Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 16N2​ = 80

A 15 kW motor running at 960 rpm drives a pinion with 16 teeth, which meshes with a gear with 80 teeth. The gear pair has an efficiency of 97%. Find the output torque T2 on the gear shaft.

P = 15 kWn1 = 960 rpmN1 = 16N2 = 80η = 97%
T2 = N·m
2.Gears & gear trainsHard
d1​ = 80 mmd2​ = 315 mm720 rpmC = 800 mmθ = ?

An open belt connects an 80 mm pulley and a 315 mm pulley whose centres are 800 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 80 mmd2 = 315 mmC = 800 mm
θ = °
3.Torsion of shaftsMedium
T = 200 N·md = 20 mmL = 2.5 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 200 N·md = 20 mmL = 2.5 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
d = 40 mmTB​ = 200 N·mTC​ = 2000 N·mABC1.2 m0.8 m

A solid brass shaft of diameter 40 mm is fixed at A. A torque of 200 N·m acts at B, 1.2 m from A, and a torque of 2000 N·m in the opposite direction acts at the free end C, a further 0.8 m along. Find the magnitude of the angle of twist φC of end C, in degrees.

d = 40 mmTB = 200 N·mTC = 2000 N·mAB = 1.2 mBC = 0.8 mG = 39 GPa
φC = °
5.Mohr’s circle & stress transformationMedium
σx​ = 110σy​ = 90τxy​ = 40MPa

A point in a loaded part has σₓ = 110 MPa, σᵧ = 90 MPa and τₓᵧ = 40 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = 110 MPaσy = 90 MPaτxy = 40 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 130σy​ = 100τxy​ = −10MPa

A point in a thin plate is in plane stress: σₓ = 130 MPa, σᵧ = 100 MPa and τₓᵧ = −10 MPa (σz = 0). The material has a yield strength of 275 MPa. Find the factor of safety n against yielding by the Tresca (maximum shear stress) criterion.

σx = 130 MPaσy = 100 MPaτxy = −10 MPaσY = 275 MPa
n =
7.Axial stress & strainMedium
200 kNØ40100 GPaØ100/70800 mmδ = ?

A steel rod (diameter 40 mm, E = 200 GPa) sits inside a tube made of brass (outer diameter 100 mm, inner diameter 70 mm, E = 100 GPa). Both are 800 mm long and are compressed together between rigid plates by 200 kN. Find the shortening δ.

P = 200 kNrod: Ø40 mm, E = 200 GPatube: Ø100/Ø70 mm, E = 100 GPaL = 800 mm
δ = mm
8.Axial stress & strainHard
Ø 40 mmCopper1 mØ 20 mmBrass2 mP = 90 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 90 kNsegment 1: Ø40 mm, 1 m, copper (E = 117 GPa)segment 2: Ø20 mm, 2 m, brass (E = 100 GPa)
δ = mm
9.Column bucklingMedium
PL = 1 md = 60 mmcross-section

A column of length L made of aluminium is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 1 mE = 70 GPa (aluminium)d = 60 mm
Pcr = kN
10.Column bucklingHard
P = 85 kNL = 6 md = ?cross-section

A solid round column of length L made of steel is fixed at the base and free at the top. It must carry 85 kN with a factor of safety of 2 against buckling. Find the smallest diameter d.

P = 85 kNn = 2L = 6 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
k = 5 kN/mζ = 0.7m = 10 kg

A 10 kg mass on a spring with a stiffness of 5 kN/m has a viscous damper giving a damping ratio of 0.7. Find the damped natural frequency fd of its free vibration in Hz.

m = 10 kgk = 5 kN/mζ = 0.7
fd = Hz
12.Mechanical vibrationsHard
k1​ = 5k2​ = 40m = 100 kg

A 100 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 5 kN/m and k₂ = 40 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 5 kN/mk2 = 40 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T2 = 723.7 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 15000/100.5 = 149.2 N·m

