Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 12N2​ = 25

A 1.5 kW motor running at 1450 rpm drives a pinion with 12 teeth, which meshes with a gear with 25 teeth. Ignore losses. Find the torque T1 on the motor shaft.

P = 1.5 kWn1 = 1450 rpmN1 = 12N2 = 25η = 100%
T1 = N·m
2.Gears & gear trainsHard
A = 32B = 60C = 12D = 36

A 15 kW motor at 1440 rpm drives gear A (32 teeth), which meshes with gear B (60 teeth). Gear C (12 teeth) on the same shaft as B drives gear D (36 teeth) on the output shaft. Each gear mesh has an efficiency of 96%. Find the output torque Tout.

P = 15 kWnin = 1440 rpmA = 32B = 60C = 12D = 36ηmesh = 96%
Tout = N·m
3.Torsion of shaftsMedium
do​ = ?T = 1000 N·m

A hollow shaft must carry a torque of 1000 N·m. Its inner diameter is to be 0.75 times its outer diameter, and the shear stress must not exceed 50 MPa. Find the smallest outer diameter do.

T = 1000 N·mdi/do = 0.75τallow = 50 MPa
do = mm
4.Torsion of shaftsHard
d = ?50 kW, 300 rpm

A solid steel shaft transmits 50 kW at 300 rpm. The shear stress must not exceed 50 MPa and the twist must not exceed 0.5° per m of length. Find the smallest diameter d that satisfies both limits.

P = 50 kWN = 300 rpmτallow = 50 MPaθallow = 0.5°/mG = 80 GPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 50σy​ = 110τxy​ = 60MPa

A point in a loaded part has σₓ = 50 MPa, σᵧ = 110 MPa and τₓᵧ = 60 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = 50 MPaσy = 110 MPaτxy = 60 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​τxy​surface of the shaft

A solid shaft of diameter 25 mm carries an axial tensile force of 130 kN together with a torque of 100 N·m. At the surface of the shaft, find the maximum in-plane shear stress τmax.

d = 25 mmF = 130 kNT = 100 N·m
τmax = MPa
7.Axial stress & strainMedium
Ø 16 mmSteel0.5 mP = 35 kN

Find the axial strain ε in the steel bar, in microstrain (µε = 10⁻⁶).

P = 35 kNd = 16 mmL = 0.5 mE = 200 GPa
ε = µε
8.Axial stress & strainHard
Ø 35 mmAluminium0.5 mØ 20 mmBrass2 mP = 35 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 35 kNsegment 1: Ø35 mm, 0.5 m, aluminium (E = 70 GPa)segment 2: Ø20 mm, 2 m, brass (E = 100 GPa)
δ = mm
9.Column bucklingMedium
PL = 2.5 m25 × 40 mmcross-section

A column of length L made of aluminium is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 2.5 mE = 70 GPa (aluminium)b × h = 25 × 40 mm
Pcr = kN
10.Column bucklingHard
P = 5 kNL = 1 md = ?cross-section

A solid round column of length L made of aluminium is fixed at the base and free at the top. It must carry 5 kN with a factor of safety of 2.5 against buckling. Find the smallest diameter d.

P = 5 kNn = 2.5L = 1 mE = 70 GPa (aluminium)
d = mm
11.Mechanical vibrationsMedium
k = 40 kN/mζ = 0.6m = 80 kg

An 80 kg mass on a spring with a stiffness of 40 kN/m has a viscous damper giving a damping ratio of 0.6. Find the damped natural frequency fd of its free vibration in Hz.

m = 80 kgk = 40 kN/mζ = 0.6
fd = Hz
12.Mechanical vibrationsHard
k1​ = 60k2​ = 25k3​ = 5m = 25 kg

A 25 kg mass hangs from spring k₃ = 5 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 60 kN/m and k₂ = 25 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 60 kN/mk2 = 25 kN/mk3 = 5 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T1 = 9.879 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 1500/151.8 = 9.879 N·m

Answer

T1 = 9.879 N·m
2.Gears & gear trains

Answer: Tout = 515.7 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1440·(32/60)·(12/36) = 256 rpm
ωout = 2π·256/60 = 26.81 rad/s

