Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
Nw​ = 36z = 4, 960 rpm

A worm with 4 start(s) turns at 960 rpm and drives a worm wheel with 36 teeth. Find the speed nw of the wheel.

z = 4Nw = 36n = 960 rpm
nw = rpm
2.Gears & gear trainsHard
d1​ = 150 mmd2​ = 300 mm1500 rpmC = 1200 mmT1​ = 2000 NT2​P = ?

An open belt connects a 150 mm driving pulley at 1500 rpm to a 300 mm pulley; the centres are 1200 mm apart. The coefficient of friction is 0.35 and the tight-side tension may not exceed 2000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 150 mmn1 = 1500 rpmd2 = 300 mmC = 1200 mmμ = 0.35T1 = 2000 N
P = kW
3.Torsion of shaftsMedium
T = 1000 N·md = 40 mmL = 0.5 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 1000 N·md = 40 mmL = 0.5 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 20 kW at 300 rpm without the shear stress exceeding 80 MPa. Find the smallest diameter d that works.

P = 20 kWN = 300 rpmτallow = 80 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 50σy​ = −10MPaτxy​ = ?

A point has σₓ = 50 MPa and σᵧ = −10 MPa. How large can the shear stress τxy (magnitude) become before the largest principal stress reaches 90 MPa?

σx = 50 MPaσy = −10 MPaσ1 = 90 MPa
τxy = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 150σy​ = 110τxy​ = 10MPa

A point in a loaded part has σₓ = 150 MPa, σᵧ = 110 MPa and τₓᵧ = 10 MPa (tension positive). Find the normal stress σθ on a plane whose normal is rotated 45° clockwise from the x-axis.

σx = 150 MPaσy = 110 MPaτxy = 10 MPaθ = -45°
σθ = MPa
7.Axial stress & strainMedium
200 kNØ4070 GPaØ80/50800 mmδ = ?

A steel rod (diameter 40 mm, E = 200 GPa) sits inside a tube made of aluminium (outer diameter 80 mm, inner diameter 50 mm, E = 70 GPa). Both are 800 mm long and are compressed together between rigid plates by 200 kN. Find the shortening δ.

P = 200 kNrod: Ø40 mm, E = 200 GPatube: Ø80/Ø50 mm, E = 70 GPaL = 800 mm
δ = mm
8.Axial stress & strainHard
P = ?Ø20120 GPaØ80/60300 mm

A steel rod (diameter 20 mm, E = 200 GPa, allowable stress 160 MPa) sits inside a tube made of copper (outer diameter 80 mm, inner diameter 60 mm, E = 120 GPa, allowable stress 80 MPa). They are compressed together between rigid plates. Find the largest load Pmax.

rod: Ø20 mm, E = 200 GPa, σallow = 160 MPatube: Ø80/Ø60 mm, E = 120 GPa, σallow = 80 MPa
Pmax = kN
9.Column bucklingMedium
PL = 6 m25 × 50 mmcross-section

A column of length L made of steel is pinned at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 6 mE = 200 GPa (steel)b × h = 25 × 50 mm
Pcr = kN
10.Column bucklingHard
PL = 4 md = 50 mmcross-section

A column of length L made of aluminium is pinned at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 4 mE = 70 GPa (aluminium)d = 50 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 80 kN/mc = 180 N·s/mm = 40 kg

A 40 kg mass is supported by a spring with a stiffness of 80 kN/m and a viscous damper with a damping coefficient of 180 N·s/m. Find the damping ratio ζ.

m = 40 kgk = 80 kN/mc = 180 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 40k2​ = 50k3​ = 80m = 40 kg

A 40 kg mass hangs from spring k₃ = 80 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 50 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 40 kN/mk2 = 50 kN/mk3 = 80 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: nw = 106.7 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 960·4/36 = 106.7 rpm

Answer

nw = 106.7 rpm
2.Gears & gear trains

Answer: P = 15.36 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 3.017 rad

Slack-side tension

eμθ = e1.056 = 2.874, T₂ = 2000/2.874 = 695.8 N

Power

P = (2000 − 695.8)·11.78 = 15.36 kW

Answer

P = 15.36 kW
3.Torsion of shafts

Answer: φ = 1.425 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·40⁴/32 = 251327 mm⁴

Angle of twist

φ = TL/(GJ) = 1000·1000·500/(80000·251327) = 0.02487 rad
φ = 0.02487·180/π = 1.425°

Answer

φ = 1.425°
4.Torsion of shafts

Answer: d = 34.35 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·300/60 = 31.42 rad/s
T = P/ω = 20000/31.42 = 636.6 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·636620/(π·80)) = 34.35 mm

Answer

d = 34.35 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: τxy = 63.25 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Required radius

C = (50 + (−10))/2 = 20 MPa
R = σ1 − C = 90 − 20 = 70 MPa
στxyCσ1​σ2​

Shear stress

τxy = √(R² − ((σₓ − σᵧ)/2)²) = √(70² − 30²) = 63.25 MPa

Answer

τxy = 63.25 MPa
6.Mohr’s circle & stress transformation

Answer: σθ = 120 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

σθ = 130 + 20·0 + 10·−1 = 120 MPa

Answer

σθ = 120 MPa
7.Axial stress & strain

Answer: δ = 0.3435 mm

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·40²/4 = 1257 mm²
At = π(80² − 50²)/4 = 3063 mm²

Combined axial stiffness

ΣEA = 200·10³·1257 + 70·10³·3063 = 4.657 × 10⁸ N

Shortening

δ = 200000·800/4.657 × 10⁸ = 0.3435 mm

Answer

δ = 0.3435 mm
8.Axial stress & strain

Answer: Pmax = 217.8 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·20²/4 = 314.2 mm²
At = π(80² − 60²)/4 = 2199 mm²

Combined axial stiffness

ΣEA = 200·10³·314.2 + 120·10³·2199 = 3.267 × 10⁸ N

Governing strain

ε = min(0.0008, 0.0006667) = 0.0006667 (copper)

Largest load

Pmax = 0.0006667·3.267 × 10⁸ = 217817 N = 217.8 kN

Answer

Pmax = 217.8 kN
9.Column buckling

Answer: Pcr = 3.57 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 50·25³/12 = 65104 mm⁴

Effective length

KL = 1·6000 = 6000 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·65104/6000² = 3570 N = 3.57 kN

Answer

Pcr = 3.57 kN
10.Column buckling

Answer: σcr = 6.747 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·50⁴/64 = 306796 mm⁴

Radius of gyration and slenderness

A = 1963 mm²
r = √(I/A) = √(306796/1963) = 12.5 mm
KL = 1·4000 = 4000 mm
KL/r = 4000/12.5 = 320

Critical stress

σcr = π²E/(KL/r)² = π²·70000/320² = 6.747 MPa

Answer

σcr = 6.747 MPa
11.Mechanical vibrations

Answer: ζ = 0.05031

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(80000·40) = 3578 N·s/m

Damping ratio

ζ = c/cc = 180/3578 = 0.05031

Answer

ζ = 0.05031

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: fn = 5.179 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 40 + 50 = 90 kN/m
keq = 90·80/(90 + 80) = 42.35 kN/m

Natural frequency

ωn = √(42353/40) = 32.54 rad/s
fn = 32.54/(2π) = 5.179 Hz

Answer

fn = 5.179 Hz

ExamProblems · examproblems.com/courses/machine-design