Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
d1​ = 125 mmd2​ = 300 mm1500 rpmn2​ = ?

A 125 mm pulley at 1500 rpm drives a 300 mm pulley by a belt with 2 % slip. Find the speed n2 of the driven pulley.

n1 = 1500 rpmd1 = 125 mmd2 = 300 mms = 2 %
n2 = rpm
2.Gears & gear trainsHard
A = 15B = 32C = 18D = 50

In a compound gear train, gear A (15 teeth) on the input shaft turning at 1450 rpm drives gear B (32 teeth). Gear C (18 teeth) is fixed to the same shaft as B and drives gear D (50 teeth) on the output shaft. Find the output speed nout.

nin = 1450 rpmA = 15B = 32C = 18D = 50
nout = rpm
3.Torsion of shaftsMedium
T = 250 N·md = 30 mmL = 1.2 mφ = ?

A solid brass shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 250 N·md = 30 mmL = 1.2 mG = 39 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 15 kW at 750 rpm without the shear stress exceeding 60 MPa. Find the smallest diameter d that works.

P = 15 kWN = 750 rpmτallow = 60 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 110σy​ = 110τxy​ = −30MPa

A point in a thin plate is in plane stress: σₓ = 110 MPa, σᵧ = 110 MPa and τₓᵧ = −30 MPa, with σz = 0. Find the absolute maximum shear stress τabs at the point (considering all planes in three dimensions).

σx = 110 MPaσy = 110 MPaτxy = −30 MPaσz = 0
τabs = MPa
6.Mohr’s circle & stress transformationHard
40°D = 1500 mm, t = 5 mm, p = 1 MPap

A thin-walled cylindrical tank of inner diameter 1500 mm and wall thickness 5 mm holds gas at a gauge pressure of 1 MPa. It is made from plate welded along a helical seam at 40° to the axis of the cylinder. Find the magnitude of the shear stress |τn| acting along the weld seam.

D = 1500 mmt = 5 mmp = 1 MPaα = 40°
|τn| = MPa
7.Axial stress & strainMedium
P = ?12400 mm300 mmØ20Ø60δ = 0.4 mm

A bar is made of a steel segment (diameter 20 mm, length 400 mm, E = 200 GPa) joined end to end with a segment made of copper (diameter 60 mm, length 300 mm, E = 120 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.4 mm in total.

segment 1: steel, Ø20 mm, 400 mm, E = 200 GPasegment 2: copper, Ø60 mm, 300 mm, E = 120 GPaδ = 0.4 mm
P = kN
8.Axial stress & strainHard
80 kN12500 mm200 mmØ30Ø60σ2​ = ?

A steel segment (diameter 30 mm, length 500 mm, E = 200 GPa) and a segment made of aluminium (diameter 60 mm, length 200 mm, E = 70 GPa) are joined end to end and fixed between two rigid walls. An axial load of 80 kN acts at the joint, towards segment 2. Find the magnitude of the stress σ2 in segment 2.

segment 1: steel, Ø30 mm, 500 mm, E = 200 GPasegment 2: aluminium, Ø60 mm, 200 mm, E = 70 GPaP = 80 kN
σ2 = MPa
9.Column bucklingMedium
PL = 5 m50 × 80 mmcross-section

A column of length L made of steel is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 5 mE = 200 GPa (steel)b × h = 50 × 80 mm
Pcr = kN
10.Column bucklingHard
PL = 5 md = 80 mmcross-section

A column of length L made of steel is fixed at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 5 mE = 200 GPa (steel)d = 80 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 80 kN/mζ = 0.4m = 20 kg

A 20 kg mass on a spring with a stiffness of 80 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 20 kgk = 80 kN/mζ = 0.4
fd = Hz
12.Mechanical vibrationsHard
k1​ = 100k2​ = 80m = 25 kg

A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 100 kN/m and k₂ = 80 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 100 kN/mk2 = 80 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: n2 = 612.5 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1500·125/300 = 625 rpm

With slip

n2 = 625·0.98 = 612.5 rpm

Answer

n2 = 612.5 rpm
2.Gears & gear trains

Answer: nout = 244.7 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1450·15/32 = 679.7 rpm = nC

