Formula sheets, the key method steps for every topic and 10 practice problems, with full solutions at the back.
A child weighing 12 kg is prescribed 5 mg/kg of a drug. The stock solution contains 50 mg/mL. Draw up the dose: what volume V do you give?
The prescription is 6500 units of a drug that comes as 10000 units/mL. Draw up the dose in the 1 mL syringe: what volume V do you give?
A drip runs at 30 gtt/min through a set of 15 gtt/mL. How many millilitres V does the patient receive in 2 hours?
A bag contains 400 mg of a drug in 100 mL and runs at 30 mL/h. How many milligrams per hour D does the patient receive?
Practice exercise (made-up values, not clinical guidance). A bag contains 12 500 units of heparin in 250 mL. The order is 15 units/kg/h for a patient who weighs 66 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A bag contains dobutamine 250 mg in 250 mL. The order is 2.5 mcg/kg/min for a patient who weighs 65 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). The record shows a patient's intake and output for one 12-hour shift. The patient weighs 69 kg. Find the average urine output U in mL/kg/h. Round to two decimal places.
Practice exercise (made-up values, not clinical guidance). A 1000 mL bag was started at 11:30 and runs by pump at 50 mL/h. How many mL V are left in the bag at 15:00?
Practice exercise (made-up values, not clinical guidance). A patient’s temperature is 39.5 °C. Convert it to degrees Fahrenheit T with °F = °C × 9/5 + 32. Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). An infusion starts at 17:00 and finishes at 01:10 the next morning (24-hour clock). How many minutes t did it run?
Answer: V = 1.2 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 10 mL syringe every small line is 0.2 mL.
Answer: V = 0.65 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 1 mL syringe every small line is 0.01 mL.
Answer: V = 240 mL
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: D = 120 mg/h
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: R = 19.8 mL/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: R = 9.8 mL/h
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: U = 1.15 mL/kg/h
Intake and output: intake counts everything that goes in (oral fluids, IV infusions, IV medications and flushes, tube feeds); ice chips count as half their volume. Output counts urine, drains, vomit and other losses. Balance = total intake − total output; a negative balance is a net loss. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: V = 825 mL
Infusion time: time (h) = volume to infuse (mL)/rate (mL/h); use the volume still left in the bag, not the bag size. Volume infused = rate × time. Convert decimal hours to hours and minutes with the fraction × 60 (0.5 h = 30 min, not 50 min). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: T = 103.1 °F
Temperature: °C = (°F − 32) × 5/9 and °F = °C × 9/5 + 32. Subtract 32 before you multiply when going from °F, and add 32 after you multiply when going from °C. A quick check: 37 °C is 98.6 °F, and every 1 °C is 1.8 °F.
Answer: t = 490 min
24-hour clock: from 1 PM onwards add 12 to the hour (3:45 PM = 15:45). Midnight to 12:59 AM is 00:00–00:59, and 12:00–12:59 PM stays 12:00–12:59. Going back, subtract 12 from hours 13–23 and add PM; hours 00 become 12 AM. Count time across midnight in two parts: up to 24:00 (00:00), then from 00:00 on.
This is independent practice material. ExamProblems is not affiliated with or endorsed by the organisation that runs this exam, and the exam name is used only to describe the content. NCLEX®, NCLEX-RN® and NCLEX-PN® are trademarks of the National Council of State Boards of Nursing, Inc. (NCSBN), which is not affiliated with ExamProblems and does not endorse it or vouch for its accuracy.
ExamProblems · examproblems.com/courses/nclex-dosage-calculations