Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
Nw​ = 50z = 3, 1450 rpm

A worm with 3 start(s) turns at 1450 rpm and drives a worm wheel with 50 teeth. Find the speed nw of the wheel.

z = 3Nw = 50n = 1450 rpm
nw = rpm
2.Gears & gear trainsHard
Ns​ = 24nr​ = ?Np​ = 24carrier fixed

In a planetary gear set the sun gear has 24 teeth and each planet gear has 24 teeth. The planet carrier is held fixed and the sun is driven at 1200 rpm. Find the speed nr of the ring gear (magnitude).

Ns = 24Np = 24ns = 1200 rpm
nr = rpm
3.Torsion of shaftsMedium
T = 250 N·md = 40 mmL = 2.5 mφ = ?

A solid aluminium shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 250 N·md = 40 mmL = 2.5 mG = 26 GPa
φ = °
4.Torsion of shaftsHard
d = 30 mmTB​ = 1000 N·mTC​ = 250 N·mABC0.5 m3 m

A solid brass shaft of diameter 30 mm is fixed at A. A torque of 1000 N·m acts at B, 0.5 m from A, and a torque of 250 N·m in the same direction acts at the free end C, a further 3 m along. Find the maximum shear stress τmax in the shaft.

d = 30 mmTB = 1000 N·mTC = 250 N·mAB = 0.5 mBC = 3 m
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = −80σy​ = 40τxy​ = −60MPa

A point in a loaded part has σₓ = −80 MPa, σᵧ = 40 MPa and τₓᵧ = −60 MPa (tension positive). Find the angle θp from the x-axis to the direction of the largest principal stress, between −90° and 90°.

σx = −80 MPaσy = 40 MPaτxy = −60 MPa
θp = °
6.Mohr’s circle & stress transformationHard
σx​τxy​top surface of the shaft

A solid shaft of diameter 50 mm carries a bending moment of 200 N·m together with a torque of 500 N·m. At the top surface, where the bending stress is tensile and largest, find the largest principal stress σ1.

d = 50 mmM = 200 N·mT = 500 N·m
σ1 = MPa
7.Axial stress & strainMedium
Ø 30 mmCopper0.5 mP = 20 kN

Find the elongation δ of the copper bar under the axial load.

P = 20 kNd = 30 mmL = 0.5 mE = 117 GPa
δ = mm
8.Axial stress & strainHard
P = ?Ø20120 GPaØ120/60300 mm

A steel rod (diameter 20 mm, E = 200 GPa, allowable stress 200 MPa) sits inside a tube made of copper (outer diameter 120 mm, inner diameter 60 mm, E = 120 GPa, allowable stress 60 MPa). They are compressed together between rigid plates. Find the largest load Pmax.

rod: Ø20 mm, E = 200 GPa, σallow = 200 MPatube: Ø120/Ø60 mm, E = 120 GPa, σallow = 60 MPa
Pmax = kN
9.Column bucklingMedium
PL = 2.5 md = 80 mmcross-section

A column of length L made of aluminium is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 2.5 mE = 70 GPa (aluminium)d = 80 mm
Pcr = kN
10.Column bucklingHard
P = 35 kNL = 5 md = ?cross-section

A solid round column of length L made of aluminium is fixed at the base and pinned at the top. It must carry 35 kN with a factor of safety of 2.5 against buckling. Find the smallest diameter d.

P = 35 kNn = 2.5L = 5 mE = 70 GPa (aluminium)
d = mm
11.Mechanical vibrationsMedium
k = 80 kN/mc = 360 N·s/mm = 10 kg

A 10 kg mass is supported by a spring with a stiffness of 80 kN/m and a viscous damper with a damping coefficient of 360 N·s/m. Find the damping ratio ζ.

m = 10 kgk = 80 kN/mc = 360 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 80k2​ = 20k3​ = 15m = 5 kg

A 5 kg mass hangs from spring k₃ = 15 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 80 kN/m and k₂ = 20 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 80 kN/mk2 = 20 kN/mk3 = 15 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: nw = 87 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 1450·3/50 = 87 rpm

Answer

nw = 87 rpm
2.Gears & gear trains

Answer: nr = 400 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 24 + 2·24 = 72

Willis equation with the carrier fixed

With nc = 0 the sun drives the ring through the planets, which act as idlers.

nr = −ns·Ns/Nr = −1200·24/72 = −400 rpm
|nr| = 400 rpm

Answer

nr = 400 rpm

The ring turns opposite to the sun.

