Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
d1​ = 200 mmd2​ = 450 mm1440 rpmn2​ = ?

A 200 mm pulley at 1440 rpm drives a 450 mm pulley by a belt with 2 % slip. Find the speed n2 of the driven pulley.

n1 = 1440 rpmd1 = 200 mmd2 = 450 mms = 2 %
n2 = rpm
2.Gears & gear trainsHard
A = 18B = 60C = 18D = 40

In a compound gear train, gear A (18 teeth) on the input shaft turning at 2900 rpm drives gear B (60 teeth). Gear C (18 teeth) is fixed to the same shaft as B and drives gear D (40 teeth) on the output shaft. Find the output speed nout.

nin = 2900 rpmA = 18B = 60C = 18D = 40
nout = rpm
3.Torsion of shaftsMedium
T = 100 N·md = 30 mmL = 2.5 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 100 N·md = 30 mmL = 2.5 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 100 kW at 1000 rpm without the shear stress exceeding 40 MPa. Find the smallest diameter d that works.

P = 100 kWN = 1000 rpmτallow = 40 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 60σy​ = −60τxy​ = 30MPa

A point in a loaded part has σₓ = 60 MPa, σᵧ = −60 MPa and τₓᵧ = 30 MPa (tension positive). Find the angle θp from the x-axis to the direction of the largest principal stress, between −90° and 90°.

σx = 60 MPaσy = −60 MPaτxy = 30 MPa
θp = °
6.Mohr’s circle & stress transformationHard
σx​ = 140σy​ = −30τxy​ = 10MPa

A point in a thin plate is in plane stress: σₓ = 140 MPa, σᵧ = −30 MPa and τₓᵧ = 10 MPa (σz = 0). The material has a yield strength of 300 MPa. Find the factor of safety n against yielding by the von Mises (distortion energy) criterion.

σx = 140 MPaσy = −30 MPaτxy = 10 MPaσY = 300 MPa
n =
7.Axial stress & strainMedium
Ø 10 mmAluminium1 mP = 60 kN

Find the axial strain ε in the aluminium bar, in microstrain (µε = 10⁻⁶).

P = 60 kNd = 10 mmL = 1 mE = 70 GPa
ε = µε
8.Axial stress & strainHard
Ø 25 mmAluminium2 mØ 20 mmAluminium1.5 mP = 20 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the largest normal stress σmax in the bar.

P = 20 kNsegment 1: Ø25 mm, 2 m, aluminium (E = 70 GPa)segment 2: Ø20 mm, 1.5 m, aluminium (E = 70 GPa)
σmax = MPa
9.Column bucklingMedium
PL = 2.5 md = 60 mmcross-section

A column of length L made of steel is pinned at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 2.5 mE = 200 GPa (steel)d = 60 mm
Pcr = kN
10.Column bucklingHard
P = 25 kNL = 5 md = ?cross-section

A solid round column of length L made of steel is fixed at the base and pinned at the top. It must carry 25 kN with a factor of safety of 2 against buckling. Find the smallest diameter d.

P = 25 kNn = 2L = 5 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
k = 8 kN/mζ = 0.4m = 12 kg

A 12 kg mass on a spring with a stiffness of 8 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 12 kgk = 8 kN/mζ = 0.4
fd = Hz
12.Mechanical vibrationsHard
k1​ = 40k2​ = 25k3​ = 80m = 25 kg

A 25 kg mass hangs from spring k₃ = 80 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 25 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 40 kN/mk2 = 25 kN/mk3 = 80 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: n2 = 627.2 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1440·200/450 = 640 rpm

With slip

n2 = 640·0.98 = 627.2 rpm

Answer

n2 = 627.2 rpm
2.Gears & gear trains

Answer: nout = 391.5 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 2900·18/60 = 870 rpm = nC

Second stage

nout = 870·18/40 = 391.5 rpm

Answer

nout = 391.5 rpm

total ratio = 7.407 : 1

3.Torsion of shafts

Answer: φ = 2.252 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·30⁴/32 = 79522 mm⁴

Angle of twist

φ = TL/(GJ) = 100·1000·2500/(80000·79522) = 0.0393 rad
φ = 0.0393·180/π = 2.252°

Answer

φ = 2.252°
4.Torsion of shafts

Answer: d = 49.54 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1000/60 = 104.7 rad/s
T = P/ω = 100000/104.7 = 954.9 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·954930/(π·40)) = 49.54 mm

Answer

d = 49.54 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: θp = 13.28 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCσ1​σ2​

Angle on the circle

Point x sits at an angle 2θp from the σ-axis on Mohr’s circle; the quadrant follows from the signs of σₓ − σᵧ and τₓᵧ.

2θp = atan2(2·30, 60 − −60) = 26.57°

Angle on the element

θp = 13.28°

Answer

θp = 13.28°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: n = 1.897

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Yield criteria: von Mises predicts yield when σvM = √(σ₁² − σ₁σ₂ + σ₂²) reaches σY; Tresca when the absolute maximum shear stress reaches σY/2.

στxyCσ1​σ2​

Principal stresses

C = 55 MPa, R = 85.59 MPa
σ1 = 140.6 MPa, σ2 = −30.59 MPa, σ3 = 0

Von Mises

σvM = √(140.6² − 140.6·(−30.59) + (−30.59)²) = 158.1 MPa
n = 300/158.1 = 1.897

Answer

n = 1.897

n > 1 means the point does not yield; Tresca is slightly more conservative than von Mises.

7.Axial stress & strain

Answer: ε = 10913 µε

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·10²/4 = 78.54 mm²
σ = P/A = 60·1000/78.54 = 763.9 MPa

Strain (Hooke’s law)

E for aluminium = 70 GPa = 70000 MPa.

ε = σ/E = 763.9/70000 = 0.01091 = 10913 µε

Answer

ε = 10913 µε
8.Axial stress & strain

Answer: σmax = 63.66 MPa

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·25²/4 = 490.9 mm², A2 = π·20²/4 = 314.2 mm²
σ1 = 40.74 MPa
σ2 = 63.66 MPa

Largest stress

The thinner segment has the smaller area, so it carries the larger stress.

σmax = 63.66 MPa

Answer

σmax = 63.66 MPa
9.Column buckling

Answer: Pcr = 200.9 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Effective length

KL = 1·2500 = 2500 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·636173/2500² = 200921 N = 200.9 kN

Answer

Pcr = 200.9 kN
10.Column buckling

Answer: d = 50.14 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2·25000 = 50000 N
KL = 0.7·5000 = 3500 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·50000·3500²/(π³·200000))^(1/4) = 50.14 mm

Answer

d = 50.14 mm

Check: the slenderness KL/r is 279.2, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: fd = 3.766 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(8000/12) = 25.82 rad/s
fn = 25.82/(2π) = 4.109 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 4.109·√(1 − 0.4²) = 3.766 Hz

Answer

fd = 3.766 Hz
12.Mechanical vibrations

Answer: fn = 6.028 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 40 + 25 = 65 kN/m
keq = 65·80/(65 + 80) = 35.86 kN/m

Natural frequency

ωn = √(35862/25) = 37.87 rad/s
fn = 37.87/(2π) = 6.028 Hz

Answer

fn = 6.028 Hz

ExamProblems · examproblems.com/courses/machine-design