Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 12N2​ = 30

A 4 kW motor running at 1440 rpm drives a pinion with 12 teeth, which meshes with a gear with 30 teeth. The gear pair has an efficiency of 98%. Find the torque T1 on the motor shaft.

P = 4 kWn1 = 1440 rpmN1 = 12N2 = 30η = 98%
T1 = N·m
2.Gears & gear trainsHard
A = 20B = 80C = 20D = ?

In a compound gear train, gear A (20 teeth) on the input shaft turns at 2880 rpm and drives gear B (80 teeth). Gear C (20 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 300 rpm. How many teeth ND must gear D have?

nin = 2880 rpmA = 20B = 80C = 20nout = 300 rpm
ND =
3.Torsion of shaftsMedium
d = ?T = 2000 N·mL = 0.5 m

A solid brass shaft 0.5 m long carries a torque of 2000 N·m. The angle of twist between its ends must not exceed 2°. Find the smallest diameter d that meets this limit.

T = 2000 N·mL = 0.5 mG = 39 GPaφallow = 2°
d = mm
4.Torsion of shaftsHard
Tdo​ = 40 mm, di​ = 28 mm

A hollow shaft transmits 10 kW at 3000 rpm. Find the maximum shear stress τmax in the shaft.

P = 10 kWN = 3000 rpmdo = 40 mmdi = 28 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = 30σy​ = −70τxy​ = 10MPa

A point in a loaded part has σₓ = 30 MPa, σᵧ = −70 MPa and τₓᵧ = 10 MPa (tension positive). Find the angle θp from the x-axis to the direction of the largest principal stress, between −90° and 90°.

σx = 30 MPaσy = −70 MPaτxy = 10 MPa
θp = °
6.Mohr’s circle & stress transformationHard
σx​ = −80σy​ = 110τxy​ = 60MPa

A point in a loaded part has σₓ = −80 MPa, σᵧ = 110 MPa and τₓᵧ = 60 MPa (tension positive). Find the shear stress τθ on a plane whose normal is rotated 15° counter-clockwise from the x-axis (positive in the same sense as τₓᵧ).

σx = −80 MPaσy = 110 MPaτxy = 60 MPaθ = 15°
τθ = MPa
7.Axial stress & strainMedium
250 kNØ2070 GPaØ120/70300 mmδ = ?

A steel rod (diameter 20 mm, E = 200 GPa) sits inside a tube made of aluminium (outer diameter 120 mm, inner diameter 70 mm, E = 70 GPa). Both are 300 mm long and are compressed together between rigid plates by 250 kN. Find the shortening δ.

P = 250 kNrod: Ø20 mm, E = 200 GPatube: Ø120/Ø70 mm, E = 70 GPaL = 300 mm
δ = mm
8.Axial stress & strainHard
100 kN12500 mm300 mmØ25Ø30σ2​ = ?

A steel segment (diameter 25 mm, length 500 mm, E = 200 GPa) and a segment made of aluminium (diameter 30 mm, length 300 mm, E = 70 GPa) are joined end to end and fixed between two rigid walls. An axial load of 100 kN acts at the joint, towards segment 2. Find the magnitude of the stress σ2 in segment 2.

segment 1: steel, Ø25 mm, 500 mm, E = 200 GPasegment 2: aluminium, Ø30 mm, 300 mm, E = 70 GPaP = 100 kN
σ2 = MPa
9.Column bucklingMedium
PL = 4 md = 40 mmcross-section

A column of length L made of steel is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 4 mE = 200 GPa (steel)d = 40 mm
Pcr = kN
10.Column bucklingHard
PL = 5 md = 50 mmcross-section

A column of length L made of steel is fixed at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 5 mE = 200 GPa (steel)d = 50 mm
σcr = MPa
11.Mechanical vibrationsMedium
tx12 mm3 cycles3.9 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 12 mm is followed 3 cycles later by a peak of 3.9 mm. Find the damping ratio ζ.

x0 = 12 mmx3 = 3.9 mmn = 3
ζ =
12.Mechanical vibrationsHard
k1​ = 10k2​ = 15k3​ = 5m = 10 kg

