Maternity Nursing: cram pack

Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Maternity & obstetric nursing

Method

  1. Place the woman in time: weeks of pregnancy, stage of labour or day after birth, and decide what is normal at that point.
  2. Look for the patient in danger: the mother, the fetus or the newborn, or more than one of them.
  3. Link the finding to its cause: VEAL CHOP for decelerations, the four Ts for bleeding, BUBBLE-HE after birth.
  4. Choose the action that improves blood flow and oxygen first (side-lying, stopping oxytocin, fundal massage), then escalate.

Dosage calculations

Dose from strength
volume = dose / strength
Weight-based dose
dose = mg/kg × body weight
Tablets
number = dose / tablet strength
Units
1 g = 1000 mg, 1 mg = 1000 mcg

Method

  1. Convert the ordered dose and the stock strength to the same unit.
  2. Use desired over have times quantity: (D/H) × Q.
  3. For weight-based doses, multiply by the weight in kg first, then divide the daily dose by the number of doses.
  4. Estimate first and check that the answer is reasonable.

IV infusion rates

Pump rate
mL/h = volume (mL)/time (h)
Drip rate
drops/min = volume (mL) × drop factor / time (min)
Infusion time
time (h) = volume (mL)/rate (mL/h)

Method

  1. Pump rate in mL/h: volume divided by time in hours.
  2. Drip rate in drops/min: volume × drop factor divided by time in minutes.
  3. For time remaining: volume left divided by the rate.
  4. Round as the question or the equipment requires.

2Practice problems

1.Maternity & obstetric nursingMedium

Misoprostol is given for postpartum haemorrhage. Which side effect is common?

  1. ABronchospasm in all patients
  2. BBradycardia and hypoglycaemia
  3. CShivering and fever
  4. DSevere hypertension
2.Maternity & obstetric nursingHard

A woman with a previous caesarean is having a trial of labour. Which induction agent should the nurse question?

  1. AOxytocin used per protocol
  2. BAmniotomy
  3. CMisoprostol
  4. DA balloon catheter
3.Dosage calculationsMedium
1:10 000ampouleV = ? mL

A prefilled syringe of epinephrine (adrenaline) is labelled 1:10 000 (0.1 mg/mL). The prescription is 1 mg IV in cardiac arrest. What volume V do you give?

1:10 0001 mg
V = mL
4.Dosage calculationsHard
00.10.20.30.40.50.60.70.80.911 mL

The prescription is 320 units of a drug that comes as 1000 units/mL. Draw up the dose in the 1 mL syringe: what volume V do you give?

320 units1000 units/mL
V = mL
5.IV infusion ratesMedium
800 mLleft? mL/h5 h left

1000 mL was ordered over 8 hours. After 3 hours you find that 800 mL is still in the bag, and the order must still finish on time. To what rate R in mL/h must the pump be reset?

1000 mL / 8 hafter 3 h: 800 mL
R = mL/h
6.IV infusion ratesHard
1 g250 mL? mL/h4 mg/min

A bag contains 1 g of a drug in 250 mL. The order is 4 mg per minute. At what rate R do you set the pump, in mL/h?

1 g/250 mL4 mg/min
R = mL/h

3Solutions

1.Maternity & obstetric nursing

Answer: C · Shivering and fever

Why this is the answer

Misoprostol, a prostaglandin E1 analogue, commonly causes shivering and a raised temperature, as well as nausea and diarrhoea. It is useful where other uterotonics are not available.

Answer

C · Shivering and fever
2.Maternity & obstetric nursing

Answer: C · Misoprostol

Why this is the answer

Misoprostol is avoided in women with a uterine scar because of a high risk of uterine rupture. Mechanical methods, amniotomy and carefully monitored oxytocin may be used.

Answer

C · Misoprostol
3.Dosage calculations

Answer: V = 10 mL

Solution strengths: a percentage strength is grams per 100 mL, so 1% = 1 g/100 mL = 10 mg/mL. A ratio strength 1:1000 means 1 g in 1000 mL = 1 mg/mL; 1:10 000 is 0.1 mg/mL. For a dilution the amount of drug stays the same: C₁·V₁ = C₂·V₂.

Concentration

1:10 000 = 1 g/10000 mL = 0.1 mg/mL

Volume

V = 1/0.1 = 10 mL

Answer

V = 10 mL

US labels now state mg/mL (1 mg/mL = 1:1000; 0.1 mg/mL = 1:10 000). Never give 1 mg/mL epinephrine IV push.

4.Dosage calculations

Answer: V = 0.32 mL

Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.

Volume

V = 320/1000 = 0.32 mL

On the syringe

On this 1 mL syringe every small line is 0.01 mL.

Answer

V = 0.32 mL
5.IV infusion rates

Answer: R = 160 mL/h

Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.

Original rate

1000/8 = 125 mL/h

New rate

R = 800/5 = 160 mL/h

Answer

R = 160 mL/h

This is more than a 25% increase: most hospitals require you to contact the prescriber instead of catching up, and to assess the patient for fluid overload.

6.IV infusion rates

Answer: R = 60 mL/h

Dose-based infusions: concentration = amount of drug in the bag/bag volume. Pump rate (mL/h) = dose per hour/concentration, and dose per hour = mL/h × concentration. Convert per-minute doses to per-hour (× 60) and keep the mass units the same (1 g = 1000 mg, 1 mg = 1000 mcg).

Concentration

1000 mg/250 mL = 4 mg/mL

Dose per hour

4·60 = 240 mg/h

Pump rate

R = 240/4 = 60 mL/h

Answer

R = 60 mL/h

ExamProblems · examproblems.com/courses/maternity-nursing