Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). An infusion contains 50 units of regular insulin in 250 mL. The order is 0.05 units/kg/h for a patient who weighs 56 kg. Find the pump rate R in mL/h. Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A dobutamine infusion of 250 mg in 250 mL runs at 21 mL/h. The patient weighs 50 kg. What dose D in mcg/kg/min is the patient receiving? Round to one decimal place.
A patient weighs 15 kg. The prescribed dose is 5 mg/kg per day, given in 3 equal doses. How many milligrams D are given per dose?
The prescription is 3150 units of a drug that comes as 5000 units/mL. Draw up the dose in the 1 mL syringe: what volume V do you give?
An infusion is ordered at 50 mL/h, but no pump is available. It runs by gravity through a giving set of 60 gtt/mL. Find the drip rate R in drops per minute.
A drip runs at 20 gtt/min through a set of 60 gtt/mL. There are 450 mL left in the bag. How many hours t until it is empty?
Answer: R = 14 mL/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: D = 7 mcg/kg/min
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: D = 25 mg
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 0.63 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 1 mL syringe every small line is 0.01 mL.
Answer: R = 50 gtt/min
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
With a microdrip set (60 gtt/mL), gtt/min equals mL/h.
Answer: t = 22.5 h
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
ExamProblems · examproblems.com/courses/pediatric-and-critical-care-dosing