Output torque

T2 = 149.2·80/16·0.97 = 723.7 N·m

Answer

T2 = 723.7 N·m
2.Gears & gear trains

Answer: θ = 163.1 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.1469) = 8.446°

Angle of wrap

θ = 180 − 2·8.446 = 163.1°

Answer

θ = 163.1°
3.Torsion of shafts

Answer: φ = 22.8 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·20⁴/32 = 15708 mm⁴

Angle of twist

φ = TL/(GJ) = 200·1000·2500/(80000·15708) = 0.3979 rad
φ = 0.3979·180/π = 22.8°

Answer

φ = 22.8°
4.Torsion of shafts

Answer: φC = 21.98 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Internal torques

Sense of TC taken as positive.

TBC = TC = 2000 N·m
TAB = TC − TB = 2000 − 200 = 1800 N·m

Twist of each segment

J = π·40⁴/32 = 251327 mm⁴
G = 39 GPa = 39000 MPa
φAB = 1.8 × 10⁶·1200/(39000·251327) = 0.2204 rad
φBC = 2 × 10⁶·800/(39000·251327) = 0.1632 rad

Twist of end C

φC = 0.2204 + 0.1632 = 0.3836 rad → |φC| = 21.98°

Answer

φC = 21.98°
5.Mohr’s circle & stress transformation

Answer: τmax = 41.23 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((110 − 90)/2)² + 40²) = 41.23 MPa

Answer

τmax = 41.23 MPa
6.Mohr’s circle & stress transformation

Answer: n = 2.067

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Yield criteria: von Mises predicts yield when σvM = √(σ₁² − σ₁σ₂ + σ₂²) reaches σY; Tresca when the absolute maximum shear stress reaches σY/2.

σxyCσ1​σ2​

Principal stresses

C = 115 MPa, R = 18.03 MPa
σ1 = 133 MPa, σ2 = 96.97 MPa, σ3 = 0

Tresca

σmax − σmin = 133 MPa
n = 275/133 = 2.067

Answer

n = 2.067

n > 1 means the point does not yield; Tresca is slightly more conservative than von Mises.

7.Axial stress & strain

Answer: δ = 0.2454 mm

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·40²/4 = 1257 mm²
At = π(100² − 70²)/4 = 4006 mm²

Combined axial stiffness

ΣEA = 200·10³·1257 + 100·10³·4006 = 6.519 × 10⁸ N

Shortening

δ = 200000·800/6.519 × 10⁸ = 0.2454 mm

Answer

δ = 0.2454 mm
8.Axial stress & strain

Answer: δ = 6.342 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·40²/4 = 1257 mm², A2 = π·20²/4 = 314.2 mm²
σ1 = 71.62 MPa
σ2 = 286.5 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 71.62·1000/117000 = 0.6121 mm
δ2 = σ2L2/E2 = 286.5·2000/100000 = 5.73 mm
δ = δ1 + δ2 = 6.342 mm

Answer

δ = 6.342 mm
9.Column buckling

Answer: Pcr = 109.9 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Effective length

KL = 2·1000 = 2000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·636173/2000² = 109878 N = 109.9 kN

Answer

Pcr = 109.9 kN
10.Column buckling

Answer: d = 126.1 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2·85000 = 170000 N
KL = 2·6000 = 12000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·170000·12000²/(π³·200000))^(1/4) = 126.1 mm

Answer

d = 126.1 mm

Check: the slenderness KL/r is 380.7, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: fd = 2.542 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(5000/10) = 22.36 rad/s
fn = 22.36/(2π) = 3.559 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 3.559·√(1 − 0.7²) = 2.542 Hz

Answer

fd = 2.542 Hz
12.Mechanical vibrations

Answer: fn = 3.376 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 5 + 40 = 45 kN/m

Natural frequency

ωn = √(45000/100) = 21.21 rad/s
fn = 21.21/(2π) = 3.376 Hz

Answer

fn = 3.376 Hz

ExamProblems · examproblems.com/courses/machine-design