Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 18N2​ = 48

A 5.5 kW motor running at 960 rpm drives a pinion with 18 teeth, which meshes with a gear with 48 teeth. The gear pair has an efficiency of 96%. Find the output torque T2 on the gear shaft.

P = 5.5 kWn1 = 960 rpmN1 = 18N2 = 48η = 96%
T2 = N·m
2.Gears & gear trainsHard
A = 12B = 60C = 16D = 45

A 5.5 kW motor at 1440 rpm drives gear A (12 teeth), which meshes with gear B (60 teeth). Gear C (16 teeth) on the same shaft as B drives gear D (45 teeth) on the output shaft. Each gear mesh has an efficiency of 96%. Find the output torque Tout.

P = 5.5 kWnin = 1440 rpmA = 12B = 60C = 16D = 45ηmesh = 96%
Tout = N·m
3.Torsion of shaftsMedium
T = 500 N·md = 30 mmL = 1.5 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 500 N·md = 30 mmL = 1.5 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
do​ = ?15 kW, 750 rpm

A hollow shaft must transmit 15 kW at 750 rpm. Its inner diameter is to be 0.8 times its outer diameter, and the shear stress must not exceed 60 MPa. Find the smallest outer diameter do.

P = 15 kWN = 750 rpmdi/do = 0.8τallow = 60 MPa
do = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 20σy​ = 100τxy​ = −50MPa

A point in a loaded part has σₓ = 20 MPa, σᵧ = 100 MPa and τₓᵧ = −50 MPa (tension positive). Find the angle θp from the x-axis to the direction of the largest principal stress, between −90° and 90°.

σx = 20 MPaσy = 100 MPaτxy = −50 MPa
θp = °
6.Mohr’s circle & stress transformationHard
σx​ = 20σy​ = 10τxy​ = 60MPa

A point in a thin plate is in plane stress: σₓ = 20 MPa, σᵧ = 10 MPa and τₓᵧ = 60 MPa (σz = 0). The material has a yield strength of 420 MPa. Find the factor of safety n against yielding by the Tresca (maximum shear stress) criterion.

σx = 20 MPaσy = 10 MPaτxy = 60 MPaσY = 420 MPa
n =
7.Axial stress & strainMedium
Ø 10 mmSteel0.5 mP = 15 kN

Find the axial strain ε in the steel bar, in microstrain (µε = 10⁻⁶).

P = 15 kNd = 10 mmL = 0.5 mE = 200 GPa
ε = µε
8.Axial stress & strainHard
Ø 25 mmBrass2 mØ 12 mmAluminium2 mP = 95 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 95 kNsegment 1: Ø25 mm, 2 m, brass (E = 100 GPa)segment 2: Ø12 mm, 2 m, aluminium (E = 70 GPa)
δ = mm
9.Column bucklingMedium
PL = 2 m20 × 50 mmcross-section

A column of length L made of steel is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 2 mE = 200 GPa (steel)b × h = 20 × 50 mm
Pcr = kN
10.Column bucklingHard
PL = 6 md = 30 mmcross-section

A column of length L made of aluminium is fixed at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 6 mE = 70 GPa (aluminium)d = 30 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 20 kN/mc = 110 N·s/mm = 15 kg

A 15 kg mass is supported by a spring with a stiffness of 20 kN/m and a viscous damper with a damping coefficient of 110 N·s/m. Find the damping ratio ζ.

m = 15 kgk = 20 kN/mc = 110 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 15k2​ = 20m = 40 kg

A 40 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 15 kN/m and the lower one k₂ = 20 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 40 kgk1 = 15 kN/mk2 = 20 kN/m
keq = kN/m

3Solutions

1.Gears & gear trains

Answer: T2 = 140.1 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 5500/100.5 = 54.71 N·m

Output torque

T2 = 54.71·48/18·0.96 = 140.1 N·m

Answer

T2 = 140.1 N·m
2.Gears & gear trains

Answer: Tout = 472.7 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1440·(12/60)·(16/45) = 102.4 rpm
ωout = 2π·102.4/60 = 10.72 rad/s