Output power and torque

Pout = 15000·0.96² = 13824 W
Tout = Pout/ωout = 13824/26.81 = 515.7 N·m

Answer

Tout = 515.7 N·m
3.Torsion of shafts

Answer: do = 53.02 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Outer diameter from the allowable stress

T = 1000 N·m = 1 × 10⁶ N·mm
1 − k⁴ = 1 − 0.75⁴ = 0.6836
do = ∛(16T/(π·τallow·(1 − k⁴))) = ∛(16·1 × 10⁶/(π·50·0.6836)) = 53.02 mm
di = 0.75·53.02 = 39.76 mm

Answer

do = 53.02 mm

A solid shaft would need d = 46.7 mm; the hollow one is a little larger but much lighter.

4.Torsion of shafts

Answer: d = 69.42 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·300/60 = 31.42 rad/s
T = P/ω = 50000/31.42 = 1592 N·m

Diameter for strength

T = 1592 N·m = 1.592 × 10⁶ N·mm
dτ = ∛(16·1.592 × 10⁶/(π·50)) = 54.53 mm

Diameter for stiffness

θ = 0.5·π/180/1000 = 8.727 × 10⁻⁶ rad/mm
G = 80 GPa = 80000 MPa
dφ = (32·1.592 × 10⁶/(π·80000·8.727 × 10⁻⁶))1/4 = 69.42 mm

Governing diameter

Both limits must hold, so the larger diameter governs.

d = max(54.53, 69.42) = 69.42 mm

Answer

d = 69.42 mm

Here stiffness governs.

5.Mohr’s circle & stress transformation

Answer: τmax = 67.08 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((50 − 110)/2)² + 60²) = 67.08 MPa

Answer

τmax = 67.08 MPa
6.Mohr’s circle & stress transformation

Answer: τmax = 136.4 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Stresses at the surface

σ = F/A = 130000/(π·25²/4) = 130000/490.9 = 264.8 MPa
τ = 16T/(πd³) = 16·100000/(π·25³) = 32.59 MPa
στxyCτmax​

Mohr’s circle

C = σ/2 = 132.4 MPa
R = √(132.4² + 32.59²) = 136.4 MPa

Answer

τmax = 136.4 MPa
7.Axial stress & strain

Answer: ε = 870.4 µε

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·16²/4 = 201.1 mm²
σ = P/A = 35·1000/201.1 = 174.1 MPa

Strain (Hooke’s law)

E for steel = 200 GPa = 200000 MPa.

ε = σ/E = 174.1/200000 = 0.0008704 = 870.4 µε

Answer

ε = 870.4 µε
8.Axial stress & strain

Answer: δ = 2.488 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·35²/4 = 962.1 mm², A2 = π·20²/4 = 314.2 mm²
σ1 = 36.38 MPa
σ2 = 111.4 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 36.38·500/70000 = 0.2598 mm
δ2 = σ2L2/E2 = 111.4·2000/100000 = 2.228 mm
δ = δ1 + δ2 = 2.488 mm

Answer

δ = 2.488 mm
9.Column buckling

Answer: Pcr = 11.75 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 40·25³/12 = 52083 mm⁴

Effective length

KL = 0.7·2500 = 1750 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·52083/1750² = 11750 N = 11.75 kN

Answer

Pcr = 11.75 kN
10.Column buckling

Answer: d = 34.85 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2.5·5000 = 12500 N
KL = 2·1000 = 2000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·12500·2000²/(π³·70000))^(1/4) = 34.85 mm

Answer

d = 34.85 mm

Check: the slenderness KL/r is 229.6, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: fd = 2.847 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(40000/80) = 22.36 rad/s
fn = 22.36/(2π) = 3.559 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 3.559·√(1 − 0.6²) = 2.847 Hz

Answer

fd = 2.847 Hz
12.Mechanical vibrations

Answer: fn = 2.187 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 60 + 25 = 85 kN/m
keq = 85·5/(85 + 5) = 4.722 kN/m

Natural frequency

ωn = √(4722/25) = 13.74 rad/s
fn = 13.74/(2π) = 2.187 Hz

Answer

fn = 2.187 Hz

ExamProblems · examproblems.com/courses/machine-design