Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). A vial contains cefazolin 1000 mg as a powder. The practice label says to add 4.5 mL of sterile water; the powder adds 0.5 mL to the volume. The prescribed dose is 400 mg. What volume V do you draw up? Round to one decimal place.
A vial holds 500 mg of powder. You add 4.2 mL of diluent, and the powder adds 0.8 mL of volume. The prescription is 380 mg. Draw up the dose: what volume V do you give?
A patient weighs 30 kg. The prescribed dose is 5 mg/kg per day, given in 2 equal doses. How many milligrams D are given per dose?
The prescription is 600 micrograms. The ampoule contains 1 mg/mL. Draw up the dose in the 1 mL syringe: what volume V do you give?
Practice exercise (made-up values, not clinical guidance). An 85 kg patient is to receive an aminophylline infusion (salt factor S = 0.8: 80% of aminophylline is theophylline). The theophylline clearance is 0.03 L/kg/h. What aminophylline infusion rate R in mg/h gives a steady-state theophylline level of 15 mg/L?
Practice exercise (made-up values, not clinical guidance). A 47-year-old man weighs 62 kg and has a serum creatinine of 1.2 mg/dL (106 µmol/L). Estimate the creatinine clearance with Cockcroft–Gault: CrCl (mL/min) = (140 − age) × weight (kg)/(72 × SCr in mg/dL), × 0.85 for women. The usual tobramycin regimen is 120 mg every 8 h for a creatinine clearance of 120 mL/min. Keeping the dose, the interval is lengthened in proportion to the fall in clearance. Find the new dosing interval τ. Round to one decimal place.
Answer: V = 2 mL
Reconstitution: the powder takes up space, so the final volume is the diluent plus the powder volume. Concentration = drug in the vial/final volume, and the volume to give = dose/concentration. On a multi-strength label, use the concentration that belongs to the amount of diluent you actually added. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: V = 3.8 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: D = 75 mg
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 0.6 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
Answer: R = 47.81 mg/h
Clearance and volume: at steady state the dosing rate equals the elimination rate, so the maintenance rate = CL × Css. A loading dose is LD = Vd × C/(S × F), with S the salt factor (fraction of active drug in the salt) and F the bioavailability (1 for IV). From two levels, k = ln(C₁/C₂)/Δt; for an IV bolus Vd = dose/C₀ and CL = k × Vd. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: τ = 14.4 h
Designing a regimen: with rapid IV doses the level falls from peak to trough during the interval, so τ = ln(Cpeak/Ctrough)/k and the dose that restores the peak is Vd × (Cpeak − Ctrough). The average steady-state level is Css,avg = S·F·dose/(CL·τ). An infusion rises as C = (R/CL)(1 − e−kt). For a drug cleared by the kidneys, the dose is scaled with the creatinine clearance. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
In practice the interval is rounded to a convenient value such as 12, 24, 36 or 48 h.
ExamProblems · examproblems.com/courses/pharmacy-calculations