Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). A vial contains ampicillin 1000 mg as a powder. The practice label says to add 3.5 mL of sterile water; the powder adds 0.5 mL to the volume. What is the concentration C in mg/mL after reconstitution?
Practice exercise (made-up values, not clinical guidance). You have 60 g of 20% zinc oxide ointment. How many grams m of plain ointment base (0%) must you add to make a 15% ointment? Round to the nearest whole gram.
A child weighing 11 kg is prescribed 20 mg/kg of a drug. The stock solution contains 25 mg/mL. Draw up the dose: what volume V do you give?
A patient is 180 cm tall and weighs 94 kg. The prescription is 135 mg/m². Using the Mosteller formula BSA = √(height (cm) × weight (kg)/3600), find the dose D in mg.
Infuse 250 mL over 8 hours with a giving set of 60 gtt/mL. Find the drip rate R in drops per minute. Round to the nearest whole number.
1500 mL was ordered over 10 hours. After 2 hours you find that 1390 mL is still in the bag, and the order must still finish on time. By what percentage Δ must the original pump rate be increased?
Practice exercise (made-up values, not clinical guidance). An infusion of 100 units of regular insulin in 250 mL runs at 12 mL/h. How many units per hour D does the patient receive?
Practice exercise (made-up values, not clinical guidance). A dobutamine infusion of 500 mg in 250 mL runs at 28 mL/h. The patient weighs 87 kg. What dose D in mcg/kg/min is the patient receiving? Round to one decimal place.
Answer: C = 250 mg/mL
Reconstitution: the powder takes up space, so the final volume is the diluent plus the powder volume. Concentration = drug in the vial/final volume, and the volume to give = dose/concentration. On a multi-strength label, use the concentration that belongs to the amount of diluent you actually added. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: m = 20 g
Alligation: to mix a higher strength H and a lower strength L into a target strength T, take (T − L) parts of H and (H − T) parts of L. The parts are crossed: each stock gets the distance from the target to the other stock. Water or a plain base counts as 0%. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Check: 60 g + 20 g = 80 g of 15% ointment.
Answer: V = 8.8 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 10 mL syringe every small line is 0.2 mL.
Answer: D = 292.7 mg
Body-surface-area dosing: many cytotoxic and some paediatric doses are prescribed per square metre of body surface area: dose (mg) = dose per m² × BSA (m²). The Mosteller formula estimates BSA = √(height (cm) × weight (kg)/3600).
Answer: R = 31 gtt/min
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
At the bedside you round to the nearest whole drop: 31 gtt/min.
Answer: Δ = 15.83 %
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Many hospitals allow such an adjustment up to 25% without a new order; check local policy.
Answer: D = 4.8 units/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: D = 10.7 mcg/kg/min
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
This is independent practice material. ExamProblems is not affiliated with or endorsed by the organisation that runs this exam, and the exam name is used only to describe the content. The PTCE is run by the Pharmacy Technician Certification Board (PTCB), which is not affiliated with ExamProblems and does not endorse it.
ExamProblems · examproblems.com/courses/pharmacy-technician-math