Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
A solution has a ratio strength of 1:10 000. You need 0.3 mg. Draw up the volume in the 10 mL syringe: what volume V is that?
A vial holds 500 mg of powder. You add 9.5 mL of diluent, and the powder adds 0.5 mL of volume. The prescription is 115 mg. Draw up the dose: what volume V do you give?
A child weighing 28 kg is prescribed 2 mg/kg of a drug. The stock solution contains 10 mg/mL. Draw up the dose: what volume V do you give?
An infusion contains 20000 units of a drug in 500 mL. The prescription is 1250 units per hour. At what rate R do you set the pump, in mL/h?
Practice exercise (made-up values, not clinical guidance). A patient has a lidocaine clearance of 900 mL/min. What infusion rate R in mg/min keeps the steady-state level at 2.5 mg/L?
Practice exercise (made-up values, not clinical guidance). A patient receives vancomycin IV every 12 h; the vancomycin clearance is 5 L/h. What dose D in mg gives an average steady-state level of 20 mg/L?
Answer: V = 3 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 2.3 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 5.6 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 10 mL syringe every small line is 0.2 mL.
Answer: R = 31.25 mL/h
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: R = 2.25 mg/min
Clearance and volume: at steady state the dosing rate equals the elimination rate, so the maintenance rate = CL × Css. A loading dose is LD = Vd × C/(S × F), with S the salt factor (fraction of active drug in the salt) and F the bioavailability (1 for IV). From two levels, k = ln(C₁/C₂)/Δt; for an IV bolus Vd = dose/C₀ and CL = k × Vd. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: D = 1200 mg
Designing a regimen: with rapid IV doses the level falls from peak to trough during the interval, so τ = ln(Cpeak/Ctrough)/k and the dose that restores the peak is Vd × (Cpeak − Ctrough). The average steady-state level is Css,avg = S·F·dose/(CL·τ). An infusion rises as C = (R/CL)(1 − e−kt). For a drug cleared by the kidneys, the dose is scaled with the creatinine clearance. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
ExamProblems · examproblems.com/courses/pharmacy-calculations