Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 30, m = 4 mm

A 5.5 kW motor running at 1440 rpm drives a pinion with 30 teeth and a module of 4 mm. Find the tangential force Ft on the pinion teeth.

P = 5.5 kWn = 1440 rpmN1 = 30m = 4 mm
Ft = N
2.Gears & gear trainsHard
d1​ = 100 mmd2​ = 300 mm1440 rpmC = 600 mmT1​ = 800 NT2​P = ?

An open belt connects a 100 mm driving pulley at 1440 rpm to a 300 mm pulley; the centres are 600 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 800 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 100 mmn1 = 1440 rpmd2 = 300 mmC = 600 mmμ = 0.25T1 = 800 N
P = kW
3.Torsion of shaftsMedium
do​ = 75, di​ = 38 mmT = 500 N·mL = 3 m

A hollow steel shaft (outer diameter 75 mm, inner diameter 38 mm, length 3 m) is fixed at one end and twisted by a torque of 500 N·m at the other. Find the angle of twist φ in degrees.

T = 500 N·mdo = 75 mmdi = 38 mmL = 3 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 30 kW at 1800 rpm without the shear stress exceeding 60 MPa. Find the smallest diameter d that works.

P = 30 kWN = 1800 rpmτallow = 60 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 90σy​ = −60MPaτxy​ = ?

A point has σₓ = 90 MPa and σᵧ = −60 MPa. How large can the shear stress τxy (magnitude) become before the largest principal stress reaches 110 MPa?

σx = 90 MPaσy = −60 MPaσ1 = 110 MPa
τxy = MPa
6.Mohr’s circle & stress transformationHard
60°D = 500 mm, t = 10 mm, p = 1 MPap

A thin-walled cylindrical tank of inner diameter 500 mm and wall thickness 10 mm holds gas at a gauge pressure of 1 MPa. It is made from plate welded along a helical seam at 60° to the axis of the cylinder. Find the magnitude of the shear stress |τn| acting along the weld seam.

D = 500 mmt = 10 mmp = 1 MPaα = 60°
|τn| = MPa
7.Axial stress & strainMedium
150 kNØ4070 GPaØ80/50800 mmδ = ?

A steel rod (diameter 40 mm, E = 200 GPa) sits inside a tube made of aluminium (outer diameter 80 mm, inner diameter 50 mm, E = 70 GPa). Both are 800 mm long and are compressed together between rigid plates by 150 kN. Find the shortening δ.

P = 150 kNrod: Ø40 mm, E = 200 GPatube: Ø80/Ø50 mm, E = 70 GPaL = 800 mm
δ = mm
8.Axial stress & strainHard
20 kN12300 mm400 mmØ30Ø50σ2​ = ?

A steel segment (diameter 30 mm, length 300 mm, E = 200 GPa) and a segment made of copper (diameter 50 mm, length 400 mm, E = 120 GPa) are joined end to end and fixed between two rigid walls. An axial load of 20 kN acts at the joint, towards segment 2. Find the magnitude of the stress σ2 in segment 2.

segment 1: steel, Ø30 mm, 300 mm, E = 200 GPasegment 2: copper, Ø50 mm, 400 mm, E = 120 GPaP = 20 kN
σ2 = MPa
9.Column bucklingMedium
PL = 2 md = 50 mmcross-section

A column of length L made of aluminium is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 2 mE = 70 GPa (aluminium)d = 50 mm
Pcr = kN
10.Column bucklingHard
PL = 3 md = 50 mmcross-section

A column of length L made of aluminium is fixed at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 3 mE = 70 GPa (aluminium)d = 50 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 150 kN/mζ = 0.5m = 8 kg

An 8 kg mass on a spring with a stiffness of 150 kN/m has a viscous damper giving a damping ratio of 0.5. Find the damped natural frequency fd of its free vibration in Hz.

m = 8 kgk = 150 kN/mζ = 0.5
fd = Hz
12.Mechanical vibrationsHard
k1​ = 25k2​ = 10k3​ = 80m = 50 kg

A 50 kg mass hangs from spring k₃ = 80 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 25 kN/m and k₂ = 10 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 25 kN/mk2 = 10 kN/mk3 = 80 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: Ft = 607.9 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·1440/60 = 150.8 rad/s
T = P/ω = 5500/150.8 = 36.47 N·m

