Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 30N2​ = 45

A 0.75 kW motor running at 1440 rpm drives a pinion with 30 teeth, which meshes with a gear with 45 teeth. The gear pair has an efficiency of 96%. Find the output torque T2 on the gear shaft.

P = 0.75 kWn1 = 1440 rpmN1 = 30N2 = 45η = 96%
T2 = N·m
2.Gears & gear trainsHard
A = 12B = 15C = 16D = 80

In a compound gear train, gear A (12 teeth) on the input shaft turning at 1500 rpm drives gear B (15 teeth). Gear C (16 teeth) is fixed to the same shaft as B and drives gear D (80 teeth) on the output shaft. Find the output speed nout.

nin = 1500 rpmA = 12B = 15C = 16D = 80
nout = rpm
3.Torsion of shaftsMedium
d = ?T = 1500 N·mL = 1.5 m

A solid aluminium shaft 1.5 m long carries a torque of 1500 N·m. The angle of twist between its ends must not exceed 0.5°. Find the smallest diameter d that meets this limit.

T = 1500 N·mL = 1.5 mG = 26 GPaφallow = 0.5°
d = mm
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 15 kW at 3000 rpm without the shear stress exceeding 80 MPa. Find the smallest diameter d that works.

P = 15 kWN = 3000 rpmτallow = 80 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 100σy​ = −60τxy​ = −20MPa

A point in a loaded part has σₓ = 100 MPa, σᵧ = −60 MPa and τₓᵧ = −20 MPa (tension positive). Find the angle θp from the x-axis to the direction of the largest principal stress, between −90° and 90°.

σx = 100 MPaσy = −60 MPaτxy = −20 MPa
θp = °
6.Mohr’s circle & stress transformationHard
σx​ = −10σy​ = 120τxy​ = −60MPa

A point in a loaded part has σₓ = −10 MPa, σᵧ = 120 MPa and τₓᵧ = −60 MPa (tension positive). Find the shear stress τθ on a plane whose normal is rotated 60° counter-clockwise from the x-axis (positive in the same sense as τₓᵧ).

σx = −10 MPaσy = 120 MPaτxy = −60 MPaθ = 60°
τθ = MPa
7.Axial stress & strainMedium
P = ?12300 mm500 mmØ40Ø50δ = 0.2 mm

A bar is made of a steel segment (diameter 40 mm, length 300 mm, E = 200 GPa) joined end to end with a segment made of aluminium (diameter 50 mm, length 500 mm, E = 70 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.2 mm in total.

segment 1: steel, Ø40 mm, 300 mm, E = 200 GPasegment 2: aluminium, Ø50 mm, 500 mm, E = 70 GPaδ = 0.2 mm
P = kN
8.Axial stress & strainHard
Ø 40 mmBrass2 mØ 20 mmAluminium1.5 mP = 95 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the largest normal stress σmax in the bar.

P = 95 kNsegment 1: Ø40 mm, 2 m, brass (E = 100 GPa)segment 2: Ø20 mm, 1.5 m, aluminium (E = 70 GPa)
σmax = MPa
9.Column bucklingMedium
PL = 4 md = 40 mmcross-section

A column of length L made of aluminium is fixed at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 4 mE = 70 GPa (aluminium)d = 40 mm
Pcr = kN
10.Column bucklingHard
P = 95 kNL = 1.5 md = ?cross-section

A solid round column of length L made of aluminium is fixed at the base and free at the top. It must carry 95 kN with a factor of safety of 2.5 against buckling. Find the smallest diameter d.

P = 95 kNn = 2.5L = 1.5 mE = 70 GPa (aluminium)
d = mm
11.Mechanical vibrationsMedium
k = 20 kN/mc = 2400 N·s/mm = 200 kg

A 200 kg mass is supported by a spring with a stiffness of 20 kN/m and a viscous damper with a damping coefficient of 2400 N·s/m. Find the damping ratio ζ.

m = 200 kgk = 20 kN/mc = 2400 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 20k2​ = 60m = 100 kg

A 100 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 20 kN/m and k₂ = 60 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 100 kgk1 = 20 kN/mk2 = 60 kN/m
keq = kN/m

3Solutions

1.Gears & gear trains

Answer: T2 = 7.162 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 750/150.8 = 4.974 N·m

Output torque

T2 = 4.974·45/30·0.96 = 7.162 N·m

Answer

T2 = 7.162 N·m
2.Gears & gear trains

Answer: nout = 240 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1500·12/15 = 1200 rpm = nC

Second stage

nout = 1200·16/80 = 240 rpm

Answer

nout = 240 rpm

total ratio = 6.25 : 1

3.Torsion of shafts

Answer: d = 100.3 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Required polar moment

T = 1500 N·m = 1.5 × 10⁶ N·mm
L = 1.5 m = 1500 mm
G = 26 GPa = 26000 MPa
φ = 0.5·π/180 = 0.008727 rad
J = TL/(Gφ) = 1.5 × 10⁶·1500/(26000·0.008727) = 9.917 × 10⁶ mm⁴

Diameter

d = (32J/π)1/4 = 100.3 mm

Answer

d = 100.3 mm

In practice you would round up to the next standard size.

4.Torsion of shafts

Answer: d = 14.49 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·3000/60 = 314.2 rad/s
T = P/ω = 15000/314.2 = 47.75 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·47746/(π·80)) = 14.49 mm

Answer

d = 14.49 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: θp = −7.018 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCσ1​σ2​

Angle on the circle

Point x sits at an angle 2θp from the σ-axis on Mohr’s circle; the quadrant follows from the signs of σₓ − σᵧ and τₓᵧ.

2θp = atan2(2·−20, 100 − −60) = −14.04°

Angle on the element

θp = −7.018°

Answer

θp = −7.018°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: τθ = 86.29 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

τθ = −−65·0.866 + −60·−0.5 = 86.29 MPa

Answer

τθ = 86.29 MPa
7.Axial stress & strain

Answer: P = 41.4 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 1257 mm², A₂ = 1963 mm²

Flexibilities

L₁/(E₁A₁) = 300/(200000·1257) = 1.194 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 500/(70000·1963) = 3.638 × 10⁻⁶ mm/N

Load

P = 0.2/4.831 × 10⁻⁶ = 41395 N = 41.4 kN

Answer

P = 41.4 kN
8.Axial stress & strain

Answer: σmax = 302.4 MPa

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·40²/4 = 1257 mm², A2 = π·20²/4 = 314.2 mm²
σ1 = 75.6 MPa
σ2 = 302.4 MPa

Largest stress

The thinner segment has the smaller area, so it carries the larger stress.

σmax = 302.4 MPa

Answer

σmax = 302.4 MPa
9.Column buckling

Answer: Pcr = 21.7 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·40⁴/64 = 125664 mm⁴

Effective length

KL = 0.5·4000 = 2000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·125664/2000² = 21704 N = 21.7 kN

Answer

Pcr = 21.7 kN
10.Column buckling

Answer: d = 89.1 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2.5·95000 = 237500 N
KL = 2·1500 = 3000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·237500·3000²/(π³·70000))^(1/4) = 89.1 mm

Answer

d = 89.1 mm

Check: the slenderness KL/r is 134.7, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.6

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(20000·200) = 4000 N·s/m

Damping ratio

ζ = c/cc = 2400/4000 = 0.6

Answer

ζ = 0.6

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: keq = 80 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 20 + 60 = 80 kN/m

Answer

keq = 80 kN/m

ExamProblems · examproblems.com/courses/machine-design