Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
A solution has a ratio strength of 1:1000. You need 0.55 mg. Draw up the volume in the 1 mL syringe: what volume V is that?
Practice exercise (made-up values, not clinical guidance). You must prepare 900 mL of 10% hydrogen peroxide from a 30% stock and purified water. How many mL V of water do you need? Round to the nearest whole mL.
A child weighing 40 kg is prescribed 4 mg/kg of a drug. The stock solution contains 40 mg/mL. Draw up the dose: what volume V do you give?
A child weighing 12 kg is prescribed 10 mg/kg per dose of an oral suspension that contains 125 mg in 5 mL. What volume V do you give?
Practice exercise (made-up values, not clinical guidance). A 67 kg patient is to be loaded intravenously with phenytoin sodium to reach a phenytoin level of 20 mg/L. The volume of distribution is 0.7 L/kg and the salt factor is S = 0.92. Find the loading dose LD of phenytoin sodium in mg.
Practice exercise (made-up values, not clinical guidance). A patient receives vancomycin IV every 12 h; the vancomycin clearance is 6 L/h. What dose D in mg gives an average steady-state level of 25 mg/L?
Answer: V = 0.55 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 600 mL
Alligation: to mix a higher strength H and a lower strength L into a target strength T, take (T − L) parts of H and (H − T) parts of L. The parts are crossed: each stock gets the distance from the target to the other stock. Water or a plain base counts as 0%. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Check: 300 mL of 30% contains 90 g of drug, which is 10% of 900 mL.
Answer: V = 4 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 10 mL syringe every small line is 0.2 mL.
Answer: V = 4.8 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: LD = 1020 mg
Clearance and volume: at steady state the dosing rate equals the elimination rate, so the maintenance rate = CL × Css. A loading dose is LD = Vd × C/(S × F), with S the salt factor (fraction of active drug in the salt) and F the bioavailability (1 for IV). From two levels, k = ln(C₁/C₂)/Δt; for an IV bolus Vd = dose/C₀ and CL = k × Vd. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
In practice the dose is rounded to a convenient amount.
Answer: D = 1800 mg
Designing a regimen: with rapid IV doses the level falls from peak to trough during the interval, so τ = ln(Cpeak/Ctrough)/k and the dose that restores the peak is Vd × (Cpeak − Ctrough). The average steady-state level is Css,avg = S·F·dose/(CL·τ). An infusion rises as C = (R/CL)(1 − e−kt). For a drug cleared by the kidneys, the dose is scaled with the creatinine clearance. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
ExamProblems · examproblems.com/courses/pharmacy-calculations