Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). A vial contains ampicillin 1000 mg as a powder. The practice label says to add 3.5 mL of sterile water; the powder adds 0.5 mL to the volume. What is the concentration C in mg/mL after reconstitution?
Practice exercise (made-up values, not clinical guidance). You must prepare 600 mL of 25% dextrose by mixing 70% and 10% dextrose. How many mL V of the 70% solution do you need? Round to the nearest whole mL.
A vial contains 500 mg of powder. The label says: add 4.6 mL of water for injection to give a total volume of 5 mL. The prescription is 300 mg. What volume V of the reconstituted solution do you give?
The prescription is 760 micrograms. The ampoule contains 2 mg/mL. Draw up the dose in the 1 mL syringe: what volume V do you give?
Infuse 1000 mL over 6 hours with a giving set of 15 gtt/mL. Find the drip rate R in drops per minute. Round to the nearest whole number.
An infusion of 200 mg in 250 mL runs at 18 mL/h. How many micrograms per minute D does the patient receive?
Practice exercise (made-up values, not clinical guidance). A bag contains 20 000 units of heparin in 500 mL. The order is 20 units/kg/h for a patient who weighs 93 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A patient who weighs 93 kg has an order for nitroglycerin at 5 mcg/min. The bag contains 25 mg in 250 mL. Find the pump rate R in mL/h. Round to one decimal place.
Answer: C = 250 mg/mL
Reconstitution: the powder takes up space, so the final volume is the diluent plus the powder volume. Concentration = drug in the vial/final volume, and the volume to give = dose/concentration. On a multi-strength label, use the concentration that belongs to the amount of diluent you actually added. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: V = 150 mL
Alligation: to mix a higher strength H and a lower strength L into a target strength T, take (T − L) parts of H and (H − T) parts of L. The parts are crossed: each stock gets the distance from the target to the other stock. Water or a plain base counts as 0%. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Check: 150 mL of 70% + 450 mL of 10% = 600 mL.
Answer: V = 3 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 0.38 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
Answer: R = 42 gtt/min
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
At the bedside you round to the nearest whole drop: 42 gtt/min.
Answer: D = 240 mcg/min
Dose-based infusions: concentration = amount of drug in the bag/bag volume. Pump rate (mL/h) = dose per hour/concentration, and dose per hour = mL/h × concentration. Convert per-minute doses to per-hour (× 60) and keep the mass units the same (1 g = 1000 mg, 1 mg = 1000 mcg).
Answer: R = 46.5 mL/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: R = 3 mL/h
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
The order is per minute for the whole patient, so the weight is not needed.
This is independent practice material. ExamProblems is not affiliated with or endorsed by the organisation that runs this exam, and the exam name is used only to describe the content. The PTCE is run by the Pharmacy Technician Certification Board (PTCB), which is not affiliated with ExamProblems and does not endorse it.
ExamProblems · examproblems.com/courses/pharmacy-technician-math