Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 30, m = 4 mm

A 3 kW motor running at 1450 rpm drives a pinion with 30 teeth and a module of 4 mm. Find the tangential force Ft on the pinion teeth.

P = 3 kWn = 1450 rpmN1 = 30m = 4 mm
Ft = N
2.Gears & gear trainsHard
A = 18B = 36C = 32D = 60

In a compound gear train, gear A (18 teeth) on the input shaft turning at 1440 rpm drives gear B (36 teeth). Gear C (32 teeth) is fixed to the same shaft as B and drives gear D (60 teeth) on the output shaft. Find the output speed nout.

nin = 1440 rpmA = 18B = 36C = 32D = 60
nout = rpm
3.Torsion of shaftsMedium
T = 200 N·md = 40 mmL = 2 mφ = ?

A solid brass shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 200 N·md = 40 mmL = 2 mG = 39 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 5 kW at 1450 rpm without the shear stress exceeding 40 MPa. Find the smallest diameter d that works.

P = 5 kWN = 1450 rpmτallow = 40 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 60σy​ = 110τxy​ = −20MPa

A point in a loaded part has σₓ = 60 MPa, σᵧ = 110 MPa and τₓᵧ = −20 MPa (tension positive). Find the angle θp from the x-axis to the direction of the largest principal stress, between −90° and 90°.

σx = 60 MPaσy = 110 MPaτxy = −20 MPa
θp = °
6.Mohr’s circle & stress transformationHard
σx​τxy​surface of the shaft

A solid shaft of diameter 25 mm carries an axial compressive force of 30 kN together with a torque of 100 N·m. At the surface of the shaft, find the largest principal stress σ1.

d = 25 mmF = −30 kNT = 100 N·m
σ1 = MPa
7.Axial stress & strainMedium
P = ?12400 mm500 mmØ40Ø50δ = 0.2 mm

A bar is made of a steel segment (diameter 40 mm, length 400 mm, E = 200 GPa) joined end to end with a segment made of aluminium (diameter 50 mm, length 500 mm, E = 70 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.2 mm in total.

segment 1: steel, Ø40 mm, 400 mm, E = 200 GPasegment 2: aluminium, Ø50 mm, 500 mm, E = 70 GPaδ = 0.2 mm
P = kN
8.Axial stress & strainHard
Ø 35 mmAluminium1.5 mØ 16 mmAluminium1 mP = 60 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 60 kNsegment 1: Ø35 mm, 1.5 m, aluminium (E = 70 GPa)segment 2: Ø16 mm, 1 m, aluminium (E = 70 GPa)
δ = mm
9.Column bucklingMedium
PL = 2.5 m20 × 80 mmcross-section

A column of length L made of steel is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 2.5 mE = 200 GPa (steel)b × h = 20 × 80 mm
Pcr = kN
10.Column bucklingHard
PL = 6 md = 60 mmcross-section

A column of length L made of steel is fixed at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 6 mE = 200 GPa (steel)d = 60 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 150 kN/mc = 1420 N·s/mm = 150 kg

A 150 kg mass is supported by a spring with a stiffness of 150 kN/m and a viscous damper with a damping coefficient of 1420 N·s/m. Find the damping ratio ζ.

m = 150 kgk = 150 kN/mc = 1420 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 60k2​ = 40k3​ = 40m = 40 kg

A 40 kg mass hangs from spring k₃ = 40 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 60 kN/m and k₂ = 40 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 60 kN/mk2 = 40 kN/mk3 = 40 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: Ft = 329.3 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·1450/60 = 151.8 rad/s
T = P/ω = 3000/151.8 = 19.76 N·m

Pitch diameter

d = m·N = 4·30 = 120 mm

Tangential force

Ft = 2T/d = 2·19.76/0.12 = 329.3 N

Answer

Ft = 329.3 N
2.Gears & gear trains

Answer: nout = 384 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1440·18/36 = 720 rpm = nC

Second stage

nout = 720·32/60 = 384 rpm

Answer

nout = 384 rpm

total ratio = 3.75 : 1

3.Torsion of shafts

Answer: φ = 2.338 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·40⁴/32 = 251327 mm⁴

Angle of twist

φ = TL/(GJ) = 200·1000·2000/(39000·251327) = 0.04081 rad
φ = 0.04081·180/π = 2.338°

Answer

φ = 2.338°
4.Torsion of shafts

Answer: d = 16.12 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1450/60 = 151.8 rad/s
T = P/ω = 5000/151.8 = 32.93 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·32929/(π·40)) = 16.12 mm

Answer

d = 16.12 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: θp = −70.67 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

σxyCσ1​σ2​

Angle on the circle

Point x sits at an angle 2θp from the σ-axis on Mohr’s circle; the quadrant follows from the signs of σₓ − σᵧ and τₓᵧ.

2θp = atan2(2·−20, 60 − 110) = −141.3°

Angle on the element

θp = −70.67°

Answer

θp = −70.67°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: σ1 = 14.12 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Stresses at the surface

σ = F/A = −30000/(π·25²/4) = −30000/490.9 = −61.12 MPa
τ = 16T/(πd³) = 16·100000/(π·25³) = 32.59 MPa
στxyCσ1​σ2​

Mohr’s circle

C = σ/2 = −30.56 MPa
R = √((−30.56)² + 32.59²) = 44.68 MPa
σ1 = C + R = 14.12 MPa
σ2 = C − R = −75.24 MPa

Answer

σ1 = 14.12 MPa
7.Axial stress & strain

Answer: P = 38.25 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 1257 mm², A₂ = 1963 mm²

Flexibilities

L₁/(E₁A₁) = 400/(200000·1257) = 1.592 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 500/(70000·1963) = 3.638 × 10⁻⁶ mm/N

Load

P = 0.2/5.229 × 10⁻⁶ = 38245 N = 38.25 kN

Answer

P = 38.25 kN
8.Axial stress & strain

Answer: δ = 5.599 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·35²/4 = 962.1 mm², A2 = π·16²/4 = 201.1 mm²
σ1 = 62.36 MPa
σ2 = 298.4 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 62.36·1500/70000 = 1.336 mm
δ2 = σ2L2/E2 = 298.4·1000/70000 = 4.263 mm
δ = δ1 + δ2 = 5.599 mm

Answer

δ = 5.599 mm
9.Column buckling

Answer: Pcr = 34.38 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 80·20³/12 = 53333 mm⁴

Effective length

KL = 0.7·2500 = 1750 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·53333/1750² = 34376 N = 34.38 kN

Answer

Pcr = 34.38 kN
10.Column buckling

Answer: σcr = 49.35 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Radius of gyration and slenderness

A = 2827 mm²
r = √(I/A) = √(636173/2827) = 15 mm
KL = 0.5·6000 = 3000 mm
KL/r = 3000/15 = 200

Critical stress

σcr = π²E/(KL/r)² = π²·200000/200² = 49.35 MPa

Answer

σcr = 49.35 MPa
11.Mechanical vibrations

Answer: ζ = 0.1497

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(150000·150) = 9487 N·s/m

Damping ratio

ζ = c/cc = 1420/9487 = 0.1497

Answer

ζ = 0.1497

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: fn = 4.254 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 60 + 40 = 100 kN/m
keq = 100·40/(100 + 40) = 28.57 kN/m

Natural frequency

ωn = √(28571/40) = 26.73 rad/s
fn = 26.73/(2π) = 4.254 Hz

Answer

fn = 4.254 Hz

ExamProblems · examproblems.com/courses/machine-design