Output power and torque

Pout = 5500·0.96² = 5069 W
Tout = Pout/ωout = 5069/10.72 = 472.7 N·m

Answer

Tout = 472.7 N·m
3.Torsion of shafts

Answer: φ = 6.755 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·30⁴/32 = 79522 mm⁴

Angle of twist

φ = TL/(GJ) = 500·1000·1500/(80000·79522) = 0.1179 rad
φ = 0.1179·180/π = 6.755°

Answer

φ = 6.755°
4.Torsion of shafts

Answer: do = 30.17 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·750/60 = 78.54 rad/s
T = P/ω = 15000/78.54 = 191 N·m

Outer diameter from the allowable stress

T = 191 N·m = 190986 N·mm
1 − k⁴ = 1 − 0.8⁴ = 0.5904
do = ∛(16T/(π·τallow·(1 − k⁴))) = ∛(16·190986/(π·60·0.5904)) = 30.17 mm
di = 0.8·30.17 = 24.14 mm

Answer

do = 30.17 mm

A solid shaft would need d = 25.31 mm; the hollow one is a little larger but much lighter.

5.Mohr’s circle & stress transformation

Answer: θp = −64.33 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCσ1​σ2​

Angle on the circle

Point x sits at an angle 2θp from the σ-axis on Mohr’s circle; the quadrant follows from the signs of σₓ − σᵧ and τₓᵧ.

2θp = atan2(2·−50, 20 − 100) = −128.7°

Angle on the element

θp = −64.33°

Answer

θp = −64.33°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: n = 3.488

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Yield criteria: von Mises predicts yield when σvM = √(σ₁² − σ₁σ₂ + σ₂²) reaches σY; Tresca when the absolute maximum shear stress reaches σY/2.

στxyCσ1​σ2​

Principal stresses

C = 15 MPa, R = 60.21 MPa
σ1 = 75.21 MPa, σ2 = −45.21 MPa, σ3 = 0

Tresca

σmax − σmin = 120.4 MPa
n = 420/120.4 = 3.488

Answer

n = 3.488

n > 1 means the point does not yield; Tresca is slightly more conservative than von Mises.

7.Axial stress & strain

Answer: ε = 954.9 µε

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·10²/4 = 78.54 mm²
σ = P/A = 15·1000/78.54 = 191 MPa

Strain (Hooke’s law)

E for steel = 200 GPa = 200000 MPa.

ε = σ/E = 191/200000 = 0.0009549 = 954.9 µε

Answer

ε = 954.9 µε
8.Axial stress & strain

Answer: δ = 27.87 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·25²/4 = 490.9 mm², A2 = π·12²/4 = 113.1 mm²
σ1 = 193.5 MPa
σ2 = 840 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 193.5·2000/100000 = 3.871 mm
δ2 = σ2L2/E2 = 840·2000/70000 = 24 mm
δ = δ1 + δ2 = 27.87 mm

Answer

δ = 27.87 mm
9.Column buckling

Answer: Pcr = 4.112 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 50·20³/12 = 33333 mm⁴

Effective length

KL = 2·2000 = 4000 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·33333/4000² = 4112 N = 4.112 kN

Answer

Pcr = 4.112 kN
10.Column buckling

Answer: σcr = 4.318 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·30⁴/64 = 39761 mm⁴

Radius of gyration and slenderness

A = 706.9 mm²
r = √(I/A) = √(39761/706.9) = 7.5 mm
KL = 0.5·6000 = 3000 mm
KL/r = 3000/7.5 = 400

Critical stress

σcr = π²E/(KL/r)² = π²·70000/400² = 4.318 MPa

Answer

σcr = 4.318 MPa
11.Mechanical vibrations

Answer: ζ = 0.1004

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(20000·15) = 1095 N·s/m

Damping ratio

ζ = c/cc = 110/1095 = 0.1004

Answer

ζ = 0.1004

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: keq = 8.571 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/15 + 1/20 → keq = 15·20/(15 + 20) = 8.571 kN/m

Answer

keq = 8.571 kN/m

ExamProblems · examproblems.com/courses/machine-design