Nursing Math: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Nursing math & unit conversions

Metric steps
1 kg = 1000 g, 1 g = 1000 mg, 1 mg = 1000 mcg, 1 L = 1000 mL
Weight and length
1 kg = 2.2 lb, 1 lb = 16 oz, 1 in = 2.54 cm, 1 ft = 12 in
Household measures
1 tsp = 5 mL, 1 tbsp = 15 mL, 1 fl oz = 30 mL, 1 cup = 8 fl oz = 240 mL
Temperature
°C = (°F − 32)·5/9, °F = °C·9/5 + 32
24-hour clock
PM hours 1–11: add 12; 12 AM = 00:xx; 12 PM = 12:xx
Dose rate
mcg/min × 60/1000 = mg/h
Laboratory factors
glucose 1 mmol/L = 18 mg/dL; creatinine 1 mg/dL = 88.4 µmol/L; Hb 1 g/dL = 10 g/L

Method

  1. Write the given quantity with its unit and the unit you want.
  2. Pick the equivalent: 1000 between kg, g, mg and mcg or L and mL; 1 kg = 2.2 lb; 1 tsp = 5 mL, 1 tbsp = 15 mL, 1 fl oz = 30 mL, 1 cup = 240 mL.
  3. Write it as a fraction so that the unwanted unit cancels; for a rate, use one fraction per unit that changes.
  4. Check the direction: a smaller unit gives a bigger number.
  5. Round only the final answer, to the precision the question names.

Dosage calculations

Dose from strength
volume = dose / strength
Weight-based dose
dose = mg/kg × body weight
Tablets
number = dose / tablet strength
Units
1 g = 1000 mg, 1 mg = 1000 mcg

Method

  1. Convert the ordered dose and the stock strength to the same unit.
  2. Use desired over have times quantity: (D/H) × Q.
  3. For weight-based doses, multiply by the weight in kg first, then divide the daily dose by the number of doses.
  4. Estimate first and check that the answer is reasonable.

IV infusion rates

Pump rate
mL/h = volume (mL)/time (h)
Drip rate
drops/min = volume (mL) × drop factor / time (min)
Infusion time
time (h) = volume (mL)/rate (mL/h)

Method

  1. Pump rate in mL/h: volume divided by time in hours.
  2. Drip rate in drops/min: volume × drop factor divided by time in minutes.
  3. For time remaining: volume left divided by the rate.
  4. Round as the question or the equipment requires.

IV fluids & fluid balance

Holliday–Segar per hour
4 mL/kg (first 10 kg) + 2 mL/kg (next 10 kg) + 1 mL/kg (each kg above 20)
Holliday–Segar per day
100 / 50 / 20 mL/kg for the same bands
Fluid balance
intake − output
Ice chips
count as half their volume
Urine output
mL/kg/h = mL / (kg × h)
Infusion time
time (h) = volume left (mL) / rate (mL/h)
Volume infused
mL = rate × time

Pediatric & critical-care dosing

Daily dose
mg/day = mg/kg/day × weight (kg)
Doses per day
number = 24 h / dosing interval (h)
Pounds to kilograms
kg = lb / 2.2
Infusion concentration
units/mL = units in bag / bag volume
Pump rate
mL/h = dose per hour / concentration
Titrated drip
mL/h = mcg/kg/min × kg × 60 / (mcg/mL)
Dose from pump rate
mcg/kg/min = mL/h × (mcg/mL) / (60 × kg)
Units
1 mg = 1000 mcg

Pharmacy calculations

Percentage strength
% w/v = g per 100 mL
Amount in a solution
g = % × mL / 100
Ratio strength
1:X = 1 g in X mL; % = 100 / X
Reconstitution
final volume = diluent + powder volume
Concentration
mg/mL = drug in vial / final volume
Alligation
parts of H = T − L, parts of L = H − T
Water or base
0%

2Practice problems

1.Nursing math & unit conversionsMedium
12345678910111210:25 PM?10:2521:2523:2522:25

Practice exercise (made-up values, not clinical guidance). A dose is charted at 10:25 PM. Which entry is the same time on the 24-hour clock? Click it.

10:25 PM
  1. 110:25
  2. 221:25
  3. 323:25
  4. 422:25
2.Nursing math & unit conversionsHard
10 mg/h? mcg/min1 mg = 1000 mcg1 h = 60 min

Practice exercise (made-up values, not clinical guidance). An infusion delivers 10 mg/h. Express this dose rate D in mcg/min. Round to one decimal place.

