mm2880 rpmT1​ = 400 NT2​ = 160 NP = ?

A belt runs on a 120 mm driving pulley at 2880 rpm. The tension is 400 N on the tight side and 160 N on the slack side. Find the power P transmitted, in kW.

d1 = 120 mmn1 = 2880 rpmT1 = 400 NT2 = 160 N
P = kW
2.Gears & gear trainsHard
d1​ = 120 mmd2​ = 200 mm960 rpmC = 1000 mmT1​ = 800 NT2​P = ?

An open belt connects a 120 mm driving pulley at 960 rpm to a 200 mm pulley; the centres are 1000 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 800 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 120 mmn1 = 960 rpmd2 = 200 mmC = 1000 mmμ = 0.25T1 = 800 N
P = kW
3.Torsion of shaftsMedium
T = 250 N·md = 25 mmL = 0.5 mφ = ?

A solid aluminium shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 250 N·md = 25 mmL = 0.5 mG = 26 GPa
φ = °
4.Torsion of shaftsHard
d = 40 mmT0​ = 100 N·mACBa = 1 mb = 0.5 m

A solid aluminium shaft of diameter 40 mm is fixed to rigid walls at both ends A and B. A torque of 100 N·m is applied at C, 1 m from A and 0.5 m from B. Find the maximum shear stress τmax in the shaft.

d = 40 mmT0 = 100 N·ma = 1 mb = 0.5 m
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = 20σy​ = 100τxy​ = 10MPa

A point in a loaded part has σₓ = 20 MPa, σᵧ = 100 MPa and τₓᵧ = 10 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = 20 MPaσy = 100 MPaτxy = 10 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​τxy​top surface of the shaft

A solid shaft of diameter 40 mm carries a bending moment of 500 N·m together with a torque of 500 N·m. At the top surface, where the bending stress is tensile and largest, find the maximum in-plane shear stress τmax.

d = 40 mmM = 500 N·mT = 500 N·m
τmax = MPa
7.Axial stress & strainMedium
P = ?12300 mm300 mmØ25Ø40δ = 0.3 mm

A bar is made of a steel segment (diameter 25 mm, length 300 mm, E = 200 GPa) joined end to end with a segment made of bronze (diameter 40 mm, length 300 mm, E = 110 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.3 mm in total.

segment 1: steel, Ø25 mm, 300 mm, E = 200 GPasegment 2: bronze, Ø40 mm, 300 mm, E = 110 GPaδ = 0.3 mm
P = kN
8.Axial stress & strainHard
80 kN12600 mm500 mmØ40Ø30σ2​ = ?

A steel segment (diameter 40 mm, length 600 mm, E = 200 GPa) and a segment made of copper (diameter 30 mm, length 500 mm, E = 120 GPa) are joined end to end and fixed between two rigid walls. An axial load of 80 kN acts at the joint, towards segment 2. Find the magnitude of the stress σ2 in segment 2.

segment 1: steel, Ø40 mm, 600 mm, E = 200 GPasegment 2: copper, Ø30 mm, 500 mm, E = 120 GPaP = 80 kN
σ2 = MPa
9.Column bucklingMedium
PL = 1 md = 25 mmcross-section

A column of length L made of aluminium is pinned at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 1 mE = 70 GPa (aluminium)d = 25 mm
Pcr = kN
10.Column bucklingHard
P = 90 kNL = 2 md = ?cross-section

A solid round column of length L made of steel is pinned at both ends. It must carry 90 kN with a factor of safety of 2.5 against buckling. Find the smallest diameter d.

