Pick the relation: C = C₀·e−kt, LD = Vd·C/(S·F), maintenance rate = CL·Css/(S·F), τ = ln(Cpeak/Ctrough)/k.
For kidney function, estimate CrCl with Cockcroft–Gault first, then scale the dose or the interval.
Check the result: levels fall by half every half-life, and steady state takes about five half-lives.
2Practice problems
1.Pharmacy calculationsMedium
Practice exercise (made-up values, not clinical guidance). A vial contains cefuroxime 750 mg as a powder. The practice label says to add 7.2 mL of sterile water; the powder adds 0.3 mL to the volume. The prescribed dose is 300 mg. What volume V do you draw up? Round to one decimal place.
750 mg7.2 mL+0.3 mL300 mg
V = mL
2.Pharmacy calculationsHard
Practice exercise (made-up values, not clinical guidance). You must prepare 250 mL of 5% sodium chloride by mixing 23% and 3% sodium chloride. How many mL V of the 3% solution do you need? Round to the nearest whole mL.
23%3%5%250 mL
V = mL
3.Dosage calculationsMedium
A child weighing 17 kg is prescribed 4 mg/kg of a drug. The stock solution contains 20 mg/mL. Draw up the dose: what volume V do you give?
17 kg4 mg/kg20 mg/mL
V = mL
4.Dosage calculationsHard
The prescription is 930 units of a drug that comes as 1000 units/mL. Draw up the dose in the 1 mL syringe: what volume V do you give?
930 units1000 units/mL
V = mL
5.Clinical pharmacokineticsMedium
Practice exercise (made-up values, not clinical guidance). A patient receives an IV bolus of 260 mg of tobramycin. The level back-extrapolated to time zero is 12 mg/L and the half-life is 2.5 h. Find the clearance CL in L/h.
D = 260 mgC₀ = 12 mg/Lt½ = 2.5 h
CL = L/h
6.Clinical pharmacokineticsHard
Practice exercise (made-up values, not clinical guidance). A 57-year-old woman weighs 94 kg and has a serum creatinine of 1.6 mg/dL (141 µmol/L). Estimate the creatinine clearance with Cockcroft–Gault: CrCl (mL/min) = (140 − age) × weight (kg)/(72 × SCr in mg/dL), × 0.85 for women. The usual gentamicin regimen is 80 mg every 8 h for a creatinine clearance of 100 mL/min. Keeping the dose, the interval is lengthened in proportion to the fall in clearance. Find the new dosing interval τ. Round to one decimal place.
Reconstitution: the powder takes up space, so the final volume is the diluent plus the powder volume. Concentration = drug in the vial/final volume, and the volume to give = dose/concentration. On a multi-strength label, use the concentration that belongs to the amount of diluent you actually added. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Final volume
7.2 + 0.3 = 7.5 mL
Concentration
750/7.5 = 100 mg/mL
Volume to give
V = 300/100 = 3 mL
Answer
V = 3 mL
2.Pharmacy calculations
Answer: V = 225 mL
Alligation: to mix a higher strength H and a lower strength L into a target strength T, take (T − L) parts of H and (H − T) parts of L. The parts are crossed: each stock gets the distance from the target to the other stock. Water or a plain base counts as 0%. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Alligation parts
23%: 5 − 3 = 2 parts
3%: 23 − 5 = 18 parts
total: 20 parts
Share the volume
V = 250·18/20 = 225 mL
Answer
V = 225 mL
Check: 25 mL of 23% + 225 mL of 3% = 250 mL.
3.Dosage calculations
Answer: V = 3.4 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
Dose from body weight
D = 4·17 = 68 mg
Volume
V = 68/20 = 3.4 mL
On the syringe
On this 10 mL syringe every small line is 0.2 mL.
Answer
V = 3.4 mL
4.Dosage calculations
Answer: V = 0.93 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
Volume
V = 930/1000 = 0.93 mL
On the syringe
On this 1 mL syringe every small line is 0.01 mL.
Answer
V = 0.93 mL
5.Clinical pharmacokinetics
Answer: CL = 6.007 L/h
Clearance and volume: at steady state the dosing rate equals the elimination rate, so the maintenance rate = CL × Css. A loading dose is LD = Vd × C/(S × F), with S the salt factor (fraction of active drug in the salt) and F the bioavailability (1 for IV). From two levels, k = ln(C₁/C₂)/Δt; for an IV bolus Vd = dose/C₀ and CL = k × Vd. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Volume of distribution
Vd = 260/12 = 21.67 L
Rate constant
k = 0.693/2.5 = 0.2773 h⁻¹
Clearance
CL = 0.2773·21.67 = 6.007 L/h
Answer
CL = 6.007 L/h
6.Clinical pharmacokinetics
Answer: τ = 13.9 h
Designing a regimen: with rapid IV doses the level falls from peak to trough during the interval, so τ = ln(Cpeak/Ctrough)/k and the dose that restores the peak is Vd × (Cpeak − Ctrough). The average steady-state level is Css,avg = S·F·dose/(CL·τ). An infusion rises as C = (R/CL)(1 − e−kt). For a drug cleared by the kidneys, the dose is scaled with the creatinine clearance. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Creatinine clearance (Cockcroft–Gault)
CrCl = (140 − 57)·94/(72·1.6)·0.85 = 57.57 mL/min
New interval
τ = 8·100/57.57 = 13.9 h
Answer
τ = 13.9 h
In practice the interval is rounded to a convenient value such as 12, 24, 36 or 48 h.