Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
A solution has a ratio strength of 1:10 000. You need 0.86 mg. Draw up the volume in the 10 mL syringe: what volume V is that?
A vial holds 1000 mg of powder. You add 4.6 mL of diluent, and the powder adds 0.4 mL of volume. The prescription is 860 mg. Draw up the dose: what volume V do you give?
A vial contains 2 g of powder. The label says: add 7.4 mL of water for injection to give a total volume of 8 mL. The prescription is 750 mg. What volume V of the reconstituted solution do you give?
A patient weighs 103.4 lb. The prescription is 2 mg/kg as a single dose, and the stock contains 250 mg in 5 mL. Using 1 kg = 2.2 lb, what volume V do you give? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A patient receives an IV bolus of 110 mg of tobramycin. The level back-extrapolated to time zero is 6 mg/L and the half-life is 3 h. Find the volume of distribution Vd.
Practice exercise (made-up values, not clinical guidance). A 57 kg patient takes oral theophylline (F = 1) every 8 h. The clearance is 0.03 L/kg/h. Each dose is 250 mg of theophylline. Find the average steady-state level Css,avg.
Answer: V = 8.6 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 4.3 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 3 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 1.9 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: Vd = 18.33 L
Clearance and volume: at steady state the dosing rate equals the elimination rate, so the maintenance rate = CL × Css. A loading dose is LD = Vd × C/(S × F), with S the salt factor (fraction of active drug in the salt) and F the bioavailability (1 for IV). From two levels, k = ln(C₁/C₂)/Δt; for an IV bolus Vd = dose/C₀ and CL = k × Vd. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: Css,avg = 18.27 mg/L
Designing a regimen: with rapid IV doses the level falls from peak to trough during the interval, so τ = ln(Cpeak/Ctrough)/k and the dose that restores the peak is Vd × (Cpeak − Ctrough). The average steady-state level is Css,avg = S·F·dose/(CL·τ). An infusion rises as C = (R/CL)(1 − e−kt). For a drug cleared by the kidneys, the dose is scaled with the creatinine clearance. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
ExamProblems · examproblems.com/courses/pharmacy-calculations