P = 90 kNn = 2.5L = 2 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
tx30 mm2 cycles20.6 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 30 mm is followed 2 cycles later by a peak of 20.6 mm. Find the damping ratio ζ.

x0 = 30 mmx2 = 20.6 mmn = 2
ζ =
12.Mechanical vibrationsHard
k1​ = 60k2​ = 15k3​ = 60m = 10 kg

A 10 kg mass hangs from spring k₃ = 60 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 60 kN/m and k₂ = 15 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 60 kN/mk2 = 15 kN/mk3 = 60 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: P = 4.343 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 18.1 m/s

Power

P = (400 − 160)·18.1 = 4343 W = 4.343 kW

Answer

P = 4.343 kW
2.Gears & gear trains

Answer: P = 2.581 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 3.062 rad

Slack-side tension

eμθ = e0.7654 = 2.15, T₂ = 800/2.15 = 372.1 N

Power

P = (800 − 372.1)·6.032 = 2.581 kW

Answer

P = 2.581 kW
3.Torsion of shafts

Answer: φ = 7.183 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·25⁴/32 = 38350 mm⁴

Angle of twist

φ = TL/(GJ) = 250·1000·500/(26000·38350) = 0.1254 rad
φ = 0.1254·180/π = 7.183°

Answer

φ = 7.183°
4.Torsion of shafts

Answer: τmax = 5.305 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω. When both ends are fixed, statics alone gives only TA + TB = T₀; the second equation is compatibility (equal twist of both parts at the loaded section).

Equilibrium and compatibility

TA + TB = 100
TA·a = TB·b
TA = 100·0.5/1.5 = 33.33 N·m
TB = 100·1/1.5 = 66.67 N·m

Maximum shear stress

The larger of the two torques governs (same diameter).

τmax = 16·66667/(π·40³) = 5.305 MPa

Answer

τmax = 5.305 MPa
5.Mohr’s circle & stress transformation

Answer: τmax = 41.23 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((20 − 100)/2)² + 10²) = 41.23 MPa

Answer

τmax = 41.23 MPa
6.Mohr’s circle & stress transformation

Answer: τmax = 56.27 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Stresses at the surface

σ = 32M/(πd³) = 32·500000/(π·40³) = 79.58 MPa
τ = 16T/(πd³) = 16·500000/(π·40³) = 39.79 MPa
στxyCτmax​

Mohr’s circle

C = σ/2 = 39.79 MPa
R = √(39.79² + 39.79²) = 56.27 MPa

Answer

τmax = 56.27 MPa
7.Axial stress & strain

Answer: P = 57.4 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 490.9 mm², A₂ = 1257 mm²

Flexibilities

L₁/(E₁A₁) = 300/(200000·490.9) = 3.056 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 300/(110000·1257) = 2.17 × 10⁻⁶ mm/N

Load

P = 0.3/5.226 × 10⁻⁶ = 57405 N = 57.4 kN

Answer

P = 57.4 kN
8.Axial stress & strain

Answer: σ2 = 32.62 MPa

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Stiffnesses

k₁ = 200000·1257/600 = 418879 N/mm
k₂ = 120000·706.9/500 = 169646 N/mm

Share of segment 2

F2 = 80000·169646/588525 = 23060 N

Stress

σ2 = 23060/706.9 = 32.62 MPa (compression)

Answer

σ2 = 32.62 MPa
9.Column buckling

Answer: Pcr = 13.25 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·25⁴/64 = 19175 mm⁴

Effective length

KL = 1·1000 = 1000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·19175/1000² = 13247 N = 13.25 kN

Answer

Pcr = 13.25 kN
10.Column buckling

Answer: d = 55.21 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2.5·90000 = 225000 N
KL = 1·2000 = 2000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·225000·2000²/(π³·200000))^(1/4) = 55.21 mm

Answer

d = 55.21 mm

Check: the slenderness KL/r is 144.9, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.0299

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/2)·ln(30/20.6) = 0.188

Damping ratio

ζ = δ/√(4π² + δ²) = 0.188/√(39.48 + 0.03533) = 0.0299

Answer

ζ = 0.0299
12.Mechanical vibrations

Answer: fn = 9.189 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 60 + 15 = 75 kN/m
keq = 75·60/(75 + 60) = 33.33 kN/m

Natural frequency

ωn = √(33333/10) = 57.74 rad/s
fn = 57.74/(2π) = 9.189 Hz

Answer

fn = 9.189 Hz

ExamProblems · examproblems.com/courses/machine-design