10 mg/h1 mg = 1000 mcg1 h = 60 min
D = mcg/min
3.Dosage calculationsMedium
024681010 mL

A child weighing 11 kg is prescribed 20 mg/kg of a drug. The stock solution contains 50 mg/mL. Draw up the dose: what volume V do you give?

11 kg20 mg/kg50 mg/mL
V = mL
4.Dosage calculationsHard
25%stockV₁ = ? mL

You must prepare 250 mL of a 0.5% (w/v) solution from a 25% (w/v) stock solution. What volume of stock V₁ do you need?

C₁ = 25%C₂ = 0.5%V₂ = 250 mL
V₁ = mL
5.IV infusion ratesMedium
V = ?15 gtt/mL20 gtt/min12 h

A drip runs at 20 gtt/min through a set of 15 gtt/mL. How many millilitres V does the patient receive in 12 hours?

20 gtt/min15 gtt/mL12 h
V = mL
6.IV infusion ratesHard
300 mL60 gtt/mL50 gtt/mint = ? h

A drip runs at 50 gtt/min through a set of 60 gtt/mL. There are 300 mL left in the bag. How many hours t until it is empty?

50 gtt/min60 gtt/mL300 mL
t = h
7.IV fluids & fluid balanceMedium
IntakeOutput8-hour shiftsoup250 mLjelly100 mLIV infusion60 mL/h × 8 hIV antibiotic1 × 50 mLurine225 mLurine225 mL

Practice exercise (made-up values, not clinical guidance). The record shows a patient's intake and output for one 8-hour shift. The IV infusion ran at the rate shown for the whole shift. Find the fluid balance B = intake − output in mL (a negative answer means a net loss).

soup: 250 mLjelly: 100 mLIV infusion: 60 mL/h × 8 hIV antibiotic: 1 × 50 mLurine: 225 mLurine: 225 mL
B = mL
8.IV fluids & fluid balanceHard
500 mL→ 125 mL/hstart 17:00ttotal​ = ? h75 mL/h × 3 h

Practice exercise (made-up values, not clinical guidance). A 500 mL infusion starts at 17:00 at 75 mL/h. After 3 hours the rate is changed to 125 mL/h and is not changed again. How many hours t after the start will the bag be empty? Round to one decimal place.

500 mL75 mL/h · 3 h125 mL/h
t = h
9.Pediatric & critical-care dosingMedium
100 units250 mLregular insulin8 mL/h? units/h

Practice exercise (made-up values, not clinical guidance). An infusion of 100 units of regular insulin in 250 mL runs at 8 mL/h. How many units per hour D does the patient receive?

100 units/250 mL8 mL/h
D = units/h
10.Pediatric & critical-care dosingHard
4 mg250 mLnorepinephrine? mL/h57 kg12 mcg/min

Practice exercise (made-up values, not clinical guidance). A patient who weighs 57 kg has an order for norepinephrine at 12 mcg/min. The bag contains 4 mg in 250 mL. Find the pump rate R in mL/h. Round to one decimal place.

4 mg/250 mL12 mcg/min57 kg
R = mL/h
11.Pharmacy calculationsMedium
00.10.20.30.40.50.60.70.80.911 mL

A solution has a ratio strength of 1:1000. You need 0.1 mg. Draw up the volume in the 1 mL syringe: what volume V is that?

1:10000.1 mg
V = mL
12.Pharmacy calculationsHard
23%sodium chloride+3%sodium chloride? mL5%300 mL

Practice exercise (made-up values, not clinical guidance). You must prepare 300 mL of 5% sodium chloride by mixing 23% and 3% sodium chloride. How many mL V of the 3% solution do you need? Round to the nearest whole mL.

23%3%5%300 mL
V = mL

3Solutions

1.Nursing math & unit conversions

Answer: 22:25

24-hour clock: from 1 PM onwards add 12 to the hour (3:45 PM = 15:45). Midnight to 12:59 AM is 00:00–00:59, and 12:00–12:59 PM stays 12:00–12:59. Going back, subtract 12 from hours 13–23 and add PM; hours 00 become 12 AM. Count time across midnight in two parts: up to 24:00 (00:00), then from 00:00 on.

