For a root: check the sign change for bisection, or compute f and f′ for Newton, and keep six or more digits in a table of iterates.
For a table value: interpolate linearly between the two neighbouring points.
For an integral: find h = (b − a)/n, list f at every node, apply the weights (1, 2, …, 2, 1 for trapezoid; 1, 4, 2, …, 4, 1 for Simpson with even n) and multiply by h/2 or h/3.
For an ODE: step from t₀ with yₙ₊₁ = yₙ + h·f(tₙ, yₙ) (Euler) or the averaged slope (Heun), one row per step, until you reach the requested t.
Sequences & series
Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!
Method
Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.
Matrices & determinants
2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
2Practice problems
1.Numerical methodsMedium
Approximate ∫13 1/x dx with the trapezoid rule, n = 4, and compare it with the exact value. Find the absolute error |E| = |T − I|.
f(x) = 1/x[a, b] = [1, 3]n = 4
|E| =
2.Numerical methodsHard
Use Heun's method (improved Euler) with h = 0.2 for y′ = y − t², y(0) = 2 to estimate y2 ≈ y(0.4).
y′ = y − t²y(0) = 2h = 0.2
y2 =
3.Sequences & seriesMedium
Exactly one of the four series diverges. Click it.
A: Σ (2/5)ᵏB: Σ k³/2ᵏC: Σ 1/kD: Σ 1/(k(k + 2))
1A: Σ (2/5)ᵏ
2B: Σ k³/2ᵏ
3C: Σ 1/k
4D: Σ 1/(k(k + 2))
4.Sequences & seriesHard
Find the coefficient c₄ of (x − 1)⁴ in the Taylor series of f(x) = √x about a = 1.
f(x) = √xa = 1k = 4
c₄ =
5.Matrices & determinantsMedium
Let C = AB for the matrices shown. Find the entry c21 (row 2, column 1).
A = [−2 5; −6 3]B = [−3 3; 6 −3]
c21 =
6.Matrices & determinantsHard
Solve the system −4x + 2y = −1 and −x + 5y = 7. Find x.
−4x + 2y = −1−x + 5y = 7
x =
7.Differential equationsMedium
A forged steel part at 500 °C is left to cool in a workshop at 26 °C. After 47 min its temperature is 211 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). How long after the start, t, does it take to reach 413 °C?
T0 = 500 °CTa = 26 °CT(47) = 211 °CT = 413 °C
t = min
8.Differential equationsHard
Solve y′ + y = 5e−3t with y(0) = 0. Find y(2).
y′ + y = 5e−3ty(0) = 0
y(2) =
3Solutions
1.Numerical methods
Answer: |E| = 0.01805
Numerical integration: split [a, b] into n strips of width h = (b − a)/n with nodes x₀ … xₙ. Trapezoid rule: T = (h/2)[f₀ + 2f₁ + 2f₂ + … + 2fn−1 + fₙ]. Simpson's rule (n even): S = (h/3)[f₀ + 4f₁ + 2f₂ + 4f₃ + … + 4fn−1 + fₙ]. The trapezoid error shrinks like h² (bound (b − a)h²·M/12 with M = max|f″|), Simpson's like h⁴, so Simpson is usually far more accurate for the same nodes.
Numerical solution of y′ = f(t, y): Euler's method steps along the slope at the start of each step: yn+1 = yₙ + h·f(tₙ, yₙ). Heun's method (improved Euler) averages the slope at the start and at an Euler prediction: k₁ = f(tₙ, yₙ), k₂ = f(tₙ + h, yₙ + h·k₁), yn+1 = yₙ + (h/2)(k₁ + k₂). The classical Runge–Kutta method (RK4) combines four slopes: yn+1 = yₙ + (h/6)(k₁ + 2k₂ + 2k₃ + k₄). The global error of Euler is proportional to h, Heun's to h², RK4's to h⁴.
Heun steps
y₁ = 2 + (0.2/2)(2 + 2.36) = 2.436
y₂ = 2.436 + (0.2/2)(2.396 + 2.7552) = 2.95112
Graph
y2 = 2.951
Answer
y2 = 2.951
The exact value is y(0.4) = 2.96.
3.Sequences & series
Answer: C: Σ 1/k
Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.
Test each series
A: Σ (2/5)ᵏ → Geometric with r = 2/5, |r| < 1: converges.
B: Σ k³/2ᵏ → Ratio test: L = 1/2 < 1, converges.
C: Σ 1/k → A multiple of the harmonic series (p = 1): diverges.
D: Σ 1/(k(k + 2)) → Smaller than 1/k²: converges by comparison.
The answer
C: Σ 1/k
Answer
C: Σ 1/k
4.Sequences & series
Answer: c₄ = −0.03906
Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.
Derivative f⁽⁴⁾
f⁽⁴⁾(x) = −0.9375·x1/2 − 4
Coefficient
c₄ = −0.9375·11/2 − 4/4! = −0.03906
c₄ = −0.03906
Answer
c₄ = −0.03906
5.Matrices & determinants
Answer: c21 = 36
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Row times column
c21 = (−6)·(−3) + 3·6 = 36
Answer
c21 = 36
6.Matrices & determinants
Answer: x = 1.056
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Determinant of the coefficient matrix
det A = (−4)·5 − 2·(−1) = −18
Replace the x column
det Aₓ = (−1)·5 − 2·7 = −19
x = −19/(−18) = 1.056
Answer
x = 1.056
y = 1.611
7.Differential equations
Answer: t = 10.13 min
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Cooling constant
k = ln(474/185)/47 = 0.02002 min⁻¹
Time to reach the target
t = ln(474/387)/0.02002 = 10.13 min
Answer
t = 10.13 min
8.Differential equations
Answer: y(2) = 0.3321
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.