Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). A practice protocol calls for a heparin bolus of 60 units/kg for a patient who weighs 94 kg. The vial contains 5 000 units/mL. What volume V do you draw up? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A dopamine infusion of 400 mg in 250 mL runs at 38 mL/h. The patient weighs 78 kg. What dose D in mcg/kg/min is the patient receiving? Round to one decimal place.
A child weighing 29 kg is prescribed 5 mg/kg of a drug. The stock solution contains 25 mg/mL. Draw up the dose: what volume V do you give?
The prescription is 370 micrograms. The ampoule contains 1 mg/mL. Draw up the dose in the 1 mL syringe: what volume V do you give?
1500 mL was ordered over 10 hours. After 7 hours you find that 530 mL is still in the bag, and the order must still finish on time. To what rate R in mL/h must the pump be reset?
1000 mg of a drug is diluted in 500 mL and given by gravity through a set of 60 gtt/mL. The order is 150 mg per hour. Find the drip rate R in drops per minute.
Answer: V = 1.1 mL
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: D = 13 mcg/kg/min
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: V = 5.8 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 10 mL syringe every small line is 0.2 mL.
Answer: V = 0.37 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
Answer: R = 176.7 mL/h
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Many hospitals allow such an adjustment up to 25% without a new order; check local policy.
Answer: R = 75 gtt/min
Dose-based infusions: concentration = amount of drug in the bag/bag volume. Pump rate (mL/h) = dose per hour/concentration, and dose per hour = mL/h × concentration. Convert per-minute doses to per-hour (× 60) and keep the mass units the same (1 g = 1000 mg, 1 mg = 1000 mcg).
ExamProblems · examproblems.com/courses/pediatric-and-critical-care-dosing