Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). An infusion contains 100 units of regular insulin in 100 mL. The order is 0.05 units/kg/h for a patient who weighs 86 kg. Find the pump rate R in mL/h. Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A patient who weighs 61 kg has an order for norepinephrine at 16 mcg/min. The bag contains 8 mg in 250 mL. Find the pump rate R in mL/h. Round to one decimal place.
A patient weighs 70 kg. The prescribed dose is 30 mg/kg per day, given in 2 equal doses. How many milligrams D are given per dose?
A child weighing 18 kg is prescribed 20 mg/kg per dose of an oral suspension that contains 250 mg in 5 mL. What volume V do you give?
500 mL was ordered over 6 hours. After 3 hours you find that 270 mL is still in the bag, and the order must still finish on time. To what rate R in mL/h must the pump be reset?
A drip runs at 28 gtt/min through a set of 15 gtt/mL. There are 200 mL left in the bag. How many hours t until it is empty? Round to one decimal place.
Answer: R = 4.3 mL/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: R = 30 mL/h
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
The order is per minute for the whole patient, so the weight is not needed.
Answer: D = 1050 mg
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 7.2 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: R = 90 mL/h
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Many hospitals allow such an adjustment up to 25% without a new order; check local policy.
Answer: t = 1.8 h
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
ExamProblems · examproblems.com/courses/pediatric-and-critical-care-dosing