Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). A vial contains oxacillin 2000 mg as a powder. The practice label says to add 11.5 mL of sterile water; the powder adds 1 mL to the volume. What is the concentration C in mg/mL after reconstitution?
A vial holds 2000 mg of powder. You add 3.2 mL of diluent, and the powder adds 0.8 mL of volume. The prescription is 1500 mg. Draw up the dose: what volume V do you give?
A vial contains 1 g of powder. The label says: add 9.6 mL of water for injection to give a total volume of 10 mL. The prescription is 120 mg. What volume V of the reconstituted solution do you give?
A child weighing 16 kg is prescribed 5 mg/kg per dose of an oral suspension that contains 125 mg in 5 mL. What volume V do you give?
1000 mL was ordered over 8 hours. After 2 hours you find that 800 mL is still in the bag, and the order must still finish on time. To what rate R in mL/h must the pump be reset?
An infusion of 50 mg in 250 mL runs at 15 mL/h. How many micrograms per minute D does the patient receive?
Practice exercise (made-up values, not clinical guidance). A practice protocol calls for a heparin bolus of 80 units/kg for a patient who weighs 79 kg. The vial contains 1 000 units/mL. What volume V do you draw up? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A dopamine infusion of 800 mg in 500 mL runs at 21 mL/h. The patient weighs 75 kg. What dose D in mcg/kg/min is the patient receiving? Round to one decimal place.
Answer: C = 160 mg/mL
Reconstitution: the powder takes up space, so the final volume is the diluent plus the powder volume. Concentration = drug in the vial/final volume, and the volume to give = dose/concentration. On a multi-strength label, use the concentration that belongs to the amount of diluent you actually added. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: V = 3 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 1.2 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 3.2 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: R = 133.3 mL/h
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Many hospitals allow such an adjustment up to 25% without a new order; check local policy.
Answer: D = 50 mcg/min
Dose-based infusions: concentration = amount of drug in the bag/bag volume. Pump rate (mL/h) = dose per hour/concentration, and dose per hour = mL/h × concentration. Convert per-minute doses to per-hour (× 60) and keep the mass units the same (1 g = 1000 mg, 1 mg = 1000 mcg).
Answer: V = 6.3 mL
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: D = 7.5 mcg/kg/min
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
ExamProblems · examproblems.com/courses/pharmacy-technician-math