Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
A solution has a ratio strength of 1:1000. You need 0.3 mg. Draw up the volume in the 1 mL syringe: what volume V is that?
Practice exercise (made-up values, not clinical guidance). You must prepare 450 mL of 30% dextrose by mixing 70% and 10% dextrose. How many mL V of the 10% solution do you need? Round to the nearest whole mL.
A patient weighs 30 kg. The prescribed dose is 2 mg/kg per day, given in 2 equal doses. How many milligrams D are given per dose?
The prescription is 0.43 mg. The ampoule contains 500 micrograms per mL. Draw up the dose in the 1 mL syringe: what volume V do you give?
Practice exercise (made-up values, not clinical guidance). After an IV dose of vancomycin, the level is 30 mg/L at 1 h and 12.6 mg/L at 11 h. Assume first-order elimination. Find the half-life t½.
Practice exercise (made-up values, not clinical guidance). A 47-year-old man weighs 62 kg and has a serum creatinine of 1.8 mg/dL (159 µmol/L). Estimate the creatinine clearance with Cockcroft–Gault: CrCl (mL/min) = (140 − age) × weight (kg)/(72 × SCr in mg/dL), × 0.85 for women. The usual digoxin dose is 250 mcg for a creatinine clearance of 120 mL/min, and a fraction fe = 0.7 of the drug is excreted unchanged by the kidneys. Using the Dettli dose fraction Q = 1 − fe·(1 − CrCl/normal CrCl), find the adjusted dose D. Round to the nearest whole number.
Answer: V = 0.3 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 300 mL
Alligation: to mix a higher strength H and a lower strength L into a target strength T, take (T − L) parts of H and (H − T) parts of L. The parts are crossed: each stock gets the distance from the target to the other stock. Water or a plain base counts as 0%. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Check: 150 mL of 70% + 300 mL of 10% = 450 mL.
Answer: D = 30 mg
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 0.86 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
Answer: t½ = 7.99 h
Clearance and volume: at steady state the dosing rate equals the elimination rate, so the maintenance rate = CL × Css. A loading dose is LD = Vd × C/(S × F), with S the salt factor (fraction of active drug in the salt) and F the bioavailability (1 for IV). From two levels, k = ln(C₁/C₂)/Δt; for an IV bolus Vd = dose/C₀ and CL = k × Vd. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: D = 140 mcg
Designing a regimen: with rapid IV doses the level falls from peak to trough during the interval, so τ = ln(Cpeak/Ctrough)/k and the dose that restores the peak is Vd × (Cpeak − Ctrough). The average steady-state level is Css,avg = S·F·dose/(CL·τ). An infusion rises as C = (R/CL)(1 − e−kt). For a drug cleared by the kidneys, the dose is scaled with the creatinine clearance. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
In practice the dose is rounded to a convenient amount and checked against the product information.
ExamProblems · examproblems.com/courses/pharmacy-calculations