Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
A solution has a ratio strength of 1:1000. You need 0.12 mg. Draw up the volume in the 1 mL syringe: what volume V is that?
A vial holds 1000 mg of powder. You add 9.6 mL of diluent, and the powder adds 0.4 mL of volume. The prescription is 50 mg. Draw up the dose: what volume V do you give?
A patient weighs 70 kg and is prescribed 2 mg/kg as a single dose. Find the dose D in mg.
A child weighing 10 kg is prescribed 15 mg/kg per dose of an oral suspension that contains 40 mg in 1 mL. What volume V do you give? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). An 87 kg patient is to be loaded intravenously with aminophylline to reach a theophylline level of 12 mg/L. The volume of distribution is 0.5 L/kg and the salt factor is S = 0.8. Find the loading dose LD of aminophylline in mg.
Practice exercise (made-up values, not clinical guidance). A vancomycin infusion is started without a loading dose. The half-life in this patient is 8 h. How long t does it take to reach 75% of the steady-state level?
Answer: V = 0.12 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 0.5 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: D = 140 mg
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 3.8 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: LD = 652.5 mg
Clearance and volume: at steady state the dosing rate equals the elimination rate, so the maintenance rate = CL × Css. A loading dose is LD = Vd × C/(S × F), with S the salt factor (fraction of active drug in the salt) and F the bioavailability (1 for IV). From two levels, k = ln(C₁/C₂)/Δt; for an IV bolus Vd = dose/C₀ and CL = k × Vd. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
In practice the dose is rounded to a convenient amount.
Answer: t = 16 h
Designing a regimen: with rapid IV doses the level falls from peak to trough during the interval, so τ = ln(Cpeak/Ctrough)/k and the dose that restores the peak is Vd × (Cpeak − Ctrough). The average steady-state level is Css,avg = S·F·dose/(CL·τ). An infusion rises as C = (R/CL)(1 − e−kt). For a drug cleared by the kidneys, the dose is scaled with the creatinine clearance. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
That is 2 half-lives.
ExamProblems · examproblems.com/courses/pharmacy-calculations