A 10 kg mass hangs from spring k₃ = 5 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 10 kN/m and k₂ = 15 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 10 kN/mk2 = 15 kN/mk3 = 5 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T1 = 26.53 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 4000/150.8 = 26.53 N·m

Answer

T1 = 26.53 N·m
2.Gears & gear trains

Answer: ND = 48

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 2880·20/80 = 720 rpm

Teeth on gear D

ND = C·nC/nout = 20·720/300 = 48

Answer

ND = 48
3.Torsion of shafts

Answer: d = 52.3 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Required polar moment

T = 2000 N·m = 2 × 10⁶ N·mm
L = 0.5 m = 500 mm
G = 39 GPa = 39000 MPa
φ = 2·π/180 = 0.03491 rad
J = TL/(Gφ) = 2 × 10⁶·500/(39000·0.03491) = 734561 mm⁴

Diameter

d = (32J/π)1/4 = 52.3 mm

Answer

d = 52.3 mm

In practice you would round up to the next standard size.

4.Torsion of shafts

Answer: τmax = 3.333 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·3000/60 = 314.2 rad/s
T = P/ω = 10000/314.2 = 31.83 N·m

Polar second moment of area

J = π(40⁴ − 28⁴)/32 = 190984 mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 31831·20/190984 = 3.333 MPa

Answer

τmax = 3.333 MPa
5.Mohr’s circle & stress transformation

Answer: θp = 5.655 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCσ1​σ2​

Angle on the circle

Point x sits at an angle 2θp from the σ-axis on Mohr’s circle; the quadrant follows from the signs of σₓ − σᵧ and τₓᵧ.

2θp = atan2(2·10, 30 − −70) = 11.31°

Angle on the element

θp = 5.655°

Answer

θp = 5.655°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: τθ = 99.46 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

τθ = −−95·0.5 + 60·0.866 = 99.46 MPa

Answer

τθ = 99.46 MPa
7.Axial stress & strain

Answer: δ = 0.1282 mm

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·20²/4 = 314.2 mm²
At = π(120² − 70²)/4 = 7461 mm²

Combined axial stiffness

ΣEA = 200·10³·314.2 + 70·10³·7461 = 5.851 × 10⁸ N

Shortening

δ = 250000·300/5.851 × 10⁸ = 0.1282 mm

Answer

δ = 0.1282 mm
8.Axial stress & strain

Answer: σ2 = 64.58 MPa

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Stiffnesses

k₁ = 200000·490.9/500 = 196350 N/mm
k₂ = 70000·706.9/300 = 164934 N/mm

Share of segment 2

F2 = 100000·164934/361283 = 45652 N

Stress

σ2 = 45652/706.9 = 64.58 MPa (compression)

Answer

σ2 = 64.58 MPa
9.Column buckling

Answer: Pcr = 31.64 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·40⁴/64 = 125664 mm⁴

Effective length

KL = 0.7·4000 = 2800 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·125664/2800² = 31639 N = 31.64 kN

Answer

Pcr = 31.64 kN
10.Column buckling

Answer: σcr = 49.35 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·50⁴/64 = 306796 mm⁴

Radius of gyration and slenderness

A = 1963 mm²
r = √(I/A) = √(306796/1963) = 12.5 mm
KL = 0.5·5000 = 2500 mm
KL/r = 2500/12.5 = 200

Critical stress

σcr = π²E/(KL/r)² = π²·200000/200² = 49.35 MPa

Answer

σcr = 49.35 MPa
11.Mechanical vibrations

Answer: ζ = 0.05952

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/3)·ln(12/3.9) = 0.3746

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3746/√(39.48 + 0.1404) = 0.05952

Answer

ζ = 0.05952
12.Mechanical vibrations

Answer: fn = 3.249 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 10 + 15 = 25 kN/m
keq = 25·5/(25 + 5) = 4.167 kN/m

Natural frequency

ωn = √(4167/10) = 20.41 rad/s
fn = 20.41/(2π) = 3.249 Hz

Answer

fn = 3.249 Hz

ExamProblems · examproblems.com/courses/machine-design