Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). A vial of penicillin G contains 5 000 000 units. Its practice label gives three strengths (see the table). You add 8.2 mL of diluent. The prescribed dose is 750 000 units. What volume V do you draw up? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). You have 30 g of 20% zinc oxide ointment. How many grams m of plain ointment base (0%) must you add to make a 15% ointment? Round to the nearest whole gram.
A patient weighing 35 kg has a body surface area of 1.08 m². The prescription is 50 mg/m². Find the dose D in mg.
A patient weighs 66 lb. The prescription is 15 mg/kg as a single dose, and the stock contains 250 mg in 5 mL. Using 1 kg = 2.2 lb, what volume V do you give?
Practice exercise (made-up values, not clinical guidance). A patient receives an IV bolus of 170 mg of tobramycin. The level back-extrapolated to time zero is 7 mg/L and the half-life is 2.5 h. Find the volume of distribution Vd.
Practice exercise (made-up values, not clinical guidance). A patient receives vancomycin IV every 12 h; the vancomycin clearance is 3 L/h. What dose D in mg gives an average steady-state level of 15 mg/L?
Answer: V = 1.5 mL
Reconstitution: the powder takes up space, so the final volume is the diluent plus the powder volume. Concentration = drug in the vial/final volume, and the volume to give = dose/concentration. On a multi-strength label, use the concentration that belongs to the amount of diluent you actually added. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: m = 10 g
Alligation: to mix a higher strength H and a lower strength L into a target strength T, take (T − L) parts of H and (H − T) parts of L. The parts are crossed: each stock gets the distance from the target to the other stock. Water or a plain base counts as 0%. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Check: 30 g + 10 g = 40 g of 15% ointment.
Answer: D = 54 mg
Body-surface-area dosing: many cytotoxic and some paediatric doses are prescribed per square metre of body surface area: dose (mg) = dose per m² × BSA (m²). The Mosteller formula estimates BSA = √(height (cm) × weight (kg)/3600).
Answer: V = 9 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: Vd = 24.29 L
Clearance and volume: at steady state the dosing rate equals the elimination rate, so the maintenance rate = CL × Css. A loading dose is LD = Vd × C/(S × F), with S the salt factor (fraction of active drug in the salt) and F the bioavailability (1 for IV). From two levels, k = ln(C₁/C₂)/Δt; for an IV bolus Vd = dose/C₀ and CL = k × Vd. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: D = 540 mg
Designing a regimen: with rapid IV doses the level falls from peak to trough during the interval, so τ = ln(Cpeak/Ctrough)/k and the dose that restores the peak is Vd × (Cpeak − Ctrough). The average steady-state level is Css,avg = S·F·dose/(CL·τ). An infusion rises as C = (R/CL)(1 − e−kt). For a drug cleared by the kidneys, the dose is scaled with the creatinine clearance. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
ExamProblems · examproblems.com/courses/pharmacy-calculations