Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.
A solution has a ratio strength of 1:10 000. You need 0.46 mg. Draw up the volume in the 10 mL syringe: what volume V is that?
Practice exercise (made-up values, not clinical guidance). You have 120 g of 10% salicylic acid ointment. How many grams m of 2% salicylic acid ointment must you add to make a 3% ointment? Round to the nearest whole gram.
A patient weighs 30 kg. The prescribed dose is 15 mg/kg per day, given in 3 equal doses. How many milligrams D are given per dose?
A patient weighs 103.4 lb. The prescription is 10 mg/kg as a single dose, and the stock contains 250 mg in 5 mL. Using 1 kg = 2.2 lb, what volume V do you give?
Infuse 1500 mL over 5 hours with a giving set of 20 gtt/mL. Find the drip rate R in drops per minute.
A bag contains 2 g of a drug in 250 mL. The order is 1.5 mg per minute. At what rate R do you set the pump, in mL/h?
Practice exercise (made-up values, not clinical guidance). A bag contains 12 500 units of heparin in 250 mL. The order is 20 units/kg/h for a patient who weighs 61 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A bag contains dopamine 400 mg in 250 mL. The order is 12 mcg/kg/min for a patient who weighs 69 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
Answer: V = 4.6 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: m = 840 g
Alligation: to mix a higher strength H and a lower strength L into a target strength T, take (T − L) parts of H and (H − T) parts of L. The parts are crossed: each stock gets the distance from the target to the other stock. Water or a plain base counts as 0%. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Check: 120 g + 840 g = 960 g of 3% ointment.
Answer: D = 150 mg
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 9.4 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: R = 100 gtt/min
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: R = 11.25 mL/h
Dose-based infusions: concentration = amount of drug in the bag/bag volume. Pump rate (mL/h) = dose per hour/concentration, and dose per hour = mL/h × concentration. Convert per-minute doses to per-hour (× 60) and keep the mass units the same (1 g = 1000 mg, 1 mg = 1000 mcg).
Answer: R = 24.4 mL/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: R = 31.1 mL/h
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
This is independent practice material. ExamProblems is not affiliated with or endorsed by the organisation that runs this exam, and the exam name is used only to describe the content. The PTCE is run by the Pharmacy Technician Certification Board (PTCB), which is not affiliated with ExamProblems and does not endorse it.
ExamProblems · examproblems.com/courses/pharmacy-technician-math