Numerical Methods: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Numerical methods

Bisection
c = (a + b)/2, width after n steps (b − a)/2ⁿ
Newton–Raphson
xn+1 = xₙ − f(xₙ)/f′(xₙ)
Linear interpolation
y = y₁ + (y₂ − y₁)(x − x₁)/(x₂ − x₁)
Trapezoid rule
T = (h/2)[f₀ + 2f₁ + … + 2fn−1 + fₙ], h = (b − a)/n
Simpson’s rule (n even)
S = (h/3)[f₀ + 4f₁ + 2f₂ + … + 4fn−1 + fₙ]
Trapezoid error bound
|E| ≤ (b − a)h²M/12, M = max|f″|
Euler
yn+1 = yₙ + h·f(tₙ, yₙ)
Heun
yn+1 = yₙ + (h/2)(k₁ + k₂), k₂ = f(tₙ + h, yₙ + hk₁)
RK4
yn+1 = yₙ + (h/6)(k₁ + 2k₂ + 2k₃ + k₄)

Method

  1. For a root: check the sign change for bisection, or compute f and f′ for Newton, and keep six or more digits in a table of iterates.
  2. For a table value: interpolate linearly between the two neighbouring points.
  3. For an integral: find h = (b − a)/n, list f at every node, apply the weights (1, 2, …, 2, 1 for trapezoid; 1, 4, 2, …, 4, 1 for Simpson with even n) and multiply by h/2 or h/3.
  4. For an ODE: step from t₀ with yₙ₊₁ = yₙ + h·f(tₙ, yₙ) (Euler) or the averaged slope (Heun), one row per step, until you reach the requested t.

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.Numerical methodsMedium
xy00.51

Approximate ∫01 sin(x²) dx with the trapezoid rule using n = 2 strips. Give T.

f(x) = sin(x²)[a, b] = [0, 1]n = 2
T =
2.Numerical methodsHard
00.050.10.150.20.99850.9990.99951ty(0, 1)

Take one step of the classical Runge–Kutta method (RK4) with h = 0.2 for y′ = cos t − y, y(0) = 1. Find y₁ ≈ y(0.2).

y′ = cos t − yy(0) = 1h = 0.2
y1 =
3.Sequences & seriesMedium
kSn​12345678910S = ?

Find the sum S = Σk=1∞ 4/(k(k + 2)).

ak = 4/(k(k + 2))
S =
4.Sequences & seriesHard

f(x) = eˣ is approximated by its Maclaurin polynomial of degree 3 at x = 0.3. Use the Lagrange error bound M·|x|ⁿ⁺¹/(n + 1)! with M = e0.3 = 1.35 to find the largest possible error |R₃|.

f(x) = eˣn = 3x = 0.3M = 1.35
|R₃| =
5.Matrices & determinantsMedium
A =−352−5−22523

Find the determinant det A of the 3×3 matrix A shown.

A = [−3 5 2; −5 −2 2; 5 2 3]
det A =
6.Matrices & determinantsHard
A =−4−16−5b =−1−10

Solve the system −4x − y = −1 and 6x − 5y = −10. Find x.

−4x − y = −16x − 5y = −10
x =
7.Differential equationsMedium
t (min)T (°C)10Ta​T = ?

A forged steel part at 480 °C is left to cool in a workshop at 27 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.02 min⁻¹, find its temperature T after 10 min.

T0 = 480 °CTa = 27 °Ck = 0.02 min⁻¹t = 10 min
T = °C
8.Differential equationsHard
xy12(1, 0)y(2) = ?

Solve the initial value problem y′ + 2y/x = 4x2 for x > 0, with y(1) = 0. Find y(2).

y′ + 2y/x = 4x2y(1) = 0
y(2) =

3Solutions

1.Numerical methods

Answer: T = 0.3341

Numerical integration: split [a, b] into n strips of width h = (b − a)/n with nodes x₀ … xₙ. Trapezoid rule: T = (h/2)[f₀ + 2f₁ + 2f₂ + … + 2fn−1 + fₙ]. Simpson's rule (n even): S = (h/3)[f₀ + 4f₁ + 2f₂ + 4f₃ + … + 4fn−1 + fₙ]. The trapezoid error shrinks like h² (bound (b − a)h²·M/12 with M = max|f″|), Simpson's like h⁴, so Simpson is usually far more accurate for the same nodes.

ixᵢf(xᵢ)weight000110.50.2474042210.8414711

Nodes and values

h = 0.5
Σ wᵢfᵢ = 0 + 2·0.247404 + 0.841471 = 1.336279

Trapezoid rule

T = (0.5/2)·1.336279 = 0.3341

Answer

T = 0.3341

This integral has no elementary antiderivative, which is exactly when a numerical rule is needed.

2.Numerical methods

Answer: y1 = 0.9987

Numerical solution of y′ = f(t, y): Euler's method steps along the slope at the start of each step: yn+1 = yₙ + h·f(tₙ, yₙ). Heun's method (improved Euler) averages the slope at the start and at an Euler prediction: k₁ = f(tₙ, yₙ), k₂ = f(tₙ + h, yₙ + h·k₁), yn+1 = yₙ + (h/2)(k₁ + k₂). The classical Runge–Kutta method (RK4) combines four slopes: yn+1 = yₙ + (h/6)(k₁ + 2k₂ + 2k₃ + k₄). The global error of Euler is proportional to h, Heun's to h², RK4's to h⁴.

Four slopes

k₁ = f(0, 1) = 0
k₂ = f(0.1, 1) = −0.00499583
k₃ = f(0.1, 0.9995) = −0.00449625
k₄ = f(0.2, 0.999101) = −0.0190342

Combine

y₁ = 1 + (0.2/6)(0 + 2·−0.00499583 + 2·−0.00449625 − 0.0190342) = 0.9987

Answer

y1 = 0.9987
3.Sequences & series

Answer: S = 3

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Partial fractions

4/(k(k + 2)) = (4/2)·(1/k − 1/(k + 2))

Cancel

S = (4/2)·(1 + 1/2) = 3

Answer

S = 3
4.Sequences & series

Answer: |R₃| = 0.0004556

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Bound on the derivative

M = e0.3 = 1.35

Lagrange bound

|R₃| ≤ 1.35·0.3⁴/4! = 0.0004556

Answer

|R₃| = 0.0004556

The true error is smaller: |f(0.3) − P₃(0.3)| = 0.0003588.

5.Matrices & determinants

Answer: det A = 155

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −10, M₁₂ = −25, M₁₃ = 0

Cofactor expansion

det A = (−3)·(−10) − 5·(−25) + 2·0 = 155

Answer

det A = 155
6.Matrices & determinants

Answer: x = −0.1923

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = (−4)·(−5) − (−1)·6 = 26

Replace the x column

det Aₓ = (−1)·(−5) − (−1)·(−10) = −5
x = −5/26 = −0.1923

Answer

x = −0.1923
y = 1.769
7.Differential equations

Answer: T = 397.9 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 27 + 453·e−0.02t

Substitute t

T(10) = 27 + 453·0.8187 = 397.9 °C

Answer

T = 397.9 °C
8.Differential equations

Answer: y(2) = 6.2

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e∫2/x dx = x2

Integrate

(x2y)′ = 4x4 → x2y = 4x5/5 + C

Initial condition

0 = 4/5 + C → C = −0.8

Evaluate

y(2) = (4·25/5 + (−0.8))/22 = 6.2

Answer

y(2) = 6.2

ExamProblems · examproblems.com/courses/numerical-methods