Pitch diameter

d = m·N = 4·30 = 120 mm

Tangential force

Ft = 2T/d = 2·36.47/0.12 = 607.9 N

Answer

Ft = 607.9 N
2.Gears & gear trains

Answer: P = 3.042 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.807 rad

Slack-side tension

eμθ = e0.7017 = 2.017, T₂ = 800/2.017 = 396.6 N

Power

P = (800 − 396.6)·7.54 = 3.042 kW

Answer

P = 3.042 kW
3.Torsion of shafts

Answer: φ = 0.3702 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π(75⁴ − 38⁴)/32 = 2.902 × 10⁶ mm⁴

Angle of twist

T = 500 N·m = 500000 N·mm
L = 3 m = 3000 mm
G = 80 GPa = 80000 MPa
φ = TL/(GJ) = 500000·3000/(80000·2.902 × 10⁶) = 0.006462 rad
φ = 0.006462·180/π = 0.3702°

Answer

φ = 0.3702°
4.Torsion of shafts

Answer: d = 23.82 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1800/60 = 188.5 rad/s
T = P/ω = 30000/188.5 = 159.2 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·159155/(π·60)) = 23.82 mm

Answer

d = 23.82 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: τxy = 58.31 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Required radius

C = (90 + (−60))/2 = 15 MPa
R = σ1 − C = 110 − 15 = 95 MPa
στxyCσ1​σ2​

Shear stress

τxy = √(R² − ((σₓ − σᵧ)/2)²) = √(95² − 75²) = 58.31 MPa

Answer

τxy = 58.31 MPa
6.Mohr’s circle & stress transformation

Answer: |τn| = 5.413 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Thin-walled cylinder: hoop stress σh = pr/t and axial stress σa = pr/(2t); these are the principal stresses in the wall.

Wall stresses

r = 500/2 = 250 mm
σh = pr/t = 1·250/10 = 25 MPa
σa = pr/(2t) = 12.5 MPa

Transform to the seam

Take x along the axis (σa) and y around the hoop (σh). The seam’s normal makes 90° − α with the axis.

|τn| = (25 − 12.5)·sin 60°·cos 60° = 5.413 MPa

Answer

|τn| = 5.413 MPa
7.Axial stress & strain

Answer: δ = 0.2577 mm

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·40²/4 = 1257 mm²
At = π(80² − 50²)/4 = 3063 mm²

Combined axial stiffness

ΣEA = 200·10³·1257 + 70·10³·3063 = 4.657 × 10⁸ N

Shortening

δ = 150000·800/4.657 × 10⁸ = 0.2577 mm

Answer

δ = 0.2577 mm
8.Axial stress & strain

Answer: σ2 = 5.659 MPa

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Stiffnesses

k₁ = 200000·706.9/300 = 471239 N/mm
k₂ = 120000·1963/400 = 589049 N/mm

Share of segment 2

F2 = 20000·589049/1.06 × 10⁶ = 11111 N

Stress

σ2 = 11111/1963 = 5.659 MPa (compression)

Answer

σ2 = 5.659 MPa
9.Column buckling

Answer: Pcr = 108.1 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·50⁴/64 = 306796 mm⁴

Effective length

KL = 0.7·2000 = 1400 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·306796/1400² = 108141 N = 108.1 kN

Answer

Pcr = 108.1 kN
10.Column buckling

Answer: σcr = 47.98 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·50⁴/64 = 306796 mm⁴

Radius of gyration and slenderness

A = 1963 mm²
r = √(I/A) = √(306796/1963) = 12.5 mm
KL = 0.5·3000 = 1500 mm
KL/r = 1500/12.5 = 120

Critical stress

σcr = π²E/(KL/r)² = π²·70000/120² = 47.98 MPa

Answer

σcr = 47.98 MPa
11.Mechanical vibrations

Answer: fd = 18.87 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(150000/8) = 136.9 rad/s
fn = 136.9/(2π) = 21.79 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 21.79·√(1 − 0.5²) = 18.87 Hz

Answer

fd = 18.87 Hz
12.Mechanical vibrations

Answer: fn = 3.512 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 25 + 10 = 35 kN/m
keq = 35·80/(35 + 80) = 24.35 kN/m

Natural frequency

ωn = √(24348/50) = 22.07 rad/s
fn = 22.07/(2π) = 3.512 Hz

Answer

fn = 3.512 Hz

ExamProblems · examproblems.com/courses/machine-design