Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). A vial contains ceftriaxone 2000 mg as a powder. The practice label says to add 19.2 mL of sterile water; the powder adds 0.8 mL to the volume. The prescribed dose is 1200 mg. What volume V do you draw up? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). You have 40 g of 20% zinc oxide ointment. How many grams m of plain ointment base (0%) must you add to make a 10% ointment? Round to the nearest whole gram.
A patient weighs 30 kg and is prescribed 15 mg/kg as a single dose. Find the dose D in mg.
The prescription is 0.41 mg. The ampoule contains 1000 micrograms per mL. Draw up the dose in the 1 mL syringe: what volume V do you give?
Practice exercise (made-up values, not clinical guidance). An 83 kg patient is to receive an aminophylline infusion (salt factor S = 0.8: 80% of aminophylline is theophylline). The theophylline clearance is 0.05 L/kg/h. What aminophylline infusion rate R in mg/h gives a steady-state theophylline level of 15 mg/L?
Practice exercise (made-up values, not clinical guidance). A vancomycin infusion runs at 100 mg/h with no loading dose. The patient's clearance is 4 L/h and the half-life is 6 h. What is the level C after 3 h?
Answer: V = 12 mL
Reconstitution: the powder takes up space, so the final volume is the diluent plus the powder volume. Concentration = drug in the vial/final volume, and the volume to give = dose/concentration. On a multi-strength label, use the concentration that belongs to the amount of diluent you actually added. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: m = 40 g
Alligation: to mix a higher strength H and a lower strength L into a target strength T, take (T − L) parts of H and (H − T) parts of L. The parts are crossed: each stock gets the distance from the target to the other stock. Water or a plain base counts as 0%. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Check: 40 g + 40 g = 80 g of 10% ointment.
Answer: D = 450 mg
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 0.41 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
Answer: R = 77.81 mg/h
Clearance and volume: at steady state the dosing rate equals the elimination rate, so the maintenance rate = CL × Css. A loading dose is LD = Vd × C/(S × F), with S the salt factor (fraction of active drug in the salt) and F the bioavailability (1 for IV). From two levels, k = ln(C₁/C₂)/Δt; for an IV bolus Vd = dose/C₀ and CL = k × Vd. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: C = 7.322 mg/L
Designing a regimen: with rapid IV doses the level falls from peak to trough during the interval, so τ = ln(Cpeak/Ctrough)/k and the dose that restores the peak is Vd × (Cpeak − Ctrough). The average steady-state level is Css,avg = S·F·dose/(CL·τ). An infusion rises as C = (R/CL)(1 − e−kt). For a drug cleared by the kidneys, the dose is scaled with the creatinine clearance. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
ExamProblems · examproblems.com/courses/pharmacy-calculations