3.Torsion of shafts

Answer: φ = 5.48 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·40⁴/32 = 251327 mm⁴

Angle of twist

φ = TL/(GJ) = 250·1000·2500/(26000·251327) = 0.09565 rad
φ = 0.09565·180/π = 5.48°

Answer

φ = 5.48°
4.Torsion of shafts

Answer: τmax = 235.8 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Internal torques

Sense of TC taken as positive.

TBC = TC = 250 N·m
TAB = TC + TB = 250 + 1000 = 1250 N·m

Maximum shear stress

The segment with the largest internal torque has the largest stress (same diameter).

|T|max = 1250 N·m
τmax = 16·1.25 × 10⁶/(π·30³) = 235.8 MPa

Answer

τmax = 235.8 MPa
5.Mohr’s circle & stress transformation

Answer: θp = −67.5 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCσ1​σ2​

Angle on the circle

Point x sits at an angle 2θp from the σ-axis on Mohr’s circle; the quadrant follows from the signs of σₓ − σᵧ and τₓᵧ.

2θp = atan2(2·−60, −80 − 40) = −135°

Angle on the element

θp = −67.5°

Answer

θp = −67.5°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: σ1 = 30.09 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Stresses at the surface

σ = 32M/(πd³) = 32·200000/(π·50³) = 16.3 MPa
τ = 16T/(πd³) = 16·500000/(π·50³) = 20.37 MPa
στxyCσ1​σ2​

Mohr’s circle

C = σ/2 = 8.149 MPa
R = √(8.149² + 20.37²) = 21.94 MPa
σ1 = C + R = 30.09 MPa
σ2 = C − R = −13.79 MPa

Answer

σ1 = 30.09 MPa
7.Axial stress & strain

Answer: δ = 0.1209 mm

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·30²/4 = 706.9 mm²
σ = P/A = 20·1000/706.9 = 28.29 MPa

Strain (Hooke’s law)

E for copper = 117 GPa = 117000 MPa.

ε = σ/E = 28.29/117000 = 0.0002418 = 241.8 µε

Elongation

δ = ε·L = 0.0002418·500 mm = 0.1209 mm

Answer

δ = 0.1209 mm
8.Axial stress & strain

Answer: Pmax = 540.4 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·20²/4 = 314.2 mm²
At = π(120² − 60²)/4 = 8482 mm²

Combined axial stiffness

ΣEA = 200·10³·314.2 + 120·10³·8482 = 1.081 × 10⁹ N

Governing strain

ε = min(0.001, 0.0005) = 0.0005 (copper)

Largest load

Pmax = 0.0005·1.081 × 10⁹ = 540354 N = 540.4 kN

Answer

Pmax = 540.4 kN
9.Column buckling

Answer: Pcr = 55.56 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·80⁴/64 = 2.011 × 10⁶ mm⁴

Effective length

KL = 2·2500 = 5000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·2.011 × 10⁶/5000² = 55563 N = 55.56 kN

Answer

Pcr = 55.56 kN
10.Column buckling

Answer: d = 74.98 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2.5·35000 = 87500 N
KL = 0.7·5000 = 3500 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·87500·3500²/(π³·70000))^(1/4) = 74.98 mm

Answer

d = 74.98 mm

Check: the slenderness KL/r is 186.7, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.2012

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(80000·10) = 1789 N·s/m

Damping ratio

ζ = c/cc = 360/1789 = 0.2012

Answer

ζ = 0.2012

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: fn = 8.129 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 80 + 20 = 100 kN/m
keq = 100·15/(100 + 15) = 13.04 kN/m

Natural frequency

ωn = √(13043/5) = 51.08 rad/s
fn = 51.08/(2π) = 8.129 Hz

Answer

fn = 8.129 Hz

ExamProblems · examproblems.com/courses/machine-design