Second stage

nout = 679.7·18/50 = 244.7 rpm

Answer

nout = 244.7 rpm

total ratio = 5.926 : 1

3.Torsion of shafts

Answer: φ = 5.542 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·30⁴/32 = 79522 mm⁴

Angle of twist

φ = TL/(GJ) = 250·1000·1200/(39000·79522) = 0.09673 rad
φ = 0.09673·180/π = 5.542°

Answer

φ = 5.542°
4.Torsion of shafts

Answer: d = 25.31 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·750/60 = 78.54 rad/s
T = P/ω = 15000/78.54 = 191 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·190986/(π·60)) = 25.31 mm

Answer

d = 25.31 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: τabs = 70 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. In three dimensions the absolute maximum shear stress is (σmax − σmin)/2 over all three principal stresses; in plane stress the third one is zero.

σxyCσ1​σ2​

In-plane principal stresses

C = 110 MPa, R = √(0² + (−30)²) = 30 MPa
σ1 = 140 MPa, σ2 = 80 MPa, σz = 0

Largest of the three circles

τ = max(|σ1 − σ2|, |σ1|, |σ2|)/2 = max(60, 140, 80)/2 = 70 MPa

Answer

τabs = 70 MPa

Here the out-of-plane circle governs: the absolute maximum is larger than the in-plane maximum R.

6.Mohr’s circle & stress transformation

Answer: |τn| = 36.93 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Thin-walled cylinder: hoop stress σh = pr/t and axial stress σa = pr/(2t); these are the principal stresses in the wall.

Wall stresses

r = 1500/2 = 750 mm
σh = pr/t = 1·750/5 = 150 MPa
σa = pr/(2t) = 75 MPa

Transform to the seam

Take x along the axis (σa) and y around the hoop (σh). The seam’s normal makes 90° − α with the axis.

|τn| = (150 − 75)·sin 40°·cos 40° = 36.93 MPa

Answer

|τn| = 36.93 MPa
7.Axial stress & strain

Answer: P = 55.17 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 314.2 mm², A₂ = 2827 mm²

Flexibilities

L₁/(E₁A₁) = 400/(200000·314.2) = 6.366 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 300/(120000·2827) = 8.842 × 10⁻⁷ mm/N

Load

P = 0.4/7.25 × 10⁻⁶ = 55169 N = 55.17 kN

Answer

P = 55.17 kN
8.Axial stress & strain

Answer: σ2 = 22.01 MPa

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Stiffnesses

k₁ = 200000·706.9/500 = 282743 N/mm
k₂ = 70000·2827/200 = 989602 N/mm

Share of segment 2

F2 = 80000·989602/1.272 × 10⁶ = 62222 N

Stress

σ2 = 62222/2827 = 22.01 MPa (compression)

Answer

σ2 = 22.01 MPa
9.Column buckling

Answer: Pcr = 16.45 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 80·50³/12 = 833333 mm⁴

Effective length

KL = 2·5000 = 10000 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·833333/10000² = 16449 N = 16.45 kN

Answer

Pcr = 16.45 kN
10.Column buckling

Answer: σcr = 126.3 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·80⁴/64 = 2.011 × 10⁶ mm⁴

Radius of gyration and slenderness

A = 5027 mm²
r = √(I/A) = √(2.011 × 10⁶/5027) = 20 mm
KL = 0.5·5000 = 2500 mm
KL/r = 2500/20 = 125

Critical stress

σcr = π²E/(KL/r)² = π²·200000/125² = 126.3 MPa

Answer

σcr = 126.3 MPa
11.Mechanical vibrations

Answer: fd = 9.225 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(80000/20) = 63.25 rad/s
fn = 63.25/(2π) = 10.07 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 10.07·√(1 − 0.4²) = 9.225 Hz

Answer

fd = 9.225 Hz
12.Mechanical vibrations

Answer: fn = 13.5 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 100 + 80 = 180 kN/m

Natural frequency

ωn = √(180000/25) = 84.85 rad/s
fn = 84.85/(2π) = 13.5 Hz

Answer

fn = 13.5 Hz

ExamProblems · examproblems.com/courses/machine-design