Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). A practice protocol calls for a heparin bolus of 70 units/kg for a patient who weighs 57 kg. The vial contains 5 000 units/mL. What volume V do you draw up? Round to two decimal places.
Practice exercise (made-up values, not clinical guidance). A bag contains dobutamine 500 mg in 250 mL. The order is 12.5 mcg/kg/min for a patient who weighs 109 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
A patient weighing 87 kg has a body surface area of 1.75 m². The prescription is 250 mg/m². Find the dose D in mg.
A patient weighs 143 lb. The prescription is 1 mg/kg as a single dose, and the stock contains 100 mg in 1 mL. Using 1 kg = 2.2 lb, what volume V do you give?
An infusion is ordered at 90 mL/h, but no pump is available. It runs by gravity through a giving set of 20 gtt/mL. Find the drip rate R in drops per minute.
1000 mg of a drug is diluted in 500 mL and given by gravity through a set of 15 gtt/mL. The order is 80 mg per hour. Find the drip rate R in drops per minute.
Answer: V = 0.8 mL
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: R = 40.9 mL/h
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: D = 437.5 mg
Body-surface-area dosing: many cytotoxic and some paediatric doses are prescribed per square metre of body surface area: dose (mg) = dose per m² × BSA (m²). The Mosteller formula estimates BSA = √(height (cm) × weight (kg)/3600).
Answer: V = 0.65 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: R = 30 gtt/min
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: R = 10 gtt/min
Dose-based infusions: concentration = amount of drug in the bag/bag volume. Pump rate (mL/h) = dose per hour/concentration, and dose per hour = mL/h × concentration. Convert per-minute doses to per-hour (× 60) and keep the mass units the same (1 g = 1000 mg, 1 mg = 1000 mcg).
ExamProblems · examproblems.com/courses/pediatric-and-critical-care-dosing