Convert the hour

10 PM → 10 + 12 = 22

Answer

22:25

Answer

22:25
2.Nursing math & unit conversions

Answer: D = 166.7 mcg/min

Dimensional analysis: write the given quantity, then multiply by conversion factors written as fractions (for example 60 min/1 h or 1 mg/1000 mcg) so that each unwanted unit appears once on top and once underneath and cancels. When only the wanted unit is left, calculate. Use the equivalents the question gives and round only the final answer.

Set up the chain

D = 10 mg/h × (1000 mcg/1 mg) × (1 h/60 min)

Calculate

D = 10000/60 = 166.7 mcg/min

Answer

D = 166.7 mcg/min
3.Dosage calculations

Answer: V = 4.4 mL

Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.

Dose from body weight

D = 20·11 = 220 mg

Volume

V = 220/50 = 4.4 mL

On the syringe

On this 10 mL syringe every small line is 0.2 mL.

Answer

V = 4.4 mL
4.Dosage calculations

Answer: V₁ = 5 mL

Solution strengths: a percentage strength is grams per 100 mL, so 1% = 1 g/100 mL = 10 mg/mL. A ratio strength 1:1000 means 1 g in 1000 mL = 1 mg/mL; 1:10 000 is 0.1 mg/mL. For a dilution the amount of drug stays the same: C₁·V₁ = C₂·V₂.

Volume of stock

V₁ = 0.5·250/25 = 5 mL

Answer

V₁ = 5 mL
5.IV infusion rates

Answer: V = 960 mL

Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.

Rate in mL/h

20·60/15 = 80 mL/h

Volume

V = 80·12 = 960 mL

Answer

V = 960 mL
6.IV infusion rates

Answer: t = 6 h

Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.

Rate in mL/h

50·60/60 = 50 mL/h

Time left

t = 300/50 = 6 h

Answer

t = 6 h
7.IV fluids & fluid balance

Answer: B = 430 mL

Intake and output: intake counts everything that goes in (oral fluids, IV infusions, IV medications and flushes, tube feeds); ice chips count as half their volume. Output counts urine, drains, vomit and other losses. Balance = total intake − total output; a negative balance is a net loss. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

Total intake

oral: 250 + 100 = 350 mL
IV infusion: 60·8 = 480 mL
IV antibiotic: 1·50 = 50 mL
total intake = 880 mL

Total output

225 + 225 = 450 mL

Balance

B = 880 − 450 = 430 mL

Answer

B = 430 mL

Positive: more fluid went in than came out.

8.IV fluids & fluid balance

Answer: t = 5.2 h

Infusion time: time (h) = volume to infuse (mL)/rate (mL/h); use the volume still left in the bag, not the bag size. Volume infused = rate × time. Convert decimal hours to hours and minutes with the fraction × 60 (0.5 h = 30 min, not 50 min). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

First part

75·3 = 225 mL
500 − 225 = 275 mL left

Second part

275/125 = 2.2 h

Total time

t = 3 + 2.2 = 5.2 h

Answer

t = 5.2 h

That is about 5 h 12 min, so the bag runs out at about 22:12.

9.Pediatric & critical-care dosing

Answer: D = 3.2 units/h

Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

Concentration

100/250 = 0.4 units/mL

Units per hour

D = 8·0.4 = 3.2 units/h

Answer

D = 3.2 units/h
10.Pediatric & critical-care dosing

Answer: R = 45 mL/h

Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

Concentration

4 000/250 = 16 mcg/mL

Dose per hour

The order is per minute for the whole patient, so the weight is not needed.

12·60 = 720 mcg/h

Pump rate

R = 720/16 = 45 mL/h

Answer

R = 45 mL/h
11.Pharmacy calculations

Answer: V = 0.1 mL

Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.

Strength in mg/mL

1000 mg/1000 mL = 1 mg/mL

Volume

V = 0.1/1 = 0.1 mL

Answer

V = 0.1 mL
12.Pharmacy calculations

Answer: V = 270 mL

Alligation: to mix a higher strength H and a lower strength L into a target strength T, take (T − L) parts of H and (H − T) parts of L. The parts are crossed: each stock gets the distance from the target to the other stock. Water or a plain base counts as 0%. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.

Alligation parts

23%: 5 − 3 = 2 parts
3%: 23 − 5 = 18 parts
total: 20 parts

Share the volume

V = 300·18/20 = 270 mL

Answer

V = 270 mL

Check: 30 mL of 23% + 270 mL of 3% = 300 mL.

ExamProblems · examproblems.com/courses/nursing-math