Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = ?N2​

Two parallel shafts are 81 mm apart. They must be connected by a pair of spur gears with a module of 2 mm and a speed reduction of 3.5 : 1. How many teeth N1 must the pinion have?

a = 81 mmm = 2 mmi = 3.5
N1 =
2.Gears & gear trainsHard
A = 24B = 36C = 25D = 30

A 3 kW motor at 1440 rpm drives gear A (24 teeth), which meshes with gear B (36 teeth). Gear C (25 teeth) on the same shaft as B drives gear D (30 teeth) on the output shaft. Each gear mesh has an efficiency of 96%. Find the output torque Tout.

P = 3 kWnin = 1440 rpmA = 24B = 36C = 25D = 30ηmesh = 96%
Tout = N·m
3.Torsion of shaftsMedium
T = 250 N·md = 50 mmL = 3 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 250 N·md = 50 mmL = 3 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
d = 20 mmTB​ = 100 N·mTC​ = 250 N·mABC1.2 m0.5 m

A solid brass shaft of diameter 20 mm is fixed at A. A torque of 100 N·m acts at B, 1.2 m from A, and a torque of 250 N·m in the opposite direction acts at the free end C, a further 0.5 m along. Find the maximum shear stress τmax in the shaft.

d = 20 mmTB = 100 N·mTC = 250 N·mAB = 1.2 mBC = 0.5 m
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = 20σy​ = 100τxy​ = 30MPa

A point in a loaded part has σₓ = 20 MPa, σᵧ = 100 MPa and τₓᵧ = 30 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = 20 MPaσy = 100 MPaτxy = 30 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 20σy​ = 80τxy​ = −20MPa

A point in a loaded part has σₓ = 20 MPa, σᵧ = 80 MPa and τₓᵧ = −20 MPa (tension positive). Find the shear stress τθ on a plane whose normal is rotated 60° counter-clockwise from the x-axis (positive in the same sense as τₓᵧ).

σx = 20 MPaσy = 80 MPaτxy = −20 MPaθ = 60°
τθ = MPa
7.Axial stress & strainMedium
P = ?12300 mm500 mmØ25Ø40δ = 0.25 mm

A bar is made of a steel segment (diameter 25 mm, length 300 mm, E = 200 GPa) joined end to end with a segment made of brass (diameter 40 mm, length 500 mm, E = 100 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.25 mm in total.

segment 1: steel, Ø25 mm, 300 mm, E = 200 GPasegment 2: brass, Ø40 mm, 500 mm, E = 100 GPaδ = 0.25 mm
P = kN
8.Axial stress & strainHard
P = ?Ø3070 GPaØ120/70800 mm

A steel rod (diameter 30 mm, E = 200 GPa, allowable stress 150 MPa) sits inside a tube made of aluminium (outer diameter 120 mm, inner diameter 70 mm, E = 70 GPa, allowable stress 70 MPa). They are compressed together between rigid plates. Find the largest load Pmax.

rod: Ø30 mm, E = 200 GPa, σallow = 150 MPatube: Ø120/Ø70 mm, E = 70 GPa, σallow = 70 MPa
Pmax = kN
9.Column bucklingMedium
PL = 4 m20 × 100 mmcross-section

A column of length L made of aluminium is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 4 mE = 70 GPa (aluminium)b × h = 20 × 100 mm
Pcr = kN
10.Column bucklingHard
P = 140 kNL = 3 md = ?cross-section

A solid round column of length L made of aluminium is pinned at both ends. It must carry 140 kN with a factor of safety of 2 against buckling. Find the smallest diameter d.

P = 140 kNn = 2L = 3 mE = 70 GPa (aluminium)
d = mm
11.Mechanical vibrationsMedium
k = 40 kN/mc = 1260 N·s/mm = 250 kg

A 250 kg mass is supported by a spring with a stiffness of 40 kN/m and a viscous damper with a damping coefficient of 1260 N·s/m. Find the damping ratio ζ.

m = 250 kgk = 40 kN/mc = 1260 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 25k2​ = 12m = 40 kg

A 40 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 25 kN/m and the lower one k₂ = 12 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 25 kN/mk2 = 12 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: N1 = 18

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·81/2 = 81

Split by the ratio

N1 = 81/(1 + 3.5) = 18

Answer

N1 = 18
2.Gears & gear trains

Answer: Tout = 33 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1440·(24/36)·(25/30) = 800 rpm
ωout = 2π·800/60 = 83.78 rad/s

Output power and torque

Pout = 3000·0.96² = 2765 W
Tout = Pout/ωout = 2765/83.78 = 33 N·m

Answer

Tout = 33 N·m
3.Torsion of shafts

Answer: φ = 0.8754 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·50⁴/32 = 613592 mm⁴

Angle of twist

φ = TL/(GJ) = 250·1000·3000/(80000·613592) = 0.01528 rad
φ = 0.01528·180/π = 0.8754°

Answer

φ = 0.8754°
4.Torsion of shafts

Answer: τmax = 159.2 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Internal torques

Sense of TC taken as positive.

TBC = TC = 250 N·m
TAB = TC − TB = 250 − 100 = 150 N·m

Maximum shear stress

The segment with the largest internal torque has the largest stress (same diameter).

|T|max = 250 N·m
τmax = 16·250000/(π·20³) = 159.2 MPa

Answer

τmax = 159.2 MPa
5.Mohr’s circle & stress transformation

Answer: τmax = 50 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((20 − 100)/2)² + 30²) = 50 MPa

Answer

τmax = 50 MPa
6.Mohr’s circle & stress transformation

Answer: τθ = 35.98 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

τθ = −−30·0.866 + −20·−0.5 = 35.98 MPa

Answer

τθ = 35.98 MPa
7.Axial stress & strain

Answer: P = 35.54 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 490.9 mm², A₂ = 1257 mm²

Flexibilities

L₁/(E₁A₁) = 300/(200000·490.9) = 3.056 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 500/(100000·1257) = 3.979 × 10⁻⁶ mm/N

Load

P = 0.25/7.035 × 10⁻⁶ = 35538 N = 35.54 kN

Answer

P = 35.54 kN
8.Axial stress & strain

Answer: Pmax = 497.7 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·30²/4 = 706.9 mm²
At = π(120² − 70²)/4 = 7461 mm²

Combined axial stiffness

ΣEA = 200·10³·706.9 + 70·10³·7461 = 6.637 × 10⁸ N

Governing strain

ε = min(0.00075, 0.001) = 0.00075 (steel)

Largest load

Pmax = 0.00075·6.637 × 10⁸ = 497746 N = 497.7 kN

Answer

Pmax = 497.7 kN
9.Column buckling

Answer: Pcr = 5.875 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 100·20³/12 = 66667 mm⁴

Effective length

KL = 0.7·4000 = 2800 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·66667/2800² = 5875 N = 5.875 kN

Answer

Pcr = 5.875 kN
10.Column buckling

Answer: d = 92.84 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2·140000 = 280000 N
KL = 1·3000 = 3000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·280000·3000²/(π³·70000))^(1/4) = 92.84 mm

Answer

d = 92.84 mm

Check: the slenderness KL/r is 129.2, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.1992

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(40000·250) = 6325 N·s/m

Damping ratio

ζ = c/cc = 1260/6325 = 0.1992

Answer

ζ = 0.1992

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: fn = 2.266 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/25 + 1/12 → keq = 25·12/(25 + 12) = 8.108 kN/m

Natural frequency

ωn = √(8108/40) = 14.24 rad/s
fn = 14.24/(2π) = 2.266 Hz

Answer

fn = 2.266 Hz

ExamProblems · examproblems.